1. Introdución
This manual provides detailed instructions for the safe and effective installation, operation, and maintenance of your Onforu 48W LED RGB Wall Washer Light, Model CTB24RGB. Please read this manual thoroughly before use and retain it for future reference.
Image 1.1: Two Onforu 48W LED RGB Wall Washer Lights with remote controls.
2. Instrucións de seguridade
- Asegúrese de que a fonte de alimentación voltage coincide cos requisitos do produto (120 V).
- Do not disassemble, modify, or repair the product yourself. Contact qualified personnel for service.
- Manter o produto lonxe de materiais inflamables.
- The power plug is not waterproof. Ensure it is protected from water exposure, especially during outdoor use.
- Evite a exposición directa dos ollos á fonte de luz.
- Desconecte sempre a alimentación antes da instalación, limpeza ou mantemento.
3. Contido do paquete
Verifique que todos os compoñentes estean presentes e estean intactos ao abrir o envase:
- Onforu 48W LED RGB Wall Washer Light (x2)
- 44-Key RF Remote Control (x2)
- Soportes de montaxe (x4)
- M5 Hex Screw Key (x1)
- Parafusos (x4)
- Plastic Expansion Nails (x9)
- Screws for Mounting (x9)
Imaxe 3.1: Dimensións do produto e accesorios incluídos.
4. Especificacións
| Característica | Especificación |
|---|---|
| Número de modelo | CTB24RGB |
| Poder | 48 vatios |
| Voltage | 120 voltios |
| Brillo | 7200 lúmenes |
| Tipo de fonte de luz | LED |
| Cor | RGB (Color Changing) |
| Material | Aluminum, Tempered Glass |
| Tipo de acabado | Revestido en po |
| Clasificación IP | IP66 (Light Bar) |
| Dimensións do produto | 15.74 cm de longo x 2.48 cm de ancho x 3.14 cm de alto |
| Peso do elemento | 2 libras |
| Lonxitude do cable de alimentación | 3.93 metros |
| Rango de control remoto | Ata 26.25 pés (8 metros) |
| Vida Media | 30,000 horas |
5. Instalación
5.1 Montaxe da barra de luces
- Attach the mounting brackets to the light bar using the provided screws. The brackets allow for 180-degree adjustment.
- Choose a suitable location for installation (ceiling, wall, or ground). Ensure the surface can support the weight of the light.
- Mark the drilling points on the chosen surface using the bracket holes as a guide.
- Drill holes at the marked points. For masonry or concrete, insert the plastic expansion nails.
- Secure the light bar with the attached brackets to the surface using the mounting screws.
- Adjust the angle of the light bar as desired.
5.2 Conexión eléctrica
- Ensure the power outlet is easily accessible and protected from moisture, especially for outdoor installations.
- Conecte o cable de alimentación a unha toma de corrente estándar de 120 V CA.
- The light bar is IP66 waterproof, but the power plug is not. Protect the plug and connection point from water.
6. Instrucións de funcionamento
6.1 Remote Control Functions (44-Key RF Remote)
The light bar is controlled by the included 44-key RF remote control. The remote has a sensing distance of up to 26.25 feet (8 meters).
Image 6.1: Remote control operation and timer function.
6.2 modos de cor
The light offers 20 basic colors and 6 lighting modes:
- 20 Basic Colors: Select directly from the color buttons on the remote.
- 6 modos de iluminación: Includes Fade, Jump, Flash, and other dynamic effects. Refer to the remote control for specific mode buttons.
Imaxe 6.2: Ex.amples of 20 colors and 6 modes.
6.3 DIY Color Settings
The remote control features three DIY settings (DIY1, DIY2, DIY3) allowing you to customize colors by adjusting the proportion of red, green, and blue. Follow these steps:
- Press one of the DIY buttons (DIY1, DIY2, or DIY3) to enter DIY mode.
- Use the Red, Green, and Blue arrow buttons (up/down) to increase or decrease the intensity of each primary color.
- Once satisfied with your custom color, press the same DIY button again to save it.
- You can recall your saved DIY colors by pressing the corresponding DIY button.
Image 6.3: DIY color setting functionality.
6.4 Función de temporización
The timing function allows you to set the light to automatically turn off after a specified duration:
- Press the 3H, 6H, or 12H button on the remote to activate the timer for 3, 6, or 12 hours, respectively.
- The light will automatically turn off once the set time has elapsed.
6.5 Función de memoria
The light bar retains its last used settings (color, mode, and brightness) when powered off and on again. No need to reset your preferred configuration.
7. Mantemento
- Limpeza: Desconecte a corrente antes de limpar. Use un pano suave eamp cloth to wipe the surface of the light bar. Do not use abrasive cleaners or solvents.
- Inspección: Periodically check the power cord for any damage. Ensure all mounting screws are tight.
- Almacenamento: If storing the light for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.
8 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non se acende | No power supply; Loose connection; Faulty outlet. | Check power connection; Ensure outlet is functional; Try a different outlet. |
| O control remoto non funciona | Remote battery depleted; Obstruction between remote and light; Remote too far. | Replace remote battery; Remove obstructions; Operate within 26.25 ft range. |
| Colors or modes not changing | Remote control issue; Light malfunction. | Ensure remote is pointed at the light's sensor; Try resetting the light by unplugging and replugging. If issue persists, contact support. |
| DIY colors not saving | DIY button not pressed again to save. | After adjusting RGB values, press the same DIY button (DIY1, DIY2, or DIY3) again to save the custom color. |
9. Garantía e soporte
Onforu products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Onforu websitio. Garde o recibo da compra como xustificante de compra para reclamacións de garantía.
