1. Introdución
This manual provides essential information for the proper setup, operation, and maintenance of your Focal Chora 826 3-Way Bass Reflex Floorstanding Loudspeaker. Please read these instructions thoroughly before using your loudspeaker to ensure optimal performance and longevity.
The Focal Chora 826 is a high-fidelity 3-way floorstanding loudspeaker designed to deliver balanced and precise midranges, articulated bass, and a wide soundstage. It features Focal's exclusive Slatefiber cone technology and an aerodynamic front port for enhanced bass impact.
Figura 1: Fronte view of the Focal Chora 826 loudspeaker without its protective grille, highlighting the drivers and bass port.
2. Instrucións de seguridade
To prevent damage and ensure safe operation, observe the following safety guidelines:
- Colocación: Position the loudspeaker on a stable, level surface to prevent tipping. Avoid placing it in direct sunlight, near heat sources, or in areas with high humidity.
- Ventilación: Ensure adequate air circulation around the loudspeaker. Do not block any ventilation openings.
- Potencia: Conecte o altofalante a un axeitado amplifier. Do not exceed the recommended power handling capacity (up to 250 Watts).
- Limpeza: Disconnect from power before cleaning. Use a soft, dry cloth. Avoid liquid cleaners or abrasive materials.
- Obxectos estranxeiros: Do not insert objects into any openings of the loudspeaker.
- Servizo: Do not attempt to service the loudspeaker yourself. Refer all servicing to qualified service personnel.
3. Desembalaxe e contido
Carefully remove the loudspeaker from its packaging. Retain all packaging materials for future transport or storage. The package should contain:
- Focal Chora 826 Floorstanding Loudspeaker (Model: FCHORA826LW-KL)
- Rejilla protectora
- Manual de instrucións (este documento)
Figura 2: Fronte view of the Focal Chora 826 loudspeaker with its protective grille in place.
4. Configuración
4.1 Colocación
Optimal placement is crucial for achieving the best sound quality from your Chora 826 loudspeakers. Consider the following:
- Acústica da sala: Experiment with placement to find the best balance between bass response and stereo imaging. Generally, placing speakers too close to walls can overemphasize bass, while placing them too far can reduce bass impact.
- Distancia: Maintain an equilateral triangle between the two loudspeakers and the primary listening position for optimal stereo imaging.
- Tilted Stand: The Chora 826 features a tilted stand designed for Time Alignment, which helps create a better soundstage by directing sound waves more precisely towards the listener. Ensure the speakers are positioned to take advantage of this design.
Figura 3: En ángulo view demonstrating the tilted design of the Chora 826 loudspeaker, which aids in soundstage optimización.
Figura 4: Lateral view of the Chora 826, illustrating its cabinet depth and the angle provided by the base.
4.2 Conexións
Connect your Chora 826 loudspeaker to your amplifier using high-quality speaker cables. Ensure correct polarity (+ to + and – to –) for each speaker to avoid phase issues that can negatively impact sound quality.
- Apague o seu amplifier antes de realizar calquera conexión.
- Strip approximately 1/2 inch (12 mm) of insulation from the ends of your speaker cables.
- Unscrew the binding posts on the back of the loudspeaker and your ampmáis vivo.
- Introduza o cable espido nos terminais correspondentes (vermello para positivo, negro para negativo).
- Tighten the binding posts securely to ensure a good connection.
Figure 5: Rear panel of the Chora 826, displaying the speaker cable binding posts for ampconexión de lifier.
4.3 Período de rodaxe
Your Focal Chora 826 loudspeakers require a break-in period to reach their full sonic potential. This typically involves 20 to 30 hours of playback at moderate volume. During this period, the drivers will loosen up, and the sound quality will improve, particularly in bass response and overall clarity.
5. En funcionamento
Once properly set up and connected, operating your Chora 826 loudspeakers is straightforward:
- Asegura o teu ampo lifier está acendido e configurado na fonte de entrada correcta.
- Comeza co amplifier volume at a low level and gradually increase it to your desired listening level.
- The Chora 826 is compatible with various audio sources, including smartphones, tablets, MP3 players, desktops, televisions, projectors, and laptops, when connected through a suitable amplifier ou receptor.
- For optimal sound, avoid excessively high volumes that cause audible distortion.
6. Mantemento
Proper care will help maintain the appearance and performance of your loudspeakers:
- Gabinete: Wipe the cabinet surfaces with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp pódese usar un pano, seguido inmediatamente dun pano seco. Evite produtos químicos agresivos ou produtos de limpeza abrasivos.
- Condutores: The Slatefiber cones are delicate. Do not touch them directly. If dust accumulates, use a soft brush or compressed air from a distance.
- Grellas: The magnetic grilles can be removed for cleaning. Gently brush them to remove dust.
7 Solución de problemas
If you encounter issues with your Chora 826 loudspeakers, consult the following table:
| Problema | Causa posible | Solución |
|---|---|---|
| No sound from one or both speakers | Loose or incorrect speaker cable connection; Amplifier off or incorrect input selected; Faulty cable. | Check all cable connections and polarity; Ensure amplifier is on and correct input is selected; Test with different cables if available. |
| Son distorsionado ou pouco claro | Volume demasiado alto; Amplifier clipping; Incorrect speaker placement; Damaged driver. | Reduce volume; Check amplifier for signs of clipping; Adjust speaker placement; Contact support if driver damage is suspected. |
| Unbalanced sound (one speaker louder) | Incorrecto amplifier balance setting; Loose connection; Speaker placement. | Comproba amplifier balance control; Verify speaker cable connections; Ensure symmetrical speaker placement. |
8. Especificacións
Detailed technical specifications for the Focal Chora 826 Floorstanding Loudspeaker:
| Característica | Especificación |
|---|---|
| Nome do modelo | FCHORA826LW |
| Tipo de altofalante | Floorstanding, 3-Way Bass Reflex |
| Material | Madeira |
| Cor | Madeira clara |
| Dimensións do produto (P x A x A) | 45.25" x 19.25" x 13.5" (114.9 cm x 48.9 cm x 34.3 cm) |
| Peso do elemento | 47 libras (21.3 kg) |
| Tamaño do altofalante | 6.5 polgadas (diámetro do woofer) |
| Diámetro do woofer | 6.5 polgadas |
| Tipo de controlador de audio | Dynamic Driver (with Slatefiber cone) |
| Potencia de saída máxima do altofalante | 250 vatios |
| Tecnoloxía de conectividade | Con cable |
| Modo de saída de audio | Estéreo |
| Configuración da canle de son envolvente | 3.0 |
| Tipo de montaxe | Montaxe no piso |
| Característica especial | Stereo pairing; Magnetic grille |
| Dispositivos compatibles | Teléfono intelixente, tableta, reprodutor de MP3, ordenador de sobremesa, televisión, proxector, portátil |
| Uso interior/exterior | Interior |
| Compoñentes incluídos | FCHORA826LW-KL |
9. Garantía e soporte
Your Focal Chora 826 loudspeaker comes with a Limited Warranty. Please refer to the warranty documentation provided with your purchase for specific terms and conditions regarding coverage and duration.
For technical support, service, or warranty claims, please contact your authorized Focal dealer or visit the official Focal websitio para información de contacto.
