1. Produto rematadoview
The Montech X3 Mesh is an ATX Mid-Tower PC Gaming Case designed for high airflow and visual appeal. It comes equipped with six pre-installed fixed RGB lighting fans (3x 140mm in the front, 2x 120mm on top, and 1x 120mm in the rear) to optimize cooling and provide vibrant illumination. The case features a unique door-open tempered glass side panel for easy access and a full panoramic view dos seus compoñentes internos.
Figure 1: Montech X3 Mesh PC Gaming Case (Black)
2. Guía de configuración
2.1 Desembalaxe e inspección inicial
Carefully remove the case from its packaging. Inspect for any signs of damage during transit. Ensure all accessories, including screws and cable ties, are present.
2.2 Instalación de compoñentes
The Montech X3 Mesh supports ATX, Micro-ATX, and Mini-ITX motherboards. It offers ample space for CPU coolers up to 160mm high and GPUs up to 305mm long.
Figure 2: Internal Component Clearance
2.2.1 Instalación da placa base
- Open the tempered glass side panel by gently pulling the fabric tab.
- Instale a protección de E/S no recorte da placa base na parte traseira da caixa.
- Align your motherboard with the standoffs inside the case and secure it with screws.
2.2.2 Instalación da Unidade de Alimentación (PSU).
The PSU is mounted at the rear bottom of the case. The case supports PSUs up to 160mm in length.
- Slide the PSU into its designated compartment from the rear of the case.
- Secure the PSU with screws from the outside.
2.2.3 Instalación da unidade de almacenamento
The case provides bays for 2x 2.5" SSDs behind the motherboard tray and 2x 3.5" HDDs (or 2x 2.5" SSDs) in a removable cage below the PSU shroud.
Figure 3: Drive Bay Locations
- For 2.5" SSDs, mount them directly onto the SSD brackets behind the motherboard tray.
- For 3.5" HDDs, slide them into the drive cage located under the PSU shroud and secure. The drive cage is removable for easier installation or to create more space.
2.2.4 Instalación da tarxeta gráfica (GPU)
Install your graphics card into the appropriate PCIe slot on your motherboard and secure it with the provided screws.
2.3 Xestión de cables
The Montech X3 Mesh offers dedicated cutouts and tie-down points behind the motherboard tray for efficient cable routing, ensuring a clean build and improved airflow.
Figure 4: Smart Cable Management Features
3. Instrucións de funcionamento
3.1 Acendido
Connect your power cable to the PSU and press the power button located on the top I/O panel.
Figura 5: Panel de E/S superior
3.2 Control de iluminación RGB
The X3 Mesh features fixed RGB lighting fans. To turn the fan lighting on or off, simply press the dedicated LED button on the top I/O panel. Note that the lighting is fixed and not addressable.
Video 1: Demonstration of RGB Lighting Fans
This video showcases the fixed RGB lighting of the fans within the Montech X3 Mesh case, highlighting their visual effect when powered on.
3.3 Fluxo de aire e refrixeración
The case is designed for high airflow, with triple 140mm fans in the front providing massive air intake and pre-mounted fans at the top and rear for optimal exhaust. This configuration helps maintain low temperatures for your components.
Figure 6: Optimized Airflow Design
4. Mantemento
4.1 Limpeza dos filtros de po
The Montech X3 Mesh includes a magnetic dust filter on the top panel and a washable dust filter for the PSU intake at the bottom. Regularly clean these filters to prevent dust buildup and maintain optimal airflow.
- Gently remove the magnetic dust filter from the top panel.
- Slide out the PSU dust filter from the bottom of the case.
- Clean the filters using compressed air or by washing them with water (ensure they are completely dry before re-installation).
4.2 Limpeza xeral
Use a soft, dry cloth to wipe down the exterior of the case, including the tempered glass panel. For stubborn smudges on the glass, a glass cleaner can be used sparingly on the cloth, not directly on the panel.
5 Solución de problemas
5.1 Fans Not Spinning / RGB Not Lighting Up
- Ensure all fan Molex connectors are securely connected to your power supply. The pre-installed fans are daisy-chained, so check the connection to the last fan in the chain.
- Verify that the LED button on the top I/O panel is pressed to activate the RGB lighting.
- Check the power supply connections to the fan hub (if applicable) and the motherboard.
5.2 Poor Airflow / High Temperatures
- Clean all dust filters as described in Section 4.1.
- Ensure proper cable management to avoid obstructing airflow paths inside the case.
- Verify that all fans are spinning correctly.
6. Especificacións técnicas
| Característica | Especificación |
|---|---|
| Nome do modelo | X3 MESH Black |
| Tipo de caso | Torre media |
| Compatibilidade da placa base | ATX, Micro ATX, Mini ITX |
| Dimensións (LxWxH) | 14.57 x 8.27 x 18.9 polgadas |
| Peso do elemento | 14.3 libras |
| Material | Tempered Glass (Side Panel) |
| Ventiladores preinstalados | Front: 3x 140mm Fixed RGB Top: 2x 120mm Fixed RGB Rear: 1x 120mm Fixed RGB |
| Soporte de fans | Front: 3x 120mm/140mm Top: 2x 120mm/140mm Parte traseira: 1x 120mm |
| Soporte radiador | Parte superior: ata 280 mm Front: Up to 360mm (with HDD cage removed) |
| Liquidación do refrigerador da CPU | 160 mm |
| Liquidación de GPU | 305 mm |
| Unidade Bays | 2 unidades SSD de 2.5 polgadas 2x 3.5" HDD (convertible to 2.5" SSD) |
| Portos de E/S | 2x USB 2.0, 1x USB 3.0, HD Audio (Mic/Headphone), Power Button, Reset Button, LED Control Button |
| Tipo de montaxe da fonte de alimentación | Montaxe traseira |
7. Garantía e soporte
For warranty information, technical support, or to inquire about replacement parts, please refer to the official Montech websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o recibo da compra como proba de compra para reclamacións de garantía.
Montech offers various protection plans for extended coverage. Please visit the product page on Amazon or Montech's official website for details on available plans.
