1. Introdución
Grazas pola compraasing the BeamZ LF1500 Professional Heavy Fog Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before first use and keep it for future reference.
Produto rematadoview
The BeamZ LF1500 is a professional heavy fog machine designed to produce ground-hugging fog effects without the need for dry ice. It utilizes advanced ultrasonic technology to create a dense, low-lying fog using standard fog fluid and water. Its robust flight case with wheels ensures easy transport and protection, making it ideal for various events and professional applications.
Figure 1: BeamZ LF1500 Heavy Fog Machine with its flexible fog output hose and nozzle.
2. Instrucións de seguridade
Observe sempre as seguintes precaucións de seguridade para evitar descargas eléctricas, incendios ou lesións:
- Ensure the unit is connected to a grounded power outlet (230Vac / 50Hz).
- Non fagas funcionar a máquina se o cable de alimentación está danado.
- Keep the machine away from flammable materials.
- Use only BeamZ approved fog fluid and demineralized water.
- Do not touch hot surfaces during or immediately after operation.
- Asegúrese de que haxa unha ventilación axeitada arredor da máquina.
- Non sumerxa a unidade en auga ou outros líquidos.
- Manter fóra do alcance dos nenos.
- Desconectar da corrente antes de limpar ou realizar o mantemento.
3. Configuración
- Desembalaxe: Retire con coidado a máquina da súa embalaxe. Inspeccione se sufriu algún dano durante o transporte.
- Colocación: Place the machine on a stable, level surface. Ensure there is sufficient space around the unit for ventilation.
- Recheo de fluídos:
- Open the fluid reservoir cap.
- Fill the 5-liter reservoir with a mixture of BeamZ standard fog fluid and demineralized water. Refer to the fog fluid instructions for recommended ratios.
- Securely close the reservoir cap.
- Conexión da mangueira: Attach the flexible fog output hose to the designated port on the machine. Ensure it is securely fastened to prevent leaks.
- Conexión de alimentación: Connect the power cable to a suitable 230Vac / 50Hz grounded power outlet.
4. Instrucións de funcionamento
Initial Power-On and Warm-up
Once connected to power, the machine will automatically begin its warm-up cycle. The warm-up time is approximately 8 minutes. The display will indicate when the machine is ready for operation.
Modos de control
The BeamZ LF1500 can be controlled via DMX or manually.
Operación manual
Use the integrated digital display and control buttons to adjust settings directly on the unit. You can control:
- Saída de néboa: Adjust the intensity of the fog production.
- Velocidade do ventilador: Control the speed of the internal fan, which affects the spread and density of the fog.
- Continuous Fog: The machine supports continuous fog output once warmed up.
Operación DMX
For advanced control and integration into lighting setups, connect a DMX controller to the 3-pin XLR DMX input/output ports. The machine supports 1 or 2 DMX channels. Refer to the DMX chart below for channel assignments and values.
| Canle | Función | Intervalo de valores | Descrición |
|---|---|---|---|
| 1 | Saída de néboa | 0-255 | 0 = Off, 1-255 = Fog output intensity (0-100%) |
| 2 | Velocidade do ventilador | 0-255 | 0 = Off, 1-255 = Fan speed (0-100%) |
5. Mantemento
Regular maintenance ensures the longevity and optimal performance of your BeamZ LF1500.
- Substitución de fluídos: Always use fresh, clean fog fluid and demineralized water. Do not mix different types of fluid.
- Limpeza:
- Limpa periodicamente o exterior da máquina cun pano suave e seco.
- Ensure the air vents are free from dust and debris to prevent overheating.
- If the machine is stored for extended periods, it is recommended to run a cleaning solution (distilled water) through the system to prevent clogs.
- Almacenamento: Store the machine in a cool, dry place. If storing for a long time, empty the fluid reservoir.
6 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Sen saída de néboa |
|
|
| saída de néboa débil |
|
|
| A máquina non se acende |
|
|
If problems persist after attempting these solutions, please contact BeamZ customer support or a qualified service technician.
7. Especificacións
| Característica | Especificación |
|---|---|
| Número de modelo | LF1500 (160.748) |
| Fonte de alimentación | 230Vac/50Hz |
| Tempo de quecemento | Aprox. 8 minutos |
| Capacidade do tanque de fluído | 5 litros |
| Modos de control | DMX, manual |
| Canles DMX | 1 ou 2 |
| Conexión DMX | XLR de 3 pines |
| Dimensións (L x W x H) | 630 x 350 x 480 mm |
| Peso | 25.6 kg |
| Tecnoloxía | Ultrasonic (no dry ice required) |
| Saída continua | Si |
8. Garantía e soporte
Information regarding warranty coverage and customer support for the BeamZ LF1500 is typically provided with your purchase documentation or can be found on the official BeamZ websitio. Garde o comprobante de compra para calquera reclamación de garantía.
For technical assistance, spare parts, or service inquiries, please contact your local BeamZ distributor or visit the official BeamZ websitio para información de contacto.
Tenda oficial da marca: BeamZ Amazon Store
9. Recursos multimedia
Below are relevant media resources for the BeamZ LF1500.
Imaxes do produto
The BeamZ LF1500 Professional Heavy Fog Machine, showcasing its compact design within a flight case and the flexible output hose for directing fog.
Vídeos oficiais de produtos
Non se atoparon vídeos oficiais de produtos do vendedor nos datos proporcionados.
