1. Produto rematadoview
The Beghelli Emergency LED Lamp (Model BEG19500) is a high-quality emergency lighting solution designed to illuminate areas during power outages. This versatile lamp can be installed on walls, ceilings, or recessed, making it suitable for various environments. It features an 11W LED light source and is equipped with a long-lasting LiFe 3.2V 0.5 Ah battery, backed by a 5-year warranty.
Its robust design ensures functionality even in industrial settings, with an IP42 protection rating and IK05 impact resistance.
Figura 1: Fronte view of the Beghelli Emergency LED Lamp. O lamp features a white base and a transparent polycarbonate cover, revealing the LED light source inside.
2. Información de seguridade
Always read and understand all safety instructions before installing or operating the device. Failure to do so may result in injury or damage to the product.
- Asegúrese de desconectar a alimentación eléctrica antes de realizar calquera traballo de instalación ou mantemento.
- This product operates on 230V. Consult a qualified electrician if unsure about wiring.
- Non expoña o lamp to extreme temperatures or direct water spray beyond its IP42 rating.
- Do not attempt to open or modify the battery compartment or internal components, except as explicitly instructed.
- Dispose of batteries and electronic components according to local regulations. More information can be found on the manufacturer's website or local waste management authorities.
3. Instalación e configuración
The Beghelli Emergency LED Lamp offers flexible installation options:
- Preparación:
- Asegúrese de que a subministración eléctrica principal da zona de instalación estea desconectada no disxuntor.
- Desempaquetar o lamp and verify all components are present: the lamp unit and included battery.
- Opcións de montaxe:
O lamp can be mounted on a wall, ceiling, or recessed. The unit has 3 pre-breakage inputs (ø16) and can be installed on a standard 503 recessed box.
- Montaxe en parede/teito: Mark the desired mounting points using the lamp's base as a template. Drill holes and secure the lamp usando os parafusos axeitados (non incluídos).
- Montaxe empotrado: Prepare the recess opening according to the lamp's dimensions (L 280 x H 119 x P 46 mm). Ensure sufficient space for wiring.
- Cableado:
- Connect the 230V power supply wires to the lamp's terminals. Ensure correct polarity.
- O lamp is designed for simple connection. If replacing an older unit, existing wiring may be compatible.
- Instalación da batería:
The LiFe 3.2V 0.5 Ah battery is included and typically pre-installed or easily connected. Ensure it is securely connected before closing the lamp cuberta.
- Asemblea final:
Secure the transparent polycarbonate screen onto the lamp unit. Ensure it clicks into place for proper IP42 protection.
Figure 2: Photometric curve illustrating the light distribution pattern of the Beghelli Emergency LED Lamp. This diagram shows the intensity of light emitted at various angles.
4. Instrucións de funcionamento
The Beghelli Emergency LED Lamp operates automatically in emergency mode (SA/SE).
- Funcionamento normal: When main power (230V) is present, the lamp's battery charges. The LED light remains off.
- Operación de emerxencia: No caso dunha alimentación outage (blackout), the lamp automatically switches on, drawing power from its internal battery to provide emergency illumination.
- Duración da batería: O lamp provides 120 lumens for 1 hour or 80 lumens for 2 hours in emergency mode, depending on the configured setting. Refer to the installation instructions for details on adjusting this setting (if applicable, often involves cutting a wire or jumper as per customer reviews).
- Proba: Periodically test the emergency function by temporarily cutting the main power supply to the lamp's circuit. The lamp should illuminate immediately. Restore power after testing.
5. Mantemento
Regular maintenance ensures optimal performance and longevity of your emergency lamp.
- Limpeza: Clean the transparent polycarbonate screen periodically with a soft, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Comprobación da batería: The LiFe battery has a 5-year warranty. While designed for long life, it is recommended to perform a full discharge test annually to assess battery health. Allow the lamp to operate until the battery is depleted, then restore power to allow it to fully recharge.
- Inspección visual: Annually inspect the lamp for any signs of physical damage, loose connections, or discoloration.
- Substitución: Se o lamp fails to illuminate during a power outage or if the battery duration significantly decreases, the battery may need replacement. Contact a qualified technician for battery replacement.
6 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Lamp does not illuminate during power outage. |
|
|
| Lamp illuminates dimly or for a short duration. |
|
|
| Lamp permanece aceso constantemente. |
|
|
7. Especificacións
| Característica | Detalle |
|---|---|
| Marca | Beghelli |
| Número de modelo | BEG19500 |
| Fonte de alimentación | 230 V |
| Wattage | 11 W |
| Fluxo luminoso | 120 lumens (1 hour) / 80 lumens (2 hours) |
| Tipo de batería | LiFe 3.2V 0.5 Ah (Lithium Metal) |
| Batería incluída | Si |
| Tipo de instalación | Wall mount, Ceiling mount, Recessed |
| Dimensións (L x A x P) | 280 x 119 x 46 mm (11.02 x 4.69 x 1.81 polgadas) |
| Peso | 400 gramos (0.88 libras) |
| Cor | Branco |
| Material | Polycarbonate (Screen: Transparent Polycarbonate) |
| Grao de protección | IP42 |
| Resistencia ao impacto | IK05 |
| Modo de funcionamento | SA/SE (Emergency) |
8. Garantía e soporte
The Beghelli Emergency LED Lamp (Model BEG19500) comes with a 5 ano de garantía on its LiFe 3.2V 0.5 Ah battery, ensuring long-term reliability.
Para asistencia técnica, servizo ou reclamacións de garantía, póñase en contacto co servizo de atención ao cliente de Beghelli a través do seu servizo oficial website or authorized distributors. Keep your purchase receipt as proof of purchase.
For information on recycling and disposal of the product, especially the battery and LED components, please refer to local regulations and guidelines for electronic waste. More information can be found on the manufacturer's website or local waste management authorities.
