1. Introdución
Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.
Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.
2. Que hai na caixa
Comprobe o contido do paquete para asegurarse de que estean presentes todos os elementos:
- 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
- 1 mando a distancia IR de 44 teclas
- 1 x 24V Power Adapter (US Plug)
3. Información de seguridade
Read all safety instructions before installation and use. Keep this manual for future reference.
- Só para uso en interiores: This product is designed for indoor use and is not waterproof.
- Fonte de alimentación: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
- Superficie de instalación: Asegúrese de que a superficie de instalación estea limpa, seca e lisa para un rendemento óptimo do adhesivo.
- Cortar a tira: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
- Evite o sobrequecemento: Do not coil the LED strip tightly when powered on, as this can cause overheating.
- Nenos e animais: Manteña o produto e os seus compoñentes fóra do alcance dos nenos e das mascotas.
4. Configuración e instalación
Siga estes pasos para a instalación correcta:
- Prepare a superficie: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
- Medir e cortar (se é necesario): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
- Engadir a tira: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
- Conectar enerxía: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
- Activar o control remoto: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.
Figure 2: Visual guide for LED strip installation steps.
Figure 3: Connection diagram and remote activation.
Figure 4: 3M Adhesive and Fixing Clips.
5. Instrucións de funcionamento
Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.
Figure 5: 44-Key IR Remote Control Layout.
Funcións de control remoto:
- On/Off: Power button to turn the lights on or off.
- Axuste de brillo: Usa o ↑ e ↓ botóns para aumentar ou diminuír o brillo.
- Selección de cor: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
- Cores para facer bricolaxe: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
- Preme a DIY botón.
- Usa o ↑ e ↓ arrows next to R, G, B to adjust the intensity of each primary color.
- Preme o mesmo DIY button again to save your custom color.
- Selección de modo: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
- FLASH: Jumps between colors.
- FADE3/FADE7: Fades between 3 or 7 colors.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- AUTOMÁTICO: Cycles through all modes.
- RÁPIDO/LENTO: Adjusts the speed of dynamic modes.
Figure 6: Remote control in use for ambient lighting.
6. Mantemento
Proper maintenance ensures the longevity of your LED strip lights.
- Limpeza: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
- Almacenamento: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
- Evita dobrar: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.
7 Solución de problemas
Se tes algún problema, consulta os seguintes problemas e solucións comúns:
| Problema | Causa posible | Solución |
|---|---|---|
| As luces non se acenden. |
|
|
| O control remoto non responde. |
|
|
| Colors are incorrect or inconsistent. |
|
|
8. Especificacións
| Característica | Detalle |
|---|---|
| Marca | Leproso |
| Número de modelo | PR410116-RGB-US |
| Tipo de fonte de luz | LED (5050 SMD) |
| Cor clara | RGB (Red, Green, Blue) + White, 16 Multicolored Options, 6 DIY Colors |
| Lonxitude | 39.4 pés (12 m) |
| Voltage | 24 Volts (Power Adapter) |
| Wattage | 18 Watts (Max Compatible) |
| Método de control | 44-Key IR Remote Control |
| Característica especial | Color Changing, Dimmable, 8 Dynamic Modes |
| Uso interior/exterior | Só interior |
| Material | Cobre, plástico |
| Peso do elemento | 9.6 onzas |
| Índice de reproducción da cor (CRI) | 85.00 |
Figure 7: ETL Listed 24V Power Adapter.
9. Garantía e soporte
Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro websitio.
Información de contacto:
- Websitio: www.lepro.com (Consulte o formulario oficial websitio web para obter a información de contacto máis actualizada).
- Correo electrónico: Consulte a embalaxe do produto ou websitio.
