Introdución
The Monkey Loop Floor Prime 3 Guitar Stand is designed to securely hold up to three acoustic, electric, or bass guitars. Constructed from durable alloy steel with protective rubber padding, this stand offers a compact and stable solution for organizing your instruments in a studio, on stage, or at home. Its foldable design allows for easy transport and storage.
Información de seguridade
- Ensure all components are securely fastened before placing instruments on the stand.
- Coloque o soporte sobre unha superficie plana e estable para evitar que se volque.
- Do not exceed the capacity of three guitars.
- Keep the stand away from high-traffic areas to avoid accidental bumps.
- Regularly inspect the stand for any signs of wear or damage to the frame or padding.
Contido do paquete
Before assembly, verify that all parts are present:
- Main frame components (vertical supports, base bars, top support bar)
- Protective rubber padding/sleeves
- Assembly hardware (screws, Allen key) - Note: Some screws may be pre-inserted into the tubular components.
- Pés de goma
Instrucións de montaxe
A montaxe adoita levar uns 15 minutos. Siga estes pasos atentamente:
- Desempaquetar compoñentes: Carefully remove all parts from the packaging. Check inside the tubular sections for any pre-inserted screws or small parts.
- Montar a base: Connect the base bars to the vertical support frames. Ensure the rubber padding is correctly oriented to protect the instrument bodies.
- Fixar soportes verticais: Secure the vertical support frames to the assembled base.
- Install Top Support Bar: Attach the top support bar, which features the neck cradles, to the upper section of the vertical supports. Ensure the cradles are facing the correct direction to hold guitar necks.
- Asegurar todos os elementos de fixación: Hand-tighten all screws initially. Once all components are in place, gently tighten them with the provided Allen key. Avoid over-tightening.
- Comprobar a estabilidade: After initial tightening, place the stand on a flat surface. If it wobbles, slightly loosen all screws, allow the stand to settle so all feet are in contact with the ground, then re-tighten the screws. This ensures proper alignment and stability.
- Colocar os pés de goma: Ensure all rubber feet are securely attached to the bottom of the stand for enhanced stability and floor protection.
Image: Components of the Monkey Loop Floor Prime 3 Guitar Stand, showing its foldable structure for transport or initial assembly.
Image: Close-up of the stand's base, highlighting the protective rubber padding and stable feet.
Image: Detail of the top support bar, showing the individual cradles designed to hold guitar necks securely.
Instrucións de funcionamento
Once assembled and stable, the stand is ready for use:
- Colocación: Position the stand in a safe location, away from obstacles and foot traffic.
- Loading Guitars: Gently place the body of each guitar onto the padded base of the stand. Ensure the bottom of the guitar rests fully on the padding.
- Securing Necks: Guide the neck of each guitar into one of the top cradles. The cradles are designed to hold the neck securely without damaging the finish.
- Saldo: For optimal stability, distribute the weight of the guitars evenly if possible, especially if not all three slots are used.
- Unloading Guitars: Lift the guitar neck out of its cradle first, then carefully lift the guitar body off the padded base.
Image: The Monkey Loop Floor Prime 3 Guitar Stand holding three guitars (electric and acoustic), demonstrating proper instrument placement.
Coidados e Mantemento
- Limpeza: Wipe the stand with a soft, dry cloth to remove dust. For stubborn dirt, a slightly damp pódese usar un pano e secar inmediatamente despois. Evitar produtos de limpeza ou solventes abrasivos.
- Padding Inspection: Periodically check the rubber padding on the base and neck cradles for any signs of wear, tears, or deterioration. Damaged padding should be replaced to prevent instrument damage.
- Comprobación de fixación: Every few months, inspect all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain structural integrity.
- Almacenamento: When not in use for extended periods, the stand can be folded for compact storage. Store in a dry environment.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Stand wobbles or is unstable | Uneven assembly; loose fasteners; uneven floor surface. |
|
| Guitars do not sit securely | Incorrect placement; damaged padding. |
|
| Pezas que faltan durante a montaxe | Parts overlooked in packaging. |
|
Especificacións
| Nome do modelo | Monkey Loop Floor Prime 3 Guitar Stand |
| Número de modelo | 10176054 |
| Marca | LAZO DE MONO |
| Material | Aceiro de aliaxe |
| Tipo de acabado | Pulido |
| Cor | Multicolor (primarily black with yellow accents) |
| Peso do elemento | 2 quilogramos |
| Dimensións do produto (L x W x H) | 15 x 11 x 62 cm (folded/packaged) |
| Capacidade | 3 Guitars (Acoustic, Electric, or Bass) |
| País de Orixe | China |
Garantía e Soporte
For product support, warranty information, or to inquire about replacement parts, please contact the official distributor:
Madridhifi.com
As the official distributor of Monkey Loop products, Madridhifi.com is committed to providing excellent service and quality support for your equipment and accessories.
Consulta a documentación da túa compra para coñecer os termos específicos da garantía e os datos de contacto.
