Yanzeo SR692

Manual de instrucións do lector YANZEO SR692 UHF RFID

Model: SR692 | Brand: Yanzeo

1. Introdución

This manual provides comprehensive instructions for the installation, operation, and maintenance of the YANZEO SR692 UHF RFID Reader. The SR692 is an integrated UHF RFID reader designed for long-range identification applications, featuring a 9dBi antenna and various network output options. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

2. Información de seguridade

3. Contido do paquete

Verifique que todos os elementos que se indican a continuación estean presentes no seu paquete:

YANZEO SR692 UHF RFID Reader with included accessories and dimensions

Figure 3.1: YANZEO SR692 UHF RFID Reader with its accessories and indicated dimensions (26cm x 26cm x 3.2cm). The image shows the main reader unit, power adapter, mounting hardware, and various cables including RS232/RS485 and RJ45 connectors.

4. Configuración e instalación

4.1 Instalación física

  1. Montaxe: Use the provided mounting bracket and hardware to securely attach the SR692 reader to a stable surface. Ensure the antenna side faces the desired reading area.
  2. Conexión de alimentación: Connect the power adapter to the reader's power input port and then plug it into a suitable power outlet.
  3. Conexión de rede (RJ45): For network communication, connect an Ethernet cable from the reader's RJ45 port to your network switch or router.
  4. Serial Connection (RS232/RS485): If using serial communication, connect the appropriate cable to the reader's serial port and your host device.
  5. Wiegand Connection: For Wiegand output, connect the Wiegand interface to your access control system.
Traseira view of YANZEO SR692 UHF RFID Reader showing cable connections

Figura 4.1: Traseira view of the YANZEO SR692 reader, illustrating the various cable connections including power, RJ45, and serial ports.

4.2 Configuración do software

After physical installation, the reader typically requires software configuration for optimal performance and integration with your system. This may involve setting IP addresses, communication parameters (baud rate for serial), and specific RFID tag reading modes. Refer to the accompanying software development kit (SDK) or configuration utility for detailed instructions on software setup.

5. Instrucións de funcionamento

5.1 Funcionamento básico

Once powered on and configured, the SR692 reader continuously emits a UHF radio frequency field. When an RFID tag compatible with the supported protocols (ISO18000-6C/EPC Gen2, ISO18000-6B) enters this field, the reader will detect the tag and read its unique identification data. This data is then transmitted via the configured interface (RJ45, RS232, RS485, or Wiegand) to the connected host system.

5.2 Reading Distance and Performance

The SR692 is designed for long-range reading, with an effective reading distance of up to 9 meters (approximately 30 feet) under ideal conditions. Factors affecting reading performance include:

Fronte view of YANZEO SR692 UHF RFID Reader

Figura 5.1: Fronte view of the YANZEO SR692 UHF RFID Reader, showing its robust casing and integrated antenna design.

6. Mantemento

7 Solución de problemas

ProblemaCausa posibleSolución
Reader not powering on.Sen fonte de alimentación; adaptador de corrente defectuoso; conexión solta.Check power outlet; ensure power adapter is securely connected; test with a known good power adapter if available.
Non se pode ler tags.Tag out of range; incorrect tag type; environmental interference; incorrect software configuration.Mover tag closer to the reader; ensure tags are UHF RFID; check for metal objects or other RF sources; verify software settings.
Problemas de conexión á rede.Incorrect IP address; faulty Ethernet cable; network configuration problem.Verify IP settings; check Ethernet cable; consult network administrator.
Incoherente tag le.Tag orientation; multiple tags in field; interference.Axustar tag orientation; manage tag density; reduce environmental interference.

8. Especificacións

9. Garantía e soporte

For warranty information and technical support, please contact your point of purchase or visit the official Yanzeo websitio. Garde o recibo da compra como xustificante de compra para reclamacións de garantía.

Yanzeo Store: https://www.amazon.com/stores/Yanzeo/page/47DF12D1-A192-426D-99DE-03F0F94ED170

Documentos relacionados - SR692

Preview Manual do usuario do lector RFID de ultra alta frecuencia Yanzeo
Manual de usuario do lector RFID de ultra alta frecuencia Yanzeo, que detalla os seus parámetros, aplicacións, cableado, instalación e funcionamento do software.
Preview YANZEO SR200 Portable UHF RFID Reader User Manual
User manual for the YANZEO SR200 Portable UHF RFID Reader, detailing its specifications, connection methods (USB and Bluetooth), and software operation for reading RFID tags. Includes device description, interface details, software download, and operational steps.
Preview Manual do usuario da máquina integrada Yanzeo SA Series UHF RFID
Manual de usuario completo para a máquina integrada de ultra alta frecuencia da serie SA de Yanzeo, que abrangue a instalación, o funcionamento, a configuración do software e os axustes avanzados para os lectores RFID.
Preview Yanzeo R781/R782-8DB Long Distance UHF Electronic Tag Manual de instrucións do lector
This instruction manual provides detailed information on the Yanzeo R781/R782-8DB Long Distance UHF Electronic Tag Reader, including its features, technical specifications, installation guide, operation modes, and configuration for various applications.
Preview YANZEO SU200 Portable UHF RFID Reader: User Manual and Specifications
This user manual provides comprehensive details on the YANZEO SU200 Portable UHF RFID Reader. It covers product characteristics, applications in logistics, parking, and inventory management, technical specifications, software download and setup for Windows and Android, and detailed operating instructions for both USB and Bluetooth connections. The manual includes steps for pairing, connecting, and reading RFID tags via the device's software interface.
Preview Guía de configuración de fábrica do lector RFID UHF Yanzeo (WG26/11)
Esta guía detalla a configuración de fábrica dos lectores RFID UHF de Yanzeo, centrándose especificamente no modo de saída WG26 e nas configuracións de desprazamento de bytes. Abarca modelos de lectores comúns como SR3308, SR681, SR691, SR791, SA810 e DM02 DR201, e proporciona instrucións para configurar os modos de saída, os desprazamentos de bytes e a resolución de problemas de conexión.