Manual de instrucións do aplique de parede para exteriores Maxax 2262/2W Dusk to Dawn

Introdución

Thank you for choosing the Maxax 2262/2W Dusk to Dawn Outdoor Wall Sconce. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

Image: Two Maxax 2262/2W outdoor wall sconces installed on a building exterior, showcasing their modern design and bubble glass.

Información importante de seguridade

AVISO: Risco de descarga eléctrica. Desconecte a alimentación na caixa de fusibles ou no disyuntor antes da instalación ou do mantemento.

• Todas as conexións eléctricas deben estar de acordo cos códigos e as ordenanzas locais ou co Código Eléctrico Nacional (NEC).
• Consulte a un electricista cualificado se non está seguro sobre o proceso de instalación.
• Use só conectores de cable homologados por UL/ETL.
• Non exceda a potencia recomendadatage for the bulb (Max 40W E26).
• Asegúrese de que o dispositivo estea correctamente conectado a terra.
• Use lentes e luvas de seguridade durante a instalación.

Contido do paquete

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer service for assistance.

• Outdoor Wall Sconce Fixture (2 units)
• Ferraxes de montaxe (parafusos, porcas para cables, placa de montaxe)
• Bubble Glass Shade
• Manual de instrucións

Nota: E26 bulb (Max 40W) is NON incluído e debe mercarse por separado.

Especificacións do produto

Image: Detailed dimensions of the Maxax 2262/2W wall sconce, indicating height, width, and depth.

Instrucións de instalación

Antes de comezar:

• Desconecte o interruptor automático ou a caixa de fusibles.
• Asegúrate de que a superficie de montaxe estea limpa, seca e estruturalmente sólida.
• Gather necessary tools: screwdriver, wire strippers, electrical tape, safety glasses, gloves.

Instalación paso a paso:

1. Preparar o cableado: Carefully pull the electrical wires from the outlet box.
2. Coloque a placa de montaxe: Secure the mounting plate to the outlet box using the provided screws. Ensure the plate is level and firmly attached.
3. Realizar conexións eléctricas:
   • Conecta o negro cable desde o aparello ata o negro (Live) wire from the outlet box using a wire nut.
   • Conecta o branco cable desde o aparello ata o branco (Neutral) wire from the outlet box using a wire nut.
   • Conecta o chan cable desde o aparello ata o chan wire from the outlet box (or to the green grounding screw on the mounting plate) using a wire nut.
   • Envolve todas as conexións dos cables con cinta illante para maior seguridade.
4. Fixación de montaxe: Carefully tuck all wires into the outlet box. Align the fixture with the mounting plate and secure it with the provided screws.
5. Instalar lámpada: Insert an E26 base bulb (Max 40W, not included) into the socket.
6. Fixar a pantalla de vidro: Secure the bubble glass shade to the fixture according to the design.
7. Restaurar enerxía: Volve a conectar o interruptor.

Image: Maxax wall sconce mounted on an exterior wall, demonstrating its placement suitability.

Instrucións de funcionamento

Función Dusk to Dawn:

This Maxax outdoor wall sconce is equipped with a built-in high-sensitivity photoelectric sensor, enabling automatic dusk-to-dawn operation.

• Activación automática: The light fixture will automatically turn on when the ambient light levels drop at dusk.
• Apagado automático: The light fixture will automatically turn off when sufficient natural light is detected at dawn.

Ensure the sensor is not obstructed by objects, eaves, or other light sources (like other bright lights) that could interfere with its proper function. For optimal performance, install the fixture in a location where the sensor can accurately detect natural light levels.

Image: Visual representation of the automatic dusk-to-dawn feature, showing the light off in daylight and on in darkness.

Mantemento

Regular maintenance will help preserve the appearance and functionality of your outdoor wall sconce.

• Limpeza: To clean the fixture, ensure the power is off. Wipe the exterior with a soft, damp pano. Non empregue produtos de limpeza abrasivos nin disolventes, xa que poden danar o acabado ou o vidro.
• Coidado do vidro: The bubble glass shade can be cleaned with a mild glass cleaner. Ensure it is completely dry before restoring power.
• Substitución da lámpada: Always turn off power before replacing the bulb. Allow the bulb to cool completely before touching. Replace with an E26 base bulb, not exceeding 40W.
• Inspección: Periodically check for any loose connections or signs of wear. If any damage is observed, consult a qualified electrician.

Image: Close-up of the bubble glass, showing its unique texture.

Resolución de problemas

If you encounter issues with your Maxax outdoor wall sconce, refer to the following common problems and solutions:

Garantía e Atención ao Cliente

Maxax products are designed for quality and durability. For warranty information or technical support, please refer to the product packaging or contact your retailer. Keep your purchase receipt as proof of purchase.

Para obter máis axuda, visite o Maxax Store on Amazon.