Beghelli 19432 LED Emergency Lamp Manual de usuario

Introdución

This manual provides essential information for the safe and efficient use of your Beghelli 19432 LED Emergency Lamp. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functioning and to prevent damage or injury.

The Beghelli 19432 is a high-performance LED emergency lamp designed for reliable illumination during power outages or emergency situations. It features a robust polycarbonate construction and a powerful 1200 lumen LED light source with Li-Fe battery technology.

Información de seguridade

Always adhere to the following safety guidelines to prevent electric shock, fire, or injury:

• Asegúrese de que a fonte de alimentación estea desconectada antes da instalación ou mantemento.
• A instalación debe ser realizada por un electricista cualificado de acordo coas normas eléctricas locais.
• Non expoña o lamp a humidade excesiva ou temperaturas extremas.
• Non intente abrir nin modificar o lamp housing, as this may void the warranty and pose a safety risk.
• Manteña os materiais de embalaxe lonxe dos nenos.

Contido do paquete

Verificar que todos os compoñentes estean presentes e sen danos:

• Beghelli 19432 LED Emergency Lamp unidade
• Integrated Li-Fe Battery
• Accesorios de montaxe (parafusos, tacos)
• Manual de usuario (este documento)

Configuración e instalación

The Beghelli 19432 emergency lamp is designed for wall mounting. Follow these steps for proper installation:

1. Escolle unha localización: Select a suitable location for installation, typically near an exit or in a common area, ensuring the light can illuminate the required path during an emergency. The lamp is designed for indoor use in commercial or emergency exit applications.
2. Prepare a superficie de montaxe: Ensure the wall surface is clean, dry, and capable of supporting the lampo peso de .
3. Marcar os puntos de perforación: Use o lamp's mounting holes as a template to mark the drilling points on the wall.
4. Perforación: Drill holes at the marked points using an appropriate drill bit for the wall plugs.
5. Inserir tacos de parede: Insira os tacos de parede proporcionados nos orificios perforados.
6. Monta o Lamp: Asegure o lamp to the wall using the provided screws. Ensure it is firmly attached.
7. Conectar enerxía: Conecta o lamp to the main power supply according to the wiring diagram (refer to the diagram usually found inside the lamp's cover or on a separate sheet, not provided here). Ensure correct polarity and secure connections. The lamp is battery-operated but requires a constant power supply to keep the battery charged and for automatic operation.
8. Carga inicial: After installation, allow the lamp to charge for at least 24 hours before its first use to ensure the battery is fully charged.

Image: The Beghelli 19432 LED Emergency Lamp, featuring its sleek white polycarbonate housing and the transparent light diffuser, designed for efficient light distribution.

Instrucións de funcionamento

The Beghelli 19432 operates automatically:

• Funcionamento normal: When connected to the main power supply, the lamp's battery will charge, and the lamp will remain off (or in standby mode, depending on configuration).
• Modo de emerxencia: In the event of a power failure, the lamp will automatically switch on, providing 1200 lumens of illumination from its internal Li-Fe battery.
• Volver á normalidade: Once main power is restored, the lamp will automatically switch off and begin recharging its battery.
• Test Button (if applicable): Some models may include a test button to manually check the emergency function. Press and hold the button to simulate a power outage and verify the lamp illuminates. Release the button to return to normal operation. (Note: Specific button location and function may vary; refer to product labeling if present.)

Mantemento

Regular maintenance ensures the longevity and reliability of your emergency lamp:

• Limpeza: Limpar o lamp's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Comprobación da batería: Perform a monthly functional test by simulating a power outage (e.g., by pressing the test button or temporarily disconnecting power) to ensure the battery holds a charge and the lamp illuminates for the specified duration.
• Annual Discharge Test: Annually, perform a full discharge test. Disconnect the main power supply and allow the lamp to operate until the battery is fully depleted. Then, reconnect power and allow it to recharge for 24-48 hours. This helps maintain battery health.
• Substitución da batería: The integrated Li-Fe battery has a long lifespan but will eventually require replacement. This should only be performed by qualified personnel. Contact Beghelli support for authorized service.
• Lamp Substitución: The LED light source is designed for long-term use and is generally not user-replaceable. If the LEDs fail, the entire unit may need replacement.

Resolución de problemas

Consulta a táboa seguinte para ver os problemas comúns e as súas solucións:

Se atopa problemas que non aparecen na lista ou se as solucións suxeridas non resolven o problema, póñase en contacto co servizo de atención ao cliente de Beghelli.

Especificacións

Garantía e Soporte

For warranty information, please refer to the documentation provided with your purchase or visit the official Beghelli website. Beghelli products are designed for durability and performance.

For technical support, service, or inquiries regarding replacement parts, please contact Beghelli customer service through their official channels. Contact information can typically be found on the Beghelli websitio web ou na embalaxe do produto.

Información de reciclaxe: For information on recycling this product, particularly the lamp and battery components, please refer to local regulations and recycling guidelines. Specific information regarding lamp recycling and disposal of broken or damaged lamps can often be found on the manufacturer's website or through local waste management services.