1. Introdución
This instruction manual provides comprehensive guidance for the safe installation, operation, and maintenance of your Z-Lite 6 Light Chandelier, model 6015-6MB. Please read this manual thoroughly before beginning installation and retain it for future reference. Proper installation and adherence to these instructions will ensure optimal performance and safety.
The Z-Lite 6015-6MB is a 6-light chandelier featuring a matte black iron finish and a tiered geometric design, suitable for indoor use in living rooms and other general purpose areas. It is designed for semi-flush mount installation.
2. Información de seguridade
WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in serious injury or death.
- Todas as conexións eléctricas deben cumprir cos códigos e ordenanzas locais ou co Código Eléctrico Nacional (NEC). Consulte cun electricista cualificado se non está familiarizado coas conexións de cableado eléctrico axeitadas.
- Esta luminaria está pensada só para uso en interiores. Non a expoña á auga nin á humidade.
- Asegúrate de que a superficie de montaxe poida soportar o peso da luminaria.
- Use só o tipo de lámpada e o wat especificadostage (E12 base, 360 watts total maximum).
- Non conecte este aparello a un sistema eléctrico sen toma de terra.
- Proposición 65 Advertencia: Este produto pode conter produtos químicos que o estado de California sabe que causan cancro e defectos de nacemento ou outros danos reprodutivos.
3. Contido do paquete
Carefully unpack the fixture and check that all parts are present. Refer to the diagram below for identification of components. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.
- Corpo de luminaria de araña (1)
- Mounting Canopy (1)
- Downrod/Stem (1)
- Mounting Plate/Crossbar (1)
- Mounting Screws and Wire Nuts (Set)
- Manual de instrucións (1)

Imaxe: Fronte view of the Z-Lite 6 Light Chandelier 6015-6MB, showcasing its matte black finish and tiered wire design.
4. Configuración e instalación
Recoméndase a instalación profesional por parte dun electricista cualificado.
Ferramentas necesarias (non incluídas):
- Destornillador Phillips
- Destornillador de cabeza plana
- Pelacables
- Cinta eléctrica
- Escaleira
Pasos de instalación:
- Apagar a enerxía: Antes de comezar, asegúrese de que a alimentación da caixa de conexións estea desconectada no disyuntor ou na caixa de fusibles.
- Preparar a placa de montaxe: Attach the mounting plate/crossbar to the junction box using the provided mounting screws. Ensure it is securely fastened.
- Montar a varilla de subida: Thread the downrod onto the fixture body. Ensure all connections are tight.
- Conexións de cable:
- Connect the bare copper ground wire from the fixture to the ground wire from the junction box (usually green or bare copper) using a wire nut.
- Conecta o cable branco da luminaria ao cable branco (neutro) da caixa de conexións usando unha porca para cables.
- Conecta o cable negro da luminaria ao cable negro (continuo) da caixa de conexións usando unha porca para cables.
- Envolve todas as conexións dos cables con cinta illante para maior seguridade.
- Monte Canopy: Carefully push the wires into the junction box. Align the canopy with the mounting plate and secure it with the canopy screws.
- Instalar lámpadas: Screw in six (6) E12 base bulbs (not included) into the sockets. Do not exceed the maximum wattage of 60 watts per bulb or 360 watts total.
- Restaurar enerxía: Unha vez rematada a instalación, restableza a corrente no disxuntor.

Imaxe: En ángulo view of the Z-Lite 6 Light Chandelier 6015-6MB, showing the internal bulb sockets and wire cage design.
5. Instrucións de funcionamento
Once properly installed and wired, the Z-Lite 6 Light Chandelier operates like any standard ceiling light fixture. It is designed to be controlled by a wall switch.
- Activar/Desactivar: Use the wall switch connected to the fixture to turn the chandelier on or off.
- Función de atenuación: This fixture is compatible with standard dimmer switches. If a dimmer switch is installed, you can adjust the light output by manipulating the dimmer control. Ensure that the bulbs used are also dimmable.
6. Mantemento
Un mantemento regular axudará a preservar a aparencia e a funcionalidade da súa lámpada de araña.
- Limpeza: Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Substitución da lámpada: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before touching. Unscrew old bulbs and replace with new E12 base bulbs, not exceeding 60 watts per bulb.
- Inspección: Comprobe periodicamente que todas as conexións eléctricas e os accesorios de montaxe estean ben axustados.
7 Solución de problemas
Se tes problemas coa túa lámpada de araña, consulta os seguintes problemas e solucións comúns:
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. |
|
|
| As luces parpadean. |
|
|
| O aparello zumba. |
|
|
8. Especificacións

Image: Dimensional drawing of the Z-Lite 6 Light Chandelier 6015-6MB, showing key measurements including 25" width, 25" length, and 22" height.
| Número de modelo: | 6015-6 MB |
| Marca: | Z-Lite |
| Material: | Ferro |
| Tipo de acabado: | Negro Mate |
| Dimensións (L x W x H): | 25 cm de longo x 22 cm de ancho x 25 cm de alto |
| Peso do artigo: | 16 libras |
| Número de fontes de luz: | 6 |
| Base da lámpada: | E12 |
| Max Wattage (por lámpada): | 60 watts (360 watts total) |
| Voltage: | 120 voltios |
| Tipo de instalación: | Semi Flush Mount, Ceiling Mount |
| Uso interior/exterior: | Interior |
| Método de control: | Wall Switch (Dimmer compatible) |
| Certificación: | UL Listed (CUL/cETLu) |
9. Garantía e soporte
Garantía: This Z-Lite product is covered by a manufacturer's warranty. Please refer to the original purchase documentation or contact Z-Lite customer service for specific warranty terms and conditions.
Atención ao cliente: For technical assistance, missing parts, or warranty inquiries, please contact Z-Lite customer support. Contact information can typically be found on the manufacturer's websitio web ou o seu recibo de compra.
Conserve o comprobante de compra para reclamacións de garantía.





