Mahli Robotic 3-in-1 Vacuum Cleaner

Introdución

Thank you for choosing the Mahli Robotic 3-in-1 Vacuum Cleaner. This intelligent omni-directional robotic vacuum is designed to simplify your home cleaning routine, effectively cleaning hardwood and tile floors. Please read this manual thoroughly before operating the device to ensure safe and optimal performance.

Instrucións de seguridade importantes

Cando se utilice un aparello eléctrico, sempre se deben seguir as precaucións básicas, incluíndo as seguintes:

• Lea todas as instrucións antes de usar este aparello.
• Do not operate the vacuum cleaner in areas with flammable or combustible liquids, gases, or explosive dust.
• Manteña o cabelo, a roupa solta, os dedos e todas as partes do corpo lonxe das aberturas e das partes móbiles.
• Non coller nada que arde ou fume, como cigarros, mistos ou cinzas quentes.
• Non o use sen o colector de po e/ou os filtros colocados.
• Use só como se describe neste manual. Empregue só os accesorios recomendados polo fabricante.
• Non permita que se use como xoguete. É necesario prestar moita atención cando o usen ou preto dos nenos.
• Desenchufe da toma de corrente cando non estea en uso e antes de realizar o servizo.
• Se o aparello non funciona como debería, caído, danado, deixado ao aire libre ou caído á auga, devólvelo a un centro de servizo.

Contido do paquete

Comprobe o contido do paquete ao abrilo para asegurarse de que estea presente todos os elementos:

• Mahli Robotic 3-in-1 Vacuum Cleaner (MBOT3002BK)
• Cable de carga
• Side Brushes (pre-installed or separate)
• Manual de usuario (este documento)

Image: The Mahli Robotic 3-in-1 Vacuum Cleaner, showcasing its sleek, circular design and top panel.

Compoñentes do produto

Familiarize yourself with the different parts of your robotic vacuum:

Imaxe: Arriba view of the Mahli Robotic Vacuum, highlighting the power button and the access panel for the dustbin.

• 1. Botón de acendido: Prema para iniciar/deter a limpeza.
• 2. Dustbin Cover: Lift to access the dustbin.
• 3. Luz indicadora: Shows charging status and operational mode.

Imaxe: Parte inferior view of the Mahli Robotic Vacuum, showing the two side brushes, driving wheels, and the removable filter compartment.

• 4. Side Brushes: Sweep debris into the vacuum's path.
• 5. Driving Wheels: Allow the vacuum to move across surfaces.
• 6. Contactos de carga: For connecting to the charging cable.
• 7. Dustbin Release: Button or latch to remove the dustbin.
• 8. Filtro: Captures fine dust and particles.

Configuración

1. Desempaquetar: Retire con coidado o aspirador e todos os accesorios da embalaxe.
2. Carga de batería: Before first use, fully charge the vacuum cleaner. Connect the charging cable to the vacuum's charging port and plug the adapter into a wall outlet. The indicator light will show charging status (e.g., red for charging, blue for fully charged). A full charge takes approximately 2 hours.
3. Instalar os cepillos laterais: If not pre-installed, gently push the side brushes onto their respective posts on the bottom of the vacuum until they click into place.
4. Preparar a área de limpeza: Remove any large obstacles, loose cables, or small items from the floor that could entangle the vacuum or obstruct its path.

Instrucións de funcionamento

1. Starting a Cleaning Cycle:

   Ensure the vacuum is fully charged and placed on the floor in the area you wish to clean. Press the power button on the top of the vacuum. The indicator light will turn blue, and the vacuum will begin its cleaning cycle.
2. Stopping a Cleaning Cycle:

   To pause or stop the vacuum during operation, press the power button again. The vacuum will stop, and the indicator light may change color or turn off.

3. Limpeza automática:

   The Mahli Robotic Vacuum uses intelligent omni-directional technology to navigate and clean your floors. It will automatically adjust its path to cover the cleaning area and avoid obstacles. It is designed for hard floors such as hardwood and tile.

Mantemento

Regular maintenance is crucial for optimal performance and longevity of your robotic vacuum. Always turn off the vacuum and unplug it before performing any maintenance.

1. Baleirar o lixo:

   It is recommended to empty the dustbin after each cleaning cycle or when the dustbin full indicator (if available) illuminates. Lift the dustbin cover, remove the dustbin, and empty its contents into a trash can. Rinse the dustbin with water if necessary, but ensure it is completely dry before reinserting.

2. Limpeza do filtro:

   The filter should be cleaned regularly, ideally after every 1-3 uses depending on usage. Tap the filter gently to remove dust. For a deeper clean, the filter can be rinsed under running water. Allow the filter to air dry completely for at least 24 hours before reinserting it into the dustbin.
3. Cepillos laterais de limpeza:

   Check the side brushes periodically for tangled hair or debris. Gently pull them off their posts to clean. If brushes are worn or damaged, replace them with new ones.

4. Cleaning Wheels:

   Inspect the driving wheels for any hair or debris that might impede movement. Clean as needed.

5. Limpeza de sensores:

   Wipe the sensors (located on the bottom and front of the vacuum) with a clean, dry cloth to ensure proper navigation.

Resolución de problemas

If you encounter issues with your Mahli Robotic Vacuum, please refer to the following common problems and solutions:

Especificacións

Garantía e Soporte

Mahli products are manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your product or visit the official Mahli websitio. Garde o recibo da compra como xustificante da mesma.

For further assistance, please contact Mahli Customer Service.