FIBARO Wall Plug UK USB/Z-Wave Plus Wireless Smart Socket

1. Introdución

This manual provides comprehensive instructions for the installation, operation, and maintenance of your FIBARO Wall Plug UK USB/Z-Wave Plus Wireless Smart Socket. This device is designed to offer intelligent control and energy monitoring for your electrical appliances, featuring an integrated USB charging port.

Image showing the FIBARO Wall Plug, a compact white smart socket with a UK Type G plug, featuring a blue LED ring and a side USB port. The product is displayed both out of its packaging and partially within its white retail box.

2. Información de seguridade

Please read and understand all safety warnings and instructions before installing and operating the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ensure the device is installed in a dry indoor location, away from direct sunlight, rain, or moisture.
• Do not exceed the maximum load capacity of 2500 Watts (1600 Watts recommended for continuous use).
• Non desmonte nin modifique o dispositivo. Encargue calquera mantemento a persoal cualificado.
• Manter fóra do alcance dos nenos.
• Desconecte a alimentación antes de realizar calquera mantemento ou limpeza.

3. Contido do paquete

Verifica que todos os compoñentes estean presentes no paquete:

• FIBARO Wall Plug (FGWPG-121 ZW5 UK + USB)
• Manual de usuario (este documento)

4. Configuración

4.1 Instalación física

1. Plug the FIBARO Wall Plug directly into a standard UK Type G wall socket.
2. Asegúrate de que estea ben asentado.

4.2 Inclusión da rede Z-Wave

To integrate the Wall Plug into your Z-Wave network:

1. Place the Z-Wave gateway (controller) in inclusion mode. Refer to your gateway's manual for specific instructions.
2. Plug the FIBARO Wall Plug into a power outlet.
3. Press the B-button (located on the device casing) three times quickly. The LED ring will indicate successful inclusion (e.g., a specific color or flash pattern).
4. The device should now appear in your Z-Wave controller's interface.

The Wall Plug is compatible with any certified Z-Wave gateway for basic on/off control, including systems like Wink, Samsung SmartThings, Nexin, Vera, URC, Zapata, and Home Seer.

4.3 Uso do porto USB

The integrated USB port (5V / 1A) on the side of the Wall Plug can be used to charge compatible devices such as smartphones and tablets. This port also supports power measurement.

5. En funcionamento

5.1 Control manual

The Wall Plug can be manually switched on or off by pressing the B-button on its casing. The LED ring will change color to indicate the power status and consumption.

5.2 Remote Control via Z-Wave

Once included in your Z-Wave network, you can control the Wall Plug remotely using your Z-Wave gateway's interface or associated mobile application. This allows you to switch connected appliances on or off from anywhere.

5.3 Monitorización de enerxía

The unique LED ring visually indicates the current power consumption of the connected appliance. The color of the LED ring changes based on the energy usage, providing an immediate visual cue. You can also monitor detailed power consumption data for both the main socket and the USB port independently through your Z-Wave mobile application.

6. Mantemento

6.1 Limpeza

To clean the device, ensure it is unplugged from the wall socket. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.

6.2 Actualizacións de firmware

Firmware updates for the FIBARO Wall Plug may be available periodically to improve performance or add new features. These updates typically require a FIBARO Home Center gateway for installation. Refer to the FIBARO support website or your Home Center's documentation for instructions on updating device firmware.

7 Solución de problemas

If you encounter issues with your FIBARO Wall Plug, consider the following:

• O dispositivo non responde: Ensure the Wall Plug is securely plugged into a live power outlet. Check if the connected appliance is functioning correctly.
• Cannot include in Z-Wave network: Ensure your Z-Wave gateway is in inclusion mode and the Wall Plug is within range. Try moving the Wall Plug closer to the gateway. Perform a factory reset on the Wall Plug (refer to FIBARO documentation for reset procedure) and attempt inclusion again.
• LED ring not illuminating or showing incorrect color: Verify the device is powered. If the issue persists, contact support.
• Appliance unexpectedly turns off: The Wall Plug has an overload protection feature. If the connected appliance exceeds the maximum wattage (1600W continuous, 2500W peak), the plug may automatically shut off to prevent damage. Reduce the load or use a different outlet for high-power appliances.

For more detailed troubleshooting or advanced configurations, please visit the official FIBARO support website or consult the comprehensive online manuals.

8. Especificacións

9. Garantía e soporte

For warranty information and technical support, please refer to the official FIBARO website or contact their customer service. You can also find additional resources and FAQs on the product's Amazon page: FIBARO Wall Plug on Amazon.de.

The FIBARO brand store can be visited at: FIBARO Store.