Introdución
The Lithonia Lighting 65BEMW HL LED 30K 90CRI M6 is a 5-6 inch E-Series High Lumen LED recessed lighting module designed for energy-efficient illumination. This module is suitable for both retrofit applications in existing downlight cans and new construction or remodel installations. It provides a warm white light at 3000K with a high color rendering index (90CRI).
Características principais:
- Adjustable torsion spring and retention for fitment into 5" and 6" recessed cans.
- Energy-efficient LED technology with minimal wattage consumo.
- Dimmable down to 10% for adjustable light levels.
- CSA certified to US and Canadian safety standards.
- ENERGY STAR certified.
- Complies with California Title 24 Part 6 High Efficacy LED Light Source Requirements.
- Wet location listed.
- WSEC ASTM E283 for Air-Tight (with IC housings).
- Suitable for installation in standard and shallow-height rough-in sections.
Información de seguridade
AVISO: Risco de incendio ou descarga eléctrica. A instalación require coñecementos sobre os sistemas eléctricos das luminarias. Se non está cualificado, non intente a instalación. Póñase en contacto cun electricista cualificado.
- Desconecte a alimentación antes da instalación ou mantemento.
- Non faga nin altere ningún burato aberto nun recinto de cableado ou compoñentes eléctricos durante a instalación do kit.
- Para evitar danos ou abrasións no cableado, non expoña os cables a bordos de chapa ou outros obxectos cortantes.
- Este dispositivo non está pensado para usar con saídas de emerxencia.
- Asegúrese de que todas as conexións estean seguras e debidamente illadas.
- Non exceda a potencia máximatagClasificación e do dispositivo.
Contido do paquete
O paquete normalmente inclúe os seguintes compoñentes:
- 1x Lithonia Lighting 5" and 6" E-Series High Lumen LED Module (3000K Warm White, Baffle Trim, White)
Note: Additional installation hardware (e.g., recessed can housing) may be required and is sold separately.
Configuración e instalación
Follow these steps for proper installation of your Lithonia Lighting LED module. Ensure power is disconnected at the circuit breaker before beginning.
Step 1: Prepare the Recessed Can
Ensure the existing recessed can is compatible with 5-inch or 6-inch LED modules. Remove any existing bulb and trim.
Imaxe 1: Fronte view of the Lithonia Lighting 65BEMW HL LED module, showing the baffle trim and LED light source.
Paso 2: conectar o cableado
Locate the electrical connector from the recessed can. Connect the orange quick connector from the LED module to the corresponding connector in the recessed can. Ensure a secure connection.
Imaxe 2: Lado view of the LED module, illustrating the wiring and torsion springs for installation.
Step 3: Insert Module into Can
Compress the torsion springs on the sides of the LED module and carefully push the module into the recessed can. The springs will expand inside the can, holding the module securely in place. Ensure the module sits flush with the ceiling.
Imaxe 3: Diagram showing the dimensions of the LED module (7.625" overall diameter, 5.625" trim diameter, 2.75" height) and various certifications like Dimmable LED, Certified in Title 20, Title 24 Part 6, Center2Edge, and Wet Location.
Paso 4: restaurar a enerxía
Once the module is securely installed, restore power at the circuit breaker. Test the light to ensure proper function.
Instrucións de funcionamento
The Lithonia Lighting 65BEMW HL LED module operates like a standard light fixture once installed.
- Activar/Desactivar: Use your standard wall switch to turn the light module on or off.
- Adormecer: This LED module is dimmable down to 10%. For dimming functionality, ensure you have a compatible LED dimmer switch installed. The control method is typically app-based if using smart home systems, or via a physical dimmer switch.
Mantemento
The Lithonia Lighting LED module requires minimal maintenance.
- Limpeza: To clean the module, ensure power is off. Gently wipe the surface with a soft, dry or slightly damp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Duración da vida do LED: O LED integrado está deseñado para un uso a longo prazo e non require substitución da lámpada.
Resolución de problemas
If you encounter issues with your LED module, refer to the following common troubleshooting steps:
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. | Sen electricidade, conexión solta, interruptor defectuoso. | Comprobe o disxuntor. Asegúrese de que todas as conexións de cableado estean seguras. Probe o interruptor de parede. |
| A luz parpadea ou se atenúa de forma inadecuada. | Regulador de intensidade incompatible, cableado solto. | Ensure you are using an LED-compatible dimmer switch. Check wiring connections. |
| A luz non está enrasada co teito. | Torsion springs not properly engaged. | Carefully remove the module and re-insert, ensuring torsion springs are fully engaged inside the can. |
If the problem persists after trying these steps, contact a qualified electrician or Lithonia Lighting customer support.
Especificacións
| Característica | Detalle |
|---|---|
| Marca | Iluminación Lithonia |
| Número de modelo | 65BEMW HL LED 30K 90CRI M6 |
| Dimensións do produto | 6"L x 8"W x 3"H (Overall: 7.625" diameter, Trim: 5.625" diameter, Height: 2.75") |
| Tipo de fonte de luz | LED |
| Wattage | 12 vatios |
| Brillo | 1100 lúmenes |
| Eficiencia | 91.67 lúmenes/vatio |
| Cor clara | Branco cálido (3000K) |
| Índice de reproducción da cor (CRI) | 90CRI |
| Voltage | 120 voltios |
| Regulable | Si (ata o 10 %) |
| Método de control | App-Based Dimming Switch (compatible dimmer required) |
| Tipo de instalación | Empotrado |
| Uso interior/exterior | Indoor (Wet location listed) |
| Material | Metal |
| Certificacións | CSA, ENERGY STAR, California Title 24 Part 6, Wet Location Listed, WSEC ASTM E283 Air-Tight |
| Peso do elemento | 15.1 onzas |
| UPC | 193047859394 |
Garantía e Soporte
Información da garantía
This Lithonia Lighting LED module comes with a 5 ano de garantía limitada. Please refer to the official warranty documentation provided with your purchase for full terms and conditions.
Atención ao cliente
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Lithonia Lighting customer support.
- Visit the official Lithonia Lighting websitio para información de contacto.
- Have your model number (65BEMW HL LED 30K 90CRI M6) and purchase date ready when contacting support.
