Manual de instrucións do soporte de parede para un só monitor ONKRON G120-BLK
Model: G120-BLK
Introdución
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ONKRON G120-BLK Single Monitor Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.
Image: The ONKRON G120-BLK Single Monitor Wall Mount, a black articulating arm designed for wall mounting.
Información de seguridade
WARNING: Improper installation or use of this product may result in serious injury or damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer or ONKRON customer support.
- Ensure the mounting surface can safely support the combined weight of the mount and your monitor.
- Non exceda a capacidade de peso máxima de 17.6 lb (8 kg).
- This mount is designed for monitors between 13 and 34 inches.
- Always use the provided hardware. If any parts are missing or defective, contact ONKRON for replacement.
- Exercise caution when handling the gas spring mechanism. The spring is under tension and can cause injury if not handled correctly. Do not remove plastic covers over the main poles as they are for protection.
- Manteña os nenos e as mascotas afastados durante a instalación.
Contido do paquete
Verifique que estean presentes todos os compoñentes antes de comezar a instalación.
Image: All components included in the ONKRON G120-BLK package, including the mount, various screws, washers, wall anchors, and an Allen key.
- Monitor Wall Mount Assembly
- Prato VESA
- Placa de parede
- Mounting Hardware (screws, anchors, washers for various VESA sizes)
- Chave Allen (6 mm)
- Manual de instrucións
Configuración e instalación
Follow these steps carefully for a secure installation. It is recommended to have a second person assist during monitor attachment.
Video guía de instalación
Video: An official ONKRON instruction video demonstrating the installation process for the G120-B monitor mount.
Paso 1: Marcado de buratos
- Determine the desired mounting location on your wall. Ensure it is a solid surface (e.g., wood stud, concrete) capable of supporting the weight.
- Hold the wall plate against the wall at the desired height and use a pencil to mark the drill hole locations.
Image: The ONKRON G120-BLK monitor mount securely installed on a brick wall, demonstrating a typical mounting scenario.
Paso 2: Instalación do soporte
- Drill pilot holes at the marked locations. The drill bit size will depend on your wall material and the anchors used.
- Fixa a placa de parede á parede cos parafusos e ancoraxes axeitados. Asegúrate de que estea firmemente fixada e nivelada.
Step 3: Attaching the Monitor to the Mount
- Attach the VESA plate to the back of your monitor using the correct screws (M4 or M6) that fit your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor and slide the VESA plate onto the arm's mounting head. Ensure it clicks into place or is secured with the provided locking mechanism.
Image: Diagram illustrating VESA 75x75mm and 100x100mm mounting patterns, compatible screen diagonal (13"-34"), and load capacity (2.2-17.6 lbs).
Step 4: Adjusting for Monitor Weight (Gas Spring Tension)
The gas spring tension must be adjusted after the monitor is attached to ensure it holds its position. If the monitor sags or springs up, adjust the tension.
- Locate the gas spring adjustment screw on the arm.
- Use the provided Allen key to turn the screw:
- Xire no sentido contrario ás agullas do reloxo for lighter screens (to reduce tension).
- Xire no sentido horario for heavier screens (to increase tension).
- Adjust gradually until the monitor stays in the desired vertical position when released.
Image: Close-up of the gas spring adjustment point on the monitor arm, showing the Allen key inserted and directional arrows for adjusting tension for lighter or heavier screens.
Operating the Monitor Mount
The ONKRON G120-BLK offers a range of adjustments for optimal viewcomodidade.
- Axuste de altura: The arm allows for 11 inches (28 cm) of vertical height adjustment. Gently push or pull the monitor to the desired height.
- Extensión/Retracción: The arm can extend from 3.5 inches (8.9 cm) to 13.7 inches (34.8 cm) from the wall.
- Inclinación: Axusta a inclinación do monitor de +90° a -45° para reducir o brillo e atopar a túa opción preferida viewángulo de ing.
- Xiratorio: Swivel the monitor 180° left or right.
- Rotación: Rotate the monitor 360° for landscape or portrait orientation.
Image: Four panels demonstrating the full motion capabilities of the mount: 180° swivel, 360° rotation, +90° to -45° tilt, and 11 inches of height adjustment.
Xestión de cables
Utilize the integrated cable management system to keep your workspace tidy.
- Route monitor cables through the channels on the underside of the arm.
- Secure the cables using the provided clips or covers to maintain a clean appearance.
Imaxe: Primeiro plano view of the monitor arm showing a cable neatly routed through the integrated cable management channel.
Mantemento
Un mantemento regular garante a lonxevidade e o rendemento óptimo do soporte do monitor.
- Limpeza: Limpa a montura cun pano suave eamp pano. Evite produtos de limpeza abrasivos ou solventes.
- Comprobacións periódicas: Comprobe periodicamente todos os parafusos e conexións para asegurarse de que permanecen ben axustados. Volva a apertalos se é necesario.
- Axuste do resorte de gas: If your monitor's weight changes or if the arm no longer holds its position, re-adjust the gas spring tension as described in the Setup section.
Resolución de problemas
Consulta esta sección para obter solucións a problemas comúns.
| Problema | Causa posible | Solución |
|---|---|---|
| O monitor afunde ou non se mantén á altura desexada. | A tensión do resorte de gas é demasiado baixa para o peso do monitor. | Increase gas spring tension by turning the adjustment screw clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Monitor springs up or is difficult to push down. | A tensión do resorte de gas é demasiado alta para o peso do monitor. | Decrease gas spring tension by turning the adjustment screw counter-clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| A montura parece inestable ou tambaleante. | Loose connections or improper wall installation. | Check all mounting screws on the wall plate and VESA plate. Ensure they are securely tightened. Verify the wall can support the mount and monitor. |
| Difficulty with monitor movement (tilt, swivel, rotation). | As articulacións están demasiado apertadas. | Some joints may have adjustable tension screws. Loosen slightly if movement is too stiff. Do not over-loosen. |
Especificacións
- Modelo: G120-BLK
- Compatibilidade do tamaño da pantalla: 13 - 34 polgadas
- Capacidade de peso: 2.2 - 17.6 libras (1 - 8 kg)
- Compatibilidade VESA: 75x75mm, 100x100mm
- Ángulo de inclinación: +90° a -45°
- Ángulo de giro: 180°
- Rotación: 360°
- Axuste de altura: 11 polgadas (28 cm)
- Extensión do brazo: De 8.9 cm (3.5 polgadas) a 34.8 cm (13.7 polgadas)
- Material: Aluminio
- Dimensións do produto: 16.34 x 2.28 x 6.61 polgadas (41.5 x 5.8 x 16.8 cm)
- Peso do artigo: 3.96 libras (1.8 kg)
Garantía e Soporte
ONKRON products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official ONKRON websitio.
If you encounter any issues or have questions regarding your ONKRON G120-BLK monitor mount, please contact ONKRON customer support for assistance. Our experts are available to help.
Información de contacto: Please refer to the ONKRON websitio web ou a embalaxe do produto para obter os datos de contacto máis actualizados.
