CQR Hold-up PA Double Push Panic Button User Manual

1. Introdución

Este manual ofrece instrucións completas para a instalación, o funcionamento e o mantemento do CQR Hold-up PA Double Push Panic Button. This device is designed to provide a reliable and immediate alert in emergency situations, integrating seamlessly with compatible alarm control panels. It features a double-press activation mechanism and a key-reset function to prevent accidental activation and ensure secure operation.

Lea este manual detidamente antes da instalación e o uso para garantir o seu correcto funcionamento e seguridade.

2. Información de seguridade

• Seguridade eléctrica: Installation should only be performed by qualified personnel in accordance with all local and national electrical codes. Ensure power to the alarm control panel is disconnected before wiring.
• Montaxe: Mount the device securely on a stable surface to prevent accidental dislodgement.
• Ambiente: Do not expose the device to extreme temperatures, humidity, or direct water. It is designed for indoor use only.
• Mantemento: Non intente abrir nin reparar o dispositivo vostede mesmo. Encargue calquera mantemento a persoal de servizo cualificado.
• Proba: Regularly test the panic button's functionality in conjunction with your alarm system to ensure it is operating correctly.

3. Contido do paquete

Verifique que todos os elementos que se indican a continuación estean presentes no seu paquete:

• CQR Hold-up PA Double Push Panic Button Unit
• Key for Reset Function
• Mounting Screws (may vary)
• Este Manual de Usuario

4. Configuración e instalación

The CQR Hold-up PA Double Push Panic Button is designed for surface mounting and integration with a compatible alarm control panel.

4.1. Lugar de montaxe

Choose a discreet yet easily accessible location for mounting, such as under a counter, desk, or near a point of sale. Ensure the surface is clean, dry, and structurally sound.

4.2. Wiring to Alarm Control Panel

1. Desconectar a enerxía: Before beginning any wiring, ensure the alarm control panel is completely powered off and disconnected from its main power source and backup battery.
2. Access Wiring Terminals: Abre o casing of the panic button (if applicable) to expose the wiring terminals. Refer to your alarm control panel's manual for specific zone input terminals for panic devices.
3. Conecte cables: Connect the panic button's output wires to the designated panic zone input terminals on your alarm control panel. This device typically operates as a Normally Closed (NC) contact, opening upon activation. Consult the wiring diagram provided with your alarm control panel for correct polarity and connection points.
4. Cableado seguro: Asegúrate de que todas as conexións dos cables estean seguras e debidamente illadas.
5. Pechar Casing: Carefully close the panic button casing.

4.3. Montaxe da Unidade

1. Marcar os buratos: Use the panic button unit as a template to mark the drilling locations for the mounting screws on your chosen surface.
2. Perforar buratos piloto: Drill pilot holes if necessary, appropriate for the mounting screws.
3. Dispositivo seguro: Align the panic button with the drilled holes and secure it firmly using the provided mounting screws. Do not overtighten.

4.4. Power On and Test

Once installation is complete, restore power to the alarm control panel. Perform a functional test of the panic button as described in the "Operating Instructions" section to ensure it triggers the alarm system correctly.

5. Instrucións de funcionamento

5.1. Activating the Panic Button

To activate the panic alarm, simultaneously press both red push buttons on the front of the unit. The double-press mechanism is designed to minimize accidental activations while ensuring quick response in an emergency.

Upon successful activation, the panic button will latch, and the alarm control panel will initiate the programmed panic response (e.g., siren activation, silent alarm, notification to monitoring station).

5.2. Resetting the Panic Button

After activation, the panic button will remain in a latched state until manually reset. To reset the device:

1. Insert the provided key into the keyhole located on the top surface of the panic button.
2. Turn the key clockwise (or counter-clockwise, depending on the specific mechanism) until the buttons release and return to their original position.
3. Remove the key. The panic button is now reset and ready for re-activation.

Importante: Always keep the reset key in a secure and accessible location known only to authorized personnel.

6. Mantemento

The CQR Hold-up PA Double Push Panic Button requires minimal maintenance to ensure reliable operation.

• Limpeza: Periodically wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
• Proba: It is recommended to test the panic button's functionality at least once a month to confirm its connection to the alarm system and proper activation/reset.
• Inspección: Visually inspect the unit for any signs of damage, loose wiring, or tampering.

7 Solución de problemas

If you encounter issues with your CQR Hold-up PA Double Push Panic Button, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact your alarm system installer or the manufacturer's technical support.

8. Especificacións

9. Garantía e soporte

Specific warranty information for the CQR Hold-up PA Double Push Panic Button is not provided within this manual. For details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or contact the retailer or manufacturer directly.

For technical support, installation assistance, or troubleshooting beyond the scope of this manual, please contact your alarm system installer or the manufacturer, Security Components LTD, through their official channels.

You can visit the CQR Store on Amazon for more information: CQR Store