Introdución
This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your Yaheetech Dining Chairs. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.
Información de seguridade
- Ensure the chair is used appropriately, with a maximum weight capacity of 135 kg (297.6 Lb) per chair.
- Protect your floor with the plastic feet on the legs.
- Clean up spills promptly to maintain the chair's condition.
- Always follow the assembly instructions for safe installation.
- Non te pares na cadeira.
- Manteña os nenos lonxe da zona de reunión.
Características do produto
- Construción resistente: Built with a solid structure, supporting up to 135 kg (297.6 Lb).
- Comfortable seating: Features foam-padded seat and backrest for extended comfort.
- Materiais duradeiros: Made from high-quality Plywood, PVC, PP, and sponge material.
- Floor protection: Equipped with plastic feet on legs to prevent floor scratching.
- Superficie impermeable: The PU cushion surface is spill-friendly and easy to clean.
- Deseño elegante: Modern aesthetic suitable for various room types.


Contido do paquete
Your Yaheetech Dining Chairs package includes the following components for each chair:
- Respaldo da cadeira (1)
- Chair Seat (1)
- Front Legs (2)
- Rear Legs (2)
- Paquete de ferramentas (parafusos, arandelas, chave Allen)
- Manual de instrucións (1)
Note: The number of chairs and corresponding components will vary based on the set purchased (e.g., Set of 8).
Instrucións de montaxe
Assembly is required for these dining chairs. Please follow these steps carefully. It is recommended to assemble on a soft, clean surface to prevent damage.
- Desempaquetar compoñentes: Carefully remove all parts from the packaging. Verify that all components listed in the "Package Contents" section are present.
- Attach Front Legs: Align the front legs with the designated holes on the underside of the chair seat. Secure them using the provided bolts and washers. Do not fully tighten yet.
- Attach Rear Legs: Similarly, attach the rear legs to the chair seat. Ensure proper alignment before securing with bolts and washers. Do not fully tighten yet.
- Coloque o respaldo: Connect the chair backrest to the seat frame. Secure with the remaining bolts and washers.
- Leveling and Final Tightening: Place the assembled chair on a flat, level surface. Sit on the chair to allow the legs to settle into their natural position. While seated, gradually tighten all bolts using the Allen wrench until they are secure. This step is crucial for preventing wobbling.


Pautas de uso
These dining chairs are designed for indoor use in dining rooms, kitchens, and living room settings. Ensure the chair is placed on a stable, level surface before use. Avoid placing the chair in direct sunlight or near heat sources to prevent material degradation.


Mantemento e coidados
- Limpeza: Limpa co anuncioamp cloth. For spills, blot immediately with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the PU surface or wood finish.
- Inspección: Comprobe periodicamente todos os parafusos e conexións para asegurarse de que permanecen axustados. Volva a apertalos se é necesario para manter a estabilidade.
- Protección: Use coasters or placemats if placing hot items on the chair seat. Avoid dragging the chairs across the floor; lift them when moving to prevent damage to legs and floor.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A cadeira treme despois da montaxe. | Bolts not fully tightened or uneven leg length. | Ensure all bolts are securely tightened. Place the chair on a level surface and sit on it to distribute weight, then tighten all bolts while seated. If wobbling persists, check if any leg pads are missing or damaged. |
| Surface damage (scratches, peeling). | Sharp objects, excessive force, or harsh cleaning agents. | Avoid using sharp objects near the chair. Clean only with a soft, damp cloth and mild soap if necessary. Do not use abrasive cleaners. |
| Dificultade de montaxe. | Incorrect alignment of parts or missing hardware. | Refer to the "Assembly Instructions" section and ensure all parts are correctly oriented. Verify all hardware is present. Contact customer support if parts are missing. |
Especificacións
- Marca: Yaheetech
- Número de modelo: 364bbd97-8c7c-4093-a156-a3c4e24f4472
- Cor: Marrón escuro
- Material: Rubber Wood, PVC, PP & Sponge
- Dimensións do produto (P x A x A): 22.5" x 18" x 36.5"
- Profundidade do asento: 16.5 polgadas
- Total Item Weight (for the set of 8): 51.6 libras
- Capacidade máxima de peso: 135 kg (297.6 Lb) per chair
- Tipo de material do marco: Composite Board, Rubberwood
- Material do asento: Espuma
- Montaxe necesaria: Si
- Uso interior/exterior: Interior
- Instrucións de coidado do produto: Limpar

Garantía e Soporte
For warranty information or customer support, please refer to the documentation included with your purchase or visit the official Yaheetech website. You may also contact the seller directly for assistance with product-related inquiries.
Política de devolución: 30-day easy returns are typically offered by the seller. Please check your purchase details for specific return conditions.
Vendedor: Yaheetech (Vendedor profesionalfile)





