LEDVANCE 360DEG Wall Sensor Instruction Manual

1. Introdución

Thank you for choosing the LEDVANCE 360DEG Wall Sensor. This device is designed to provide efficient and automated lighting control for outdoor environments, enhancing both convenience and energy savings. This manual provides essential information for the safe installation, operation, and maintenance of your sensor.

2. Información de seguridade

Lea atentamente estas instrucións de seguridade antes da instalación e o funcionamento. O incumprimento destas instrucións pode provocar descargas eléctricas, incendios ou outros perigos.

• Instalación profesional: Installation must be carried out by a qualified electrician in accordance with all local and national electrical codes.
• Desconexión de alimentación: Always disconnect power at the circuit breaker before installing, servicing, or cleaning the device.
• Voltage: Asegurar a subministración voltage matches the device's requirements (230 Volt AC).
• Condicións ambientais: The device has an IP55 protection rating, making it suitable for outdoor use and protected against dust and low-pressure water jets. However, avoid direct exposure to extreme weather conditions beyond its specified operating range (-20°C to +40°C).
• Modificación: Do not modify or alter the device in any way. Unauthorized modifications may void the warranty and create safety hazards.

3. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• 1x LEDVANCE 360DEG Wall Sensor device

4. Características do produto

• Stand-alone motion and light sensor for wall mounting.
• 360° detection field for comprehensive coverage.
• Optimized for energy saving.
• Three selectable operating modes: continuous light on, activation by motion, or activation by twilight.
• Zero-crossing circuit optimized for the operation of LED luminaires.
• IP55 protection type, suitable for outdoor use.
• Designed to be disassembled for separate control of internal light sources (if applicable).

5. Configuración e instalación

The LEDVANCE 360DEG Wall Sensor is designed for wall mounting. Refer to the following diagrams and instructions for proper installation.

Figura 5.1: Dimensions of the LEDVANCE 360DEG Wall Sensor. The sensor measures 7.6 cm in width, 9.5 cm in depth, and 11.1 cm in height.

Figura 5.2: Primeiro plano view of the LEDVANCE 360DEG Wall Sensor unit, showing its black polycarbonate housing and the spherical detection lens at the bottom.

5.1 Localización de montaxe

• Choose a wall location that provides the desired detection coverage. The sensor has a 360° detection field and a maximum detection distance of 10 meters.
• Avoid mounting near heat sources, air conditioning vents, or areas with direct sunlight, as these can interfere with sensor performance.
• Ensure the mounting surface is stable and can support the device's weight (250 grams).

5.2 Conexión eléctrica

• AVISO: Desconecte a alimentación antes de realizar calquera conexión eléctrica.
• Connect the sensor to a 230 Volt AC power supply.
• Follow the wiring diagram provided with the product packaging for correct connections. Ensure all connections are secure and insulated.
• The zero-crossing circuit is optimized for LED luminaires.

6. Instrucións de funcionamento

The LEDVANCE 360DEG Wall Sensor offers flexible operation modes and adjustable settings.

6.1 Modos de funcionamento

The sensor features three selectable operating modes:

1. Continuous Light On: The connected light remains continuously on, bypassing sensor detection.
2. Activation by Motion: The connected light turns on when motion is detected within the 360° field.
3. Activation by Twilight: The connected light turns on when ambient light levels fall below a set threshold (twilight) and motion is detected.

Refer to the product's internal settings or external switches (if present) to select the desired mode. Note that some settings may require opening the device, which should only be done by a qualified professional.

6.2 Detection Settings

The sensor allows for adjustment of the light duration after detection:

• Duración da luz: The duration for which the light remains on after motion detection can typically be set between 2 seconds and 15 minutes. Adjust this setting according to your preference and energy-saving goals.

7. Mantemento

The LEDVANCE 360DEG Wall Sensor requires minimal maintenance.

• Limpeza: Limpe periodicamente a lente e a carcasa do sensor cun pano suave eamp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
• Inspección: Regularly inspect the device for any signs of damage or wear. If any damage is found, disconnect power and contact a qualified electrician for repair or replacement.

8 Solución de problemas

If you experience issues with your LEDVANCE 360DEG Wall Sensor, refer to the following common problems and solutions:

• A luz non se acende:
  • Comprobe se a fonte de alimentación está conectada e activa.
  • Verify the operating mode is set correctly (e.g., 'Activation by Motion' or 'Activation by Twilight').
  • Ensure the detection area is clear of obstructions.
  • Adjust the sensitivity settings if available.
• A luz permanece acesa continuamente:
  • Check if the operating mode is set to 'Continuous Light On'.
  • Ensure no constant motion is occurring within the detection zone.
• Light turns on unexpectedly:
  • Check for environmental factors like moving branches, small animals, or sudden temperature changes that might trigger the sensor.
  • Adjust the sensor's sensitivity or detection range if possible.

Se o problema persiste despois de intentar estas solucións, póñase en contacto co servizo de atención ao cliente ou cun electricista cualificado.

9. Especificacións

10. Garantía e soporte

The LEDVANCE 360DEG Wall Sensor comes with a 3 anos de garantía do fabricante desde a data de compra, cubrindo defectos de materiais e fabricación en condicións de uso normal.

For technical support, warranty claims, or further assistance, please visit the official LEDVANCE store or contact their customer service department. You can find more information and contact details on the Tenda da marca LEDVANCE.

Conserve o comprobante de compra para efectos da garantía.