Manual de usuario da caixa de torre media Aerocool Cronus

1. Introdución

The Aerocool Cronus mid tower case is designed for high-performance PC builds, featuring a wide and sturdy chassis that supports E-ATX motherboards and offers three additional expansion slots for vertical graphics card installation. This case incorporates an X-shaped RGB LED front panel and a full tempered glass side panel, providing both aesthetic appeal and a clear view of internal components. It includes a 6-port PC fan hub for extensive ARGB lighting control and a GPU bracket to ensure graphics card stability. The pre-installed 140mm ARGB rear fan contributes to efficient cooling.

Figura 1.1: Fronte e lateral view of the Aerocool Cronus Mid Tower Case, highlighting its RGB LED front panel and tempered glass side panel.

2. Características clave

• Deseño dinámico: Features a tempered glass side panel, X-shaped RGB LED front panel, and a 14cm ARGB fan, enhancing the visual appeal of your PC build.
• GPU Bracket: An integrated GPU bracket provides stability for your graphics card, preventing sagging and ensuring reliable performance.
• Sistema de xestión de cables: Equipped with 6 cable grommets and 2 cable passthrough tubes for efficient and tidy cable routing, simplifying the build process and improving airflow.
• Maximized Performance: Engineered with a spacious interior and a sturdy chassis to accommodate various components and configurations, allowing for a customized and high-performance system.
• Convenient Connections: Includes a 6-port PC fan hub for connecting motherboards and accessories, offering extensive color combinations and customization options for ARGB lighting.

Figure 2.1: The Aerocool Cronus case integrated into a PC setup, demonstrating its aesthetic and functional presence.

3. Configuración e instalación

This section provides general guidelines for setting up your Aerocool Cronus Mid Tower Case. For detailed component-specific instructions, please refer to the manuals provided with your motherboard, power supply, and other hardware.

3.1. Preparación do caso

1. Unpack the case carefully and remove all packaging materials.
2. Coloque a caixa sobre unha superficie estable e plana.
3. Remove the tempered glass side panel by unscrewing the thumb screws and gently pulling it away. Set it aside on a soft, non-abrasive surface to prevent scratches.
4. Remove the opposite side panel to access the cable management area.

3.2. Instalación de compoñentes

1. Instalación da placa base: Install the necessary standoffs for your motherboard form factor (E-ATX, ATX, Micro-ATX, Mini-ITX). Carefully place the motherboard into the case, aligning it with the standoffs, and secure it with screws.
2. Instalación da fonte de alimentación: Mount the power supply unit (PSU) in the designated bottom compartment. Secure it with screws from the rear of the case.
3. Instalación da unidade de almacenamento: Install 2.5" SSDs and 3.5" HDDs into their respective drive bays. Utilize the tool-less mechanisms where available or secure with screws.
4. Instalación da tarxeta gráfica (GPU): Insert your graphics card into the appropriate PCIe slot on the motherboard. For vertical GPU installation, use the additional expansion slots and the included GPU bracket. Secure the GPU firmly.
5. Instalación do sistema de refrixeración: Install any additional fans or liquid cooling radiators as desired. The case supports various fan configurations and radiator sizes.

3.3. Xestión de cables

Utilize the cable grommets and passthrough tubes located behind the motherboard tray to route power cables and data cables neatly. This improves airflow and gives your build a cleaner appearance.

4. Instrucións de funcionamento

4.1. Acendido

After all components are installed and cables are connected, ensure the power supply switch is in the 'ON' position. Press the power button on the top I/O panel of the case to start your system.

4.2. Control de iluminación ARGB

The Aerocool Cronus case features an X-shaped RGB LED front panel and an ARGB rear fan, controlled via a 6-port PC fan hub. Lighting can be managed in two primary ways:

• Botón de control LED: Use the dedicated LED control button on the top I/O panel to cycle through various pre-set lighting effects and colors.
• Software da placa base: Connect the ARGB hub to a compatible ARGB header on your motherboard (e.g., 5V 3-pin ARGB header). This allows you to synchronize lighting effects across all compatible components using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). Refer to your motherboard manual for specific software instructions.

5. Mantemento e coidados

Un mantemento regular axuda a garantir un rendemento óptimo e unha maior lonxevidade da carcasa do teu PC.

• Limpeza do po: Limpe periodicamente os filtros de po (se os hai) e os compoñentes internos con aire comprimido. Asegúrese de que o sistema estea apagado e desconectado antes de limpalo.
• Limpeza exterior: Wipe the exterior surfaces, including the tempered glass panel, with a soft, damp pano. Evite produtos de limpeza abrasivos ou solventes que poidan danar o acabado.
• Comprobación do cable: Occasionally check internal cable connections to ensure they are secure and not obstructing airflow.

6 Solución de problemas

Esta sección aborda problemas comúns que podes atopar coa carcasa do teu PC.

7. Especificacións

Below are the technical specifications for the Aerocool Cronus Mid Tower Case.

Figura 7.1: Superposición de dimensiónsview and motherboard compatibility of the Aerocool Cronus case.

8. Garantía e soporte

For warranty information and technical support, please refer to the official AeroCool websitio web ou póñase en contacto co seu departamento de atención ao cliente. Garde o comprobante de compra para reclamacións de garantía.

• Soporte en liña: Visita o AeroCool official websitio para preguntas frecuentes, controladores e recursos de asistencia.
• Atención ao cliente: Contact AeroCool customer support for assistance with product issues or warranty inquiries.