Introdución
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your BWT D300 Pool Robot. Please read this manual thoroughly before using the device and keep it for future reference.
Instrucións de seguridade
- Desconecte sempre a fonte de alimentación antes de realizar calquera mantemento ou limpeza.
- Do not operate the robot if the power cable is damaged. Contact qualified service personnel for repair.
- Ensure the robot is fully submerged before starting operation.
- Keep children and pets away from the pool area during robot operation.
- Use only original BWT replacement parts and accessories.
- Almacene o robot nun lugar fresco e seco cando non estea en uso.
Configuración
Siga estes pasos para a configuración inicial:
- Desembalaxe: Carefully remove the pool robot from its packaging.
- Preparación do filtro: Clean the filter before the first use to ensure optimal performance.
- Colocación na piscina: Gently place the pool robot into the pool. Ensure it sinks to the bottom.
- Conexión de alimentación: Connect the robot's power supply to a suitable electrical outlet.
Figura 1: The BWT D300 Pool Robot, designed to clean the floor, walls, and waterline of pools up to 12 meters in length. It features convenient app control for easy operation.
Operación
The BWT D300 Pool Robot offers intelligent navigation and can be controlled via a dedicated app.
- Starting the Robot: You can start the pool robot either via the dedicated mobile application or by pressing the button on the control unit.
- Control da aplicación: Download the BWT app from your device's app store. Connect to the robot via Bluetooth for remote control and setting cleaning cycles.
- Ciclo de limpeza: The robot will automatically clean the pool floor, walls, and waterline using its smart navigation system and gyroscopic sensors.
Figura 2: A hand holding a smartphone displaying the BWT app interface, which allows for convenient control of the pool robot via Bluetooth.
Figura 3: The BWT D300 Pool Robot submerged and actively cleaning the pool floor, demonstrating its innovative control system and smart navigation capabilities.
Mantemento
Regular maintenance ensures the longevity and optimal performance of your BWT D300 Pool Robot.
- Limpeza de filtros: After each cleaning cycle, remove the robot from the pool and clean its filter. The 4D filtration technology captures even the smallest impurities.
- Limpeza de mangueiras: Rinse the robot and its cable with fresh water after use to remove chlorine and debris.
- Almacenamento: Store the robot and its power supply in a dry, shaded area when not in use. The included caddy facilitates easy transport and storage.
Figura 4: A person cleaning the easily accessible 4D filter of the BWT D300 Pool Robot with a hose, highlighting its design for capturing even the finest particles.
Figura 5: The BWT D300 Pool Robot positioned on its transport caddy, demonstrating its very simple handling, anti-tangle device, and compact power supply.
Resolución de problemas
This section addresses common issues you might encounter with your BWT D300 Pool Robot.
| Problema | Causa posible | Solución |
|---|---|---|
| O robot non arranca. | No power supply; cable damaged; control unit error. | Check power connection. Inspect cable for damage. Restart control unit. |
| Mal rendemento de limpeza. | Clogged filter; worn brushes; insufficient submersion. | Clean filter thoroughly. Check brushes for wear and replace if necessary. Ensure robot is fully submerged. |
| Robot does not move or gets stuck. | Obstruction; tangled cable; motor issue. | Remove any obstructions. Untangle the cable. If problem persists, contact support. |
| Problemas de conexión coa aplicación. | Bluetooth not enabled; robot out of range; app error. | Ensure Bluetooth is on. Move closer to the robot. Restart the app or your phone. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact BWT customer support.
Especificacións
- Marca: BWT
- Nome do modelo: BWT Pool-Roboter D300 APP
- Número de modelo: 125305504
- Característica especial: Easy to clean, excellent suction power, intelligent navigation, 4D filtration technology, easy app operation.
- Método de control: Aplicación
- Tipo de instalación: Robótica
- Material: Aceiro inoxidable
- Fonte de enerxía: Eléctrico con cable
- Peso do artigo: 11 quilogramos
- Apto para piscinas: Up to 12 meters in length, up to 100 m² surface area.
- Cobertura de limpeza: Floor, Walls, Waterline.
Garantía e Soporte
The BWT D300 Pool Robot comes with a limited warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official BWT websitio.
For technical support, spare parts, or service inquiries, please contact BWT customer service. Contact details can typically be found on the BWT websitio web ou na documentación da súa compra.
Non se atoparon vídeos oficiais do vendedor para este produto nos datos proporcionados.
