Nobsound T3 MM Phono Preampmáis vivo

1. Introdución

The Nobsound T3 is a Moving Magnet (MM) phono preamplifier designed to convert phono signals from a turntable to line-level signals. This device is essential for connecting a turntable to audio systems that lack a dedicated phono input, such as stereo amplifiers or active speakers. It features a volume control to adjust the output level.

Image: The Nobsound T3 phono preamplifier integrated into a home audio setup with a turntable and speakers.

2. Información de seguridade

• Asegúrate de que o adaptador de corrente volvatage coincide coa súa fonte de alimentación local.
• Non expoña o dispositivo á humidade nin a temperaturas extremas.
• Avoid disassembling the unit; refer servicing to qualified personnel.
• Place the unit on a stable, flat surface to prevent accidental falls.
• Manter fóra do alcance dos nenos.

3. Contido do paquete

• Nobsound T3 MM Phono Preampmáis vivo
• Adaptador de corriente DC 12V

Image: The Nobsound T3 phono preamplifier and its included DC 12V power adapter.

4. Produto rematadoview

The Nobsound T3 features a compact design with essential controls and connections for seamless integration into your audio system.

Panel frontal

• Interruptor POWER: Toggles the unit on/off. Features a red indicator light when active.
• Botón VOLUME: Adjusts the output level of the preampmáis vivo.

Panel traseiro

• Terminal de terra: Ground connection for the turntable to reduce hum and noise.
• MM INPUT (R/L): RCA inputs for connecting your Moving Magnet (MM) turntable.
• AUDIO OUTPUT (R/L): RCA outputs for connecting to your amplifier ou altofalantes activos.
• DC 12 V: Power input for the included 12V DC adapter.

Imaxe: Detallada view of the Nobsound T3's front panel (Power switch, Volume knob) and rear panel (GND, MM Input, Audio Output, DC 12V).

5. Configuración

Follow these steps to connect your Nobsound T3 phono preamplifier to your audio system:

1. Connect Turntable to MM Input: Use RCA cables to connect the audio output of your MM turntable to the MM INPUT (R/L) jacks on the rear panel of the Nobsound T3. Ensure left (white) and right (red) channels are matched.
2. Conecte o cable de terra: Attach the ground wire from your turntable to the GND terminal on the Nobsound T3. This helps to minimize hum and noise.
3. Conectar a Amplificador/Oradores: Use another set of RCA cables to connect the AUDIO OUTPUT (R/L) jacks of the Nobsound T3 to an available line-level input (e.g., AUX, CD, LINE IN) on your amplifier or active speakers. Do not connect to a phono input on your amplifier, as this unit already provides phono pre-amplificación.
4. Conectar enerxía: Plug the DC 12V power adapter into the DC 12 V input on the rear panel of the Nobsound T3, then plug the adapter into a power outlet.
5. Encendido: Preme o POTENCIA switch on the front panel to turn on the unit. The red indicator light will illuminate.

Image: Connection diagram illustrating how to integrate the Nobsound T3 into an audio system.

6. Instrucións de funcionamento

Once the Nobsound T3 is properly set up, operating it is straightforward:

1. Ensure all connections are secure and the unit is powered on.
2. Start playing a record on your turntable.
3. Axustar o VOLUME knob on the front panel of the Nobsound T3 to achieve the desired output level.
4. Further volume adjustments can be made using your amplifier or active speakers' volume control.

7. Mantemento

• Limpa a unidade cun pano suave e seco. Non empregues produtos de limpeza líquidos nin disolventes.
• Keep the unit free from dust and debris to ensure proper ventilation.
• Periodically check all cable connections for tightness and wear.

8 Solución de problemas

Sen saída de son

• Ensure the Nobsound T3 is powered on (red indicator light is lit).
• Verify all RCA cables are securely connected to the correct input/output jacks.
• Check the volume level on both the Nobsound T3 and your amplifier/altofalantes activos.
• Confirma o teu amplifier/active speakers are set to the correct input source.

Zumbido ou ruído

• Ensure the turntable's ground wire is properly connected to the GND terminal on the Nobsound T3.
• Comprobe se hai conexións de cable soltas.
• Afaste a unidade doutros dispositivos electrónicos que poidan causar interferencias.
• Try using different RCA cables, as faulty shielding can cause hum.

9. Especificacións

Image: The Nobsound T3 phono preamplifier shown in hand, highlighting its compact dimensions.

10. Garantía e soporte

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Douk Audio customer service. Keep your purchase receipt for warranty claims.