BFT Gate Opener P125002 SB-BAT 24v DC Battery Backup Kit User Manual

1. Produto rematadoview

The BFT SB-BAT (P125002) is a 24v DC battery backup system designed to ensure continuous operation of your gate opener even during power outages. This kit provides a reliable power source, activating automatically when the main power supply is interrupted and recharging when power is restored.

It is compatible with various BFT gate opener models, including the Deimos BT series, VIRGO - LINX, EOS-SCE, HYDRA N, DEIMOS BT-QSC D-NETTUNO S, SB BAT/SB CARBAT (DEIMOS BT-SB 300), BT BAT 2 (URANO BT ARES 1000 & ARES 1500) NETTUNO B, VENERE D, ARGO, LIBRA C MA - LIBRA C LX.

BFT P125002 SB-BAT Battery Backup Kit components

Figure 1: Contents of the BFT P125002 SB-BAT Battery Backup Kit, including batteries, wiring, and mounting hardware.

2. Configuración e instalación

Installation of the BFT SB-BAT kit is designed to be straightforward. It integrates with your existing BFT gate opener system.

2.1. Precaucións de seguridade

Ensure the main power to the gate opener is disconnected before beginning installation.
Use equipos de protección individual (EPI) adecuados.
Refer to your specific gate opener's manual for compatibility and connection points.

2.2. Pasos da instalación

Desempaquetar compoñentes: Carefully remove all items from the packaging. Verify all components are present as shown in Figure 1.
Mount the Battery Housing: Securely mount the battery housing unit near your gate opener's control board, ensuring it is protected from environmental elements.
Conectar baterías: Insert the two 12V 1.2Ah batteries into the housing. Connect them according to the wiring diagram provided with the kit (typically in series to achieve 24V DC).
Connect to Gate Opener: Connect the battery backup system's wiring to the designated battery input terminals on your BFT gate opener's control board. Consult your gate opener's manual for precise terminal locations.
Cableado seguro: Ensure all wiring is neatly routed and secured to prevent accidental disconnections or damage.
Restaurar enerxía: Once all connections are secure and verified, restore main power to the gate opener. The smart charger board will begin charging the batteries.

Close-up of BFT P125002 SB-BAT components including batteries and wiring

Figura 2: Un peche view of the battery backup kit components, highlighting the batteries and connection wires.

3. Funcionamento

The BFT SB-BAT battery backup system operates automatically to provide uninterrupted gate functionality.

Funcionamento normal: When main power is available, the smart charger board continuously charges and maintains the batteries.
Poder Outage: No caso dunha alimentación outage, the system automatically switches to battery power, allowing the gate opener to continue functioning normally.
Restauración de enerxía: Once main power is restored, the system automatically switches back to main power and resumes charging the batteries.

4. Mantemento

Regular maintenance ensures the longevity and reliability of your battery backup system.

Inspección visual: Periodically inspect the batteries and wiring for any signs of damage, corrosion, or loose connections.
Limpeza: Keep the battery housing and terminals clean and free of dust or debris.
Comprobación do estado da batería: While the system has an intelligent charger, it is advisable to periodically test the battery backup by temporarily disconnecting main power to ensure the gate operates on battery power. Reconnect main power after testing.
Substitución da batería: Batteries have a finite lifespan. If you notice a significant decrease in backup operation time, it may be time to replace the batteries. Use only recommended replacement batteries (2x 12V 1.2Ah).

5 Solución de problemas

This section addresses common issues you might encounter with your BFT SB-BAT battery backup kit.

Problema	Causa posible	Solución
Gate does not operate during power outage.	As baterías non están cargadas. Conexións de cableado soltas ou incorrectas. Batteries are at end of life. Fusible fundido.	Ensure main power is connected and the charger board is functioning. Allow 12-14 hours for full charge. Check all wiring connections between the battery kit and the gate opener. Test batteries; replace if necessary. Check and replace the 20A fuse if blown.
Batteries do not seem to be charging.	Main power supply issue. Faulty charger board. Conexión da batería incorrecta.	Verify main power to the gate opener. Contact BFT support for charger board diagnosis. Recheck battery wiring according to the manual.

6. Especificacións

Key technical specifications for the BFT SB-BAT (P125002) battery backup system:

Modelo: P125002 SB-BAT
Sistema Voltage: 24V DC
Carga Voltage: 27.2 V
Corrente de carga: 130 mA
Capacidade da batería: 2x (12V 1.2Ah)
Exhausted Battery Protection Threshold: 20.4 V
Tempo de recarga da batería: 12-14 horas
Fusible: 20A
Fabricante: BFT

7. Garantía e soporte

For warranty information or technical support, please refer to the documentation included with your purchase or contact BFT customer service directly. Keep your proof of purchase for warranty claims.

You can find more information about BFT products on their official websitio o a través de distribuidores autorizados.

	BFT DEIMOS BT UL/CSA Electromechanical Gate Automation System Discover the BFT DEIMOS BT UL/CSA, an electromechanical automation system for rack sliding gates. Featuring smart technology, 24V safe operation, and simplified installation, this system enhances gate security and convenience. Explore its technical specifications and available accessories for residential and commercial applications.
	Manual de instalación da automatización de portas batentes BFT VIRGO Guía completa de instalación e usuario para o sistema de automatización de portas batentes BFT VIRGO, que abrangue a seguridade, as especificacións técnicas, os procedementos de instalación, a programación e o mantemento.
	Guía de instalación do sistema de radiocontrol BFT CLONIX1-2 e MITTO 2-4 de 433 MHz Guía de instalación completa para o receptor BFT CLONIX1-2 e os transmisores de radiocontrol MITTO 2-4 de 433 MHz, que abrangue a programación, a clonación, a seguridade e as especificacións técnicas para a automatización de portas e cancelas.
	Manuale di Installazione BFT THALIA: Quadro Comandi per Automazione Cancelli Esta guía detállasetagliata illustra l'installazione e la configurazione del quadro comandi BFT THALIA, progettato per l'automazione di cancelli e porte. Include specifiche tecniche, schemi di collegamento e istruzioni operative per garantire un funzionamento sicuro ed efficiente.
	Guía de referencia rápida UL do kit BFT Phobos BT Guía de referencia rápida para o sistema de apertura de portas automáticas BFT Phobos BT Kit UL, que abrangue a instalación, o cableado, a programación e a resolución de problemas.
	Instrucións de codificación do mando a distancia BFT MITTO 2B \| Mandos a distancia retro Guía paso a paso para codificar os mandos a distancia BFT MITTO 2B para abridores de portas, que abrangue os métodos existentes de pantalla LCD de mando a distancia e receptor. Inclúe consellos para a resolución de problemas.

BFT P125002 SB-BAT