Waveshare RS485 to Ethernet Converter User Manual

1. Introdución

The Waveshare RS485 to Ethernet Converter (Model: RS485 TO ETH) is a device designed to facilitate communication between RS485 serial devices and an Ethernet network. It enables seamless data exchange, allowing RS485 devices to be integrated into modern IP-based systems. This manual provides essential information for the proper setup, operation, and maintenance of the converter.

Figure 1: Waveshare RS485 to Ethernet Converter with included power adapter. This image displays the Waveshare RS485 to Ethernet Converter unit alongside its power adapter. The converter features a black casing with green labels indicating DC 5V power input, Ethernet port, and RS485 screw terminals (A+, B-, GND). The power adapter is a standard wall plug type.

2. Produto rematadoview e Características

The Waveshare RS485 to Ethernet Converter is built with a focus on performance and reliability. Key features include:

M0 series 32-bit ARM processor for fast and efficient operation.
10/100M Auto-MDI/MDIX Ethernet interface, compatible with both cross-over and straight-through cables.
Configurable RS485 baud rate from 600bps to 230.4Kbps, supporting None, Odd, Even, Mark, and Space parity options.
Multiple working modes: TCP Server, TCP Client, UDP Server, UDP Client, and HTTPD Client (supports GET and POST).
Flexible configuration options via webpage, AT commands, serial protocol, and network protocol.
Support for customized heartbeat and registration packets for connection verification and device identification.
Personalizable webpage for module configuration.
RFC2217-like protocol support for devices with changing serial settings.
KeepAlive mechanism for detecting broken connections and automatic re-connection.
Time-out reboot (no-data reboot) for long-term stable connections, with configurable reboot time.
DNS domain name resolution and configurable DNS server.
DHCP support for auto-obtained IP or static IP configuration.
Firmware upgradable via the network.
Hardware and software options for restoring to factory settings.
Customizable MAC address.

3. Configuración

Follow these steps to set up your Waveshare RS485 to Ethernet Converter:

Conexión de alimentación: Connect a DC 5V power supply to the DC 5V input jack on the converter. The recommended input voltage é 5.0-7.0 V.
Conexión Ethernet: Connect an Ethernet cable from the converter's RJ45 port to your network switch or router. The converter supports 10/100M Auto-MDI/MDIX.
Conexión RS485: Connect your RS485 device to the green screw terminal block. Ensure correct polarity for A+ (positive), B- (negative), and GND (ground).
Configuración inicial: The device comes with default network settings. These are typically printed on a label on the bottom of the unit.

Figure 2: Bottom label of Waveshare RS485 to Ethernet Converter showing default network settings. The bottom of the converter unit displays a label with essential network configuration details: Model: RS485 TO ETH, Username: admin, Default IP: 192.168.0.7, Password: admin, MAC address, and Input power requirements (DC5-7V/500mA). The manufacturer's website, www.waveshare.net, is also listed.

For detailed setup instructions and advanced configurations, refer to the official Waveshare product wiki at www.waveshare.net.

4. Modos de funcionamento

The converter supports various operating modes to suit different application requirements:

TCP Server: The converter listens for incoming TCP connections from clients.
TCP Client: The converter initiates a TCP connection to a specified server.
UDP Server: The converter listens for incoming UDP packets.
UDP Client: The converter sends UDP packets to a specified destination.
HTTPD Client: The converter can act as an HTTP client, supporting GET and POST requests.

5. Configuración

The Waveshare RS485 to Ethernet Converter offers multiple methods for configuration:

Webpage Configuration: Access the converter's built-in web interface using its IP address (default: 192.168.0.7) in a web browser. Use the default username 'admin' and password 'admin' for login.
Comandos AT: Configure the device using AT commands sent via the serial port.
Protocolo de serie: Utilize a dedicated serial protocol for configuration.
Protocolo de rede: Configuration can also be performed over the network using specific protocols.

Actualización de firmware: The device's firmware can be updated over the network, ensuring access to the latest features and improvements.

Restablecemento de fábrica: The converter can be restored to its factory default settings via both software commands and a hardware reset button (Reload button).

6. Software

Waveshare provides supporting software to assist with the use and configuration of the converter:

Module Configuration Software: A dedicated application for configuring the converter's parameters.
TCP/UDP Testing Tool: Software for testing TCP and UDP communication.
VCOM Virtual Serial Port Software: Allows the Ethernet port to be mapped as a virtual serial port on a computer.

Example code for various platforms (e.g., host computer socket, VB, C++, Delphi, Android, iOS) is also available from the manufacturer.

7. Especificacións

Figure 3: Technical specifications and dimension diagram for Waveshare RS485 to Ethernet Converter. A detailed diagram presenting the technical specifications for Ethernet, RS485, Power, and Environment, along with precise dimensions of the converter unit in millimeters. Key measurements like length, width, and height are indicated.

Waveshare RS485 to Ethernet Converter Specifications
Categoría	Parámetro	Valor
Ethernet	Conector	RJ45
	Taxa de comunicación	10/100 Mbps
	Protección de interface	1.5KV electromagnetic isolation
	Protocolos	IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
	TX/RX Cache	6Kbyte / 4Kbyte
RS485	Conector	Screw terminal (A+, B-, GND)
	Bit de datos	5 bits, 6 bits, 7 bits, 8 bits
	Stop Bit	1, 2
	Verificación de paridade	Ningún, impar, par, marca, espazo
	velocidade en baudios	600bps-230.4Kbps
	Protección de interface	2KV ESD protection, RS485 pull up/down resistors: 2.2KΩ
Poder	Fonte de alimentación	5.0-7.0V (5V recommended)
	Corrente de funcionamento	150 mA (@5 V)
	Consumo de enerxía	<1 W
	Protección de interface	Reverse-proof, ESD protection, anti-surge
Medio ambiente	Temperatura de funcionamento	-25~75°C
Medio ambiente	Temperatura de almacenamento	-40~105°C
Dimensións	Unit (L x W x H)	63.59mm x 41.13mm x 25.47mm (approximate, excluding mounting tabs)

8 Solución de problemas

If you encounter issues with your Waveshare RS485 to Ethernet Converter, consider the following:

Sen conexión de rede: Verify that the Ethernet cable is securely connected and that your network infrastructure (router/switch) is functioning correctly. Check the converter's network indicator lights.
Non se pode acceder Web Interface: Ensure your computer's IP address is in the same subnet as the converter's default IP (192.168.0.7). If the IP has been changed, try to recall the new IP or perform a factory reset.
RS485 Communication Failure: Double-check the RS485 wiring for correct A+ and B- polarity. Ensure the baud rate, data bits, stop bits, and parity settings on the converter match those of your RS485 device.
Problemas de enerxía: Confirm that the power adapter is correctly connected and providing the specified DC 5V (5.0-7.0V) power.
Protocolo Modbus: Please note that this converter does non natively support Modbus protocol. If your application requires Modbus, additional software or gateway solutions may be necessary.
Inestabilidade xeral: If the device experiences intermittent issues, consider performing a factory reset and reconfiguring it. Ensure the operating environment is within specified temperature ranges.

For more in-depth troubleshooting guides and technical support, visit the official Waveshare websitio.

9. Mantemento

To ensure the longevity and reliable operation of your converter:

Manteña o dispositivo limpo e libre de po. Use un pano suave e seco para limpalo.
Operate the device within the specified environmental conditions (temperature and humidity).
Evite expoñer o dispositivo a unha humidade excesiva ou a temperaturas extremas.
Asegure unha ventilación adecuada ao redor da unidade para evitar o sobreenriquecido.

10. Garantía e soporte

For information regarding product warranty, technical support, and additional resources, please refer to the official Waveshare websitio:

www.waveshare.net

O website provides comprehensive documentation, software downloads, and contact information for customer assistance.

	Manual do usuario do servidor serie Waveshare RS232/485 a WiFi PoE Ethernet (B) Explora o Manual do usuario de Waveshare RS232/485 a WiFi PoE Ethernet (B), unha guía completa para o servidor serie que converte interfaces de rede RS232/485 a TCP/IP, o que permite a transmisión de datos bidireccional a través de WiFi e Ethernet.
	Manual do usuario de Waveshare UART a ETH (B): Guía do conversor de serie a Ethernet Manual de usuario completo para o módulo Waveshare UART TO ETH (B), que detalla as súas características como conversor UART a Ethernet, pasarela de IoT, pasarela Modbus e servidor serie para aplicacións industriais.
	Manual do usuario da comunicación Waveshare RS485 a WiFi/ETH MQTT Manual de usuario completo para o módulo Waveshare RS485 a WiFi/ETH, que guía aos usuarios a través da preparación do software e hardware, a configuración da rede e o establecemento da comunicación MQTT con plataformas como EMQX.
	Waveshare RS485 TO ETH (B) User Manual - Industrial RS485 to Ethernet IoT Gateway Comprehensive user manual for the Waveshare RS485 TO ETH (B), an industrial serial device server and IoT gateway. Learn about its features, applications, configuration, and how to connect RS485 devices to Ethernet for Modbus, MQTT, and cloud integration.
	Waveshare RS232/485 TO WIFI ETH (B) User Manual: Setup, Features, and Applications Comprehensive user manual for the Waveshare RS232/485 TO WIFI ETH (B) serial server. Learn about its features, hardware and network setup, data transmission, various working modes, and application scenarios for industrial and IoT communication.
	Especificación técnica da pasarela Ethernet RS232/RS485 a Ethernet e PoE Este documento proporciona especificacións detalladas, características de hardware e software e procedementos de proba para as pasarelas Waveshare RS232/RS485 a Ethernet e PoE Ethernet. Estes dispositivos funcionan como servidores serie, pasarelas Modbus e pasarelas MQTT para a adquisición de datos industriais e a conectividade IoT.