1. Introdución
Grazas pola compraasing the ET2 Soji 2-Light LED Linear Pendant. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
2. Información de seguridade
- Seguridade eléctrica: All electrical connections must be made in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Desconexión de alimentación: Desconecte sempre a alimentación no disxuntor principal ou na caixa de fusibles antes de comezar a instalación ou realizar calquera mantemento.
- Fixture Handling: Handle the fixture with care. Avoid dropping or striking the glass shades.
- Voltage: This fixture is designed for 120 Volts. Ensure your power supply matches this requirement.
- Só para uso en interiores: This product is intended for indoor use only. Do not install in wet or damp localizacións.
3. Contido do paquete
Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:
- ET2 Soji 2-Light LED Linear Pendant Fixture
- Manual de instrucións
- Hardware de montaxe
4. Configuración e instalación
Professional installation is recommended. Ensure power is disconnected before proceeding.
- Prepare a zona de instalación: Turn off power at the circuit breaker. Clear the area where the pendant will be installed.
- Montar o dosel: The pendant includes a canopy with a diameter of 39.5 x 4.75 x 1.75 inches. Secure the mounting hardware to the junction box in the ceiling. This fixture is adaptable for sloped ceilings.
- Conectar cableado: Follow the wiring diagrams provided in the included instruction manual. Connect the fixture's wires to the corresponding household wires (live, neutral, ground).
- Fixar o dispositivo de fixación á cuberta: Carefully lift the fixture and attach it to the mounted canopy, ensuring all connections are secure.
- Instalar pantallas de vidro: Gently attach the satin white glass shades to the fixture.
5. Instrucións de funcionamento
Once installed and power is restored, the ET2 Soji LED Linear Pendant can be controlled via an app or a remote control, depending on your setup. Refer to the specific instructions provided with your smart control system for pairing and operation details.
- Encendido/apagado: Use the connected wall switch, remote control, or smart app to turn the light fixture on or off.
- Axuste de brillo: If connected to a compatible dimmer system, adjust brightness using the remote control or app.
6. Mantemento
Un mantemento regular garante a lonxevidade e o rendemento óptimo da súa lámpada colgante.
- Limpeza: Disconnect power before cleaning. Use a soft, dry cloth to wipe the metal frame and glass shades. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- LED: The integrated LED light source has a rated life of 30,000 hours and is not user-replaceable.
7 Solución de problemas
Se a súa lámpada colgante non funciona correctamente, consulte os seguintes problemas e solucións comúns:
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non se acende | Sen fonte de alimentación | Comprobe o disxuntor ou o fusible. Asegúrese de que o interruptor de parede estea acendido. |
| Luz parpadea | Conexión de cableado solta | Turn off power and check all wiring connections. Consult an electrician if unsure. |
| Remote control/App not working | Not paired or battery issue | Refer to your smart control system's manual for pairing instructions. Check remote control batteries. |
8. Especificacións
| Característica | Detalle |
|---|---|
| Marca | ET2 |
| Número de modelo | E25068-92BKGLD |
| Dimensións do produto | 39.5 cm de longo x 6 cm de ancho x 6 cm de alto |
| Cor | Black/Gold (Finish), Satin White (Shade) |
| Material | Metal, Vidro |
| Tipo de fonte de luz | LED |
| Número de fontes de luz | 2 |
| Wattage | 17 vatios (total) |
| Voltage | 120 voltios |
| Brillo | 1890 lúmenes |
| Eficiencia | 70 lúmenes por vatio |
| Temperatura da cor da luz | 3000 Kelvin |
| Vida clasificada | 30,000 horas |
| Tipo de instalación | Montaxe semi empotrado |
| Método de control | App / Remote Control |
| Uso interior/exterior | Interior |
| Peso do elemento | 13.5 libras |
9. Garantía e soporte
The ET2 Soji 2-Light LED Linear Pendant comes with a Garantía limitada do fabricante de 2 anos. Esta garantía cobre os defectos nos materiais e na fabricación no uso normal.
For warranty claims or technical support, please contact ET2 customer service. Keep your proof of purchase for warranty validation.
