Manual do usuario do monitor de presión arterial automático Bios Simply Accurate Premium Plus BD315

Introdución

This fully automatic, digital blood pressure measuring device provides fast and reliable measurement of systolic and diastolic blood pressure as well as heart rate. Your blood pressure is an important parameter that can be used to monitor your health. This device enables you to monitor your blood pressure regularly and maintain a record of your blood pressure measurements.

The Bios Simply Accurate Premium Plus Automatic Blood Pressure Monitor is recommended by Hypertension Canada and licensed by Health Canada, having undergone clinical validation studies that meet or exceed Hypertension Canada's criteria.

1. Configuración

1.1 Desembalaxe e compoñentes

Desembala coidadosamente todos os artigos e asegúrate de que estean presentes os seguintes compoñentes:

• Unidade de monitor de presión arterial
• Wide range cuff (24-43 cm / 9.4"-17")
• Adaptador AC/DC
• Bolsa de almacenamento
• Manual de instrucións

Image 1: Bios Simply Accurate Premium Plus Automatic Blood Pressure Monitor with cuff.

1.2 Alimentación do dispositivo

The monitor can be powered using the included AC/DC adapter. Connect the adapter to the monitor and a power outlet. Alternatively, the device can be powered by batteries (not included). Open the battery compartment on the back of the unit and insert the required batteries, ensuring correct polarity.

Imaxe 2: Traseira view of the monitor, illustrating the battery compartment.

1.3 Cuff Preparation and Placement

A colocación correcta do manguito é fundamental para obter lecturas precisas. Siga estes pasos:

1. Lay the cuff flat on a table with the Velcro side down and the words facing up.
2. Ensure the end of the cuff is threaded through the metal D-ring to form a cylinder shape.
3. When placing the cuff on your arm, ensure the tube runs down your arm, not up towards your shoulder.
4. The elbow mark on the cuff should point down towards your elbow.
5. The red material on the cuff should be positioned over the brachial artery.
6. The bottom edge of the cuff should be approximately 2-3 cm (1 inch) above the elbow joint.
7. Pull the cuff snugly and tighten it using the Velcro fastener. You should be able to fit two fingers comfortably under the cuff.
8. Adjust the cuff so the tube runs down the inside of your arm.

2. Instrucións de funcionamento

2.1 Pre-Measurement Preparation

For accurate and consistent readings, prepare as follows:

• Rest quietly in a room at a comfortable temperature for at least 5 minutes before measuring.
• Ensure you are calm and not affected by mental stress, as this can influence blood pressure.
• Take measurements on bare skin.
• Sit with your legs uncrossed and your feet flat on the floor.
• Your back should be fully supported.
• Place your arm on a table with your palm facing upwards, ensuring the cuff is at the same level as your heart.

2.2 Tomar unha medida

Once the cuff is correctly placed and you are prepared:

1. Press the START button on the monitor.
2. While the measurement is being taken, do not speak and do not move. Try not to tense the muscles in your measuring arm.
3. Once the cuff deflates and a measurement is displayed on the monitor, you can remove the cuff.

2.3 Multiple Readings

If you are taking multiple readings, do not remove the cuff. Wait approximately 1 minute between subsequent readings. It is normal for blood pressure to fall as you take subsequent readings due to increased relaxation.

2.4 Timing Measurements

Blood pressure is most variable during the middle of the day. It is best to measure your blood pressure at the ends of the day:

• Morning Readings: Take first thing after getting out of bed, before coffee, tea, or breakfast, and after using the bathroom.
• Evening Readings: Wait at least two hours after dinner. If you have consumed coffee or alcohol, or have exercised, wait at least another 30 minutes.

Repeat this pattern for 7 days and average your systolic and diastolic readings to determine your average blood pressure.

2.5 Función de memoria

The monitor supports 2 users with 90 memories each, allowing you to track your readings over time.

3. Mantemento

To ensure the longevity and accuracy of your blood pressure monitor, follow these maintenance guidelines:

• Limpeza: Limpe o monitor e o manguito cun pano suave e seco. Non empregue produtos de limpeza abrasivos nin mergulle o dispositivo en auga.
• Almacenamento: Store the monitor and cuff in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Substitución da batería: Substitúa as pilas cando apareza o indicador de pila baixa na pantalla.

4 Solución de problemas

If you encounter issues with your blood pressure monitor, consider the following common solutions:

• Lecturas inexactas: Ensure the cuff is correctly placed, you are relaxed, and you have followed all pre-measurement preparation steps. Blood pressure variability is natural, so slight differences between readings are normal.
• Sen pantalla/alimentación: Check if the AC/DC adapter is properly connected or if the batteries need replacement.
• Mensaxes de erro: Refer to the comprehensive instructional manual for specific error codes and their corresponding troubleshooting steps.

Se os problemas persisten, póñase en contacto co servizo de atención ao cliente para obter asistencia.

5. Especificacións

6. Garantía

Warranty information for the Bios Simply Accurate Premium Plus Automatic Blood Pressure Monitor is typically included in the full product manual provided with your device. Please refer to that document for details regarding warranty coverage, terms, and conditions. For any questions, contact Bios customer support.

7. Apoio

For further assistance, product inquiries, or technical support, please visit the official Bios website or contact their customer service department. You can find more information and contact details by visiting the Tenda de bios en Amazon.