1. Instrucións de seguridade
Read all instructions carefully before attempting to install this fixture. Failure to follow these instructions may result in electrical shock, fire, or other hazards.
- Todo o cableado debe ser realizado por un electricista cualificado.
- Desconecte a alimentación antes de instalar ou reparar. Este dispositivo debe conectarse de acordo co Código Eléctrico Nacional e os códigos e ordenanzas locais aplicables.
- Requírese unha conexión a terra adecuada para a seguridade.
Precaución: Risco de incendio
- Ensure power is DESACTIVADO before installing or maintaining the fixture. No user-serviceable parts inside.
- Instale o kit empotrable e o accesorio segundo os códigos locais.
- Do NON handle energized fixture when hands are wet, when standing in wet or damp superficies ou auga.
- Do NON mount near flammable materials or any heat source.
- Do NON let power cords touch hot surfaces.
- Fixture is for indoor and dry location only.
2. Produto rematadoview
The LEDONE 2x4 FT Surface Mount Frame Kit is designed to provide a secure and aesthetically pleasing surface mounting solution for 2x4 foot LED flat panels (edge-lit and back-lit) or troffer lights. This kit allows for installation on ceilings or walls where recessed mounting is not feasible.
Image 2.1: The LEDONE 2x4 FT Surface Mount Frame Kit components.
The frame is constructed from high-quality aluminum with a white coating, offering corrosion and oxidation resistance for durability in commercial or residential environments. The assembled dimensions are approximately 48.11 x 24.31 x 2.56 inches.
Image 2.2: Detailed dimensions of the 2x4 surface mount frame kit.
3. Instrucións de instalación
This section outlines the steps for installing the LEDONE 2x4 FT Surface Mount Frame Kit. Ensure all safety precautions are followed before beginning installation.
Ferramentas necesarias (non incluídas):
- Broca
- Desaparafusador
- Cinta métrica
- Lapis
Compoñentes incluídos:
- 4 Frame pieces
- Fasteners and mounting screws
Image 3.1: Visual guide for installation steps 1 through 3.
- Montar o cadro: Assemble the four pieces of the frame together and connect them using the provided screws. Ensure the frame forms a rigid rectangle.
- Mount the Frame: Place the assembled frame onto the desired ceiling or wall surface. Mark the screw hole locations. Drill pilot holes if necessary, then secure the frame to the surface using the provided mounting screws. Ensure the frame is level and securely fastened.
- Prepare for Panel Insertion: Carefully dismantle one of the frame pieces (typically a short side) by removing its screws. This creates an opening to slide the LED panel fixture into the frame.
Image 3.2: Visual guide for installation step 4.
- Insert LED Panel and Re-attach Frame Piece: Slide the 2x4 LED panel light into the bracket through the opening created in Step 3. Once the panel is in place, re-attach the removed frame piece and secure it with screws.
The surface mount kit is suitable for LEDONE LOC-BLPL and LOC-TROF series panels, including 1x4, 2x2, and 2x4 sizes.
Imaxe 3.3: Ex.ample of installed LED panels using the surface mount frame kits.
4. Mantemento
The LEDONE Surface Mount Frame Kit requires minimal maintenance. Regular inspection and cleaning will help ensure its longevity and appearance.
- Limpeza: Use un suave, damp cloth to wipe down the frame. Avoid abrasive cleaners or solvents that could damage the white coating.
- Inspección: Periodically check all mounting screws to ensure they remain tight and secure. If any screws appear loose, tighten them carefully.
- Danos: If the frame becomes bent or damaged, it may compromise the secure mounting of the LED panel. Consider replacing damaged components.
5 Solución de problemas
Esta sección aborda problemas comúns que poden xurdir durante ou despois da instalación.
- Frame Not Square: If the assembled frame is not perfectly square, it may be due to uneven tightening of screws or slight manufacturing variations. Ensure all screws are tightened evenly. Minor adjustments can sometimes be made by gently flexing the frame before final tightening.
- Panel Does Not Fit: Verify that the LED panel is indeed a 2x4 foot (nominal) size and compatible with surface mount kits. Ensure that one side of the frame was fully removed as per installation step 3 to allow sufficient clearance for the panel to slide in.
- Hardware que falta: While the kit is designed to include fasteners and mounting screws, occasionally items may be missing. Contact LEDONE customer support for replacement hardware if necessary.
- Frame Appears Flimsy After Assembly: Ensure all screws connecting the frame pieces are securely tightened. The frame is designed to be rigid once fully assembled and mounted.
6. Especificacións
| Característica | Especificación |
|---|---|
| Número de modelo | 2X4 SMK (Troffer & Panel) |
| Dimensións do produto (L x W x H) | 48.11 x 24.31 x 2.56 polgadas (aprox.) |
| Material | Aluminio |
| Tipo de acabado | Branco |
| Tipo de montaxe | Superficie |
| Peso do elemento | 5 libras |
| Compatibilidade | 2x4 ft Flat Panels (Edge-lit and Back-lit), LEDONE LOC-BLPL and LOC-TROF series |
| Certificación | UL (for associated lighting fixtures, frame is a component) |
7. Garantía e soporte
LEDONE provides a 1-year limited warranty on this 2x4 inch surface mount kit. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or inquiries regarding missing components, please contact LEDONE customer service.
- Fabricante: LED One Corporation
- Teléfono: (844) LEDONE6
- Fax: 1-510-217-9461
- Websitio: www.ledoncorp.com
