1. Introdución
Thank you for choosing the NVS AMP50 B III UHF 1 Output Pole Amplifier. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your amplifier. Please read this manual thoroughly before using the product and retain it for future reference.
2. Información de seguridade
Instrucións de seguridade importantes:
- Ensure the power supply (PSUP01, not included) is disconnected before installation or maintenance.
- This device is designed for outdoor pole mounting. Ensure it is securely fastened.
- Protect all connections from moisture. The included rain cover must be used.
- Non expoña o amplifier to extreme temperatures or direct sunlight for prolonged periods without proper shielding.
- Only use a 12V DC power supply as specified. Using an incorrect power supply may damage the device and void the warranty.
- Se non tes claros algúns pasos, a instalación debe ser realizada por un técnico cualificado.
3. Contido do paquete
Verifica que todos os elementos estean presentes no paquete:
- NVS AMP50 B III UHF 1 Output Pole Ampmáis vivo
- Cuberta de choiva
- Manual de usuario (este documento)
Note: The PSUP01 12V DC power supply is not included and must be purchased separately.
4. Características do produto
The NVS AMP50 is a vertical audio amplifier designed to boost B III and UHF signals, ensuring optimal reception.
- Vertical audio amplifier with wide-band input (B III + UHF).
- Separate gain adjustments for B III (max. 18 dB) and UHF (max. 30 dB).
- Single signal output with F-connectors.
- Powered by 12V DC from the signal drop line via a PSUP01 power supply (not included).
- Includes a rain cover for outdoor protection.
Figura 4.1: NVS AMP50 B III UHF 1 Output Pole Amplifier. This image shows the compact design of the amplifier, highlighting its F-connectors for signal input and output, and the robust casing designed for outdoor use with a rain cover.
5. Configuración e instalación
Follow these steps for proper installation of your NVS AMP50 ampmáis vivo:
- Montaxe: Monte de forma segura o amplifier to a pole in a suitable outdoor location, preferably close to the antenna. Ensure the mounting is stable and can withstand environmental conditions.
- Conexión antena: Connect your B III and UHF antenna cables to the respective input F-connectors on the amplifier. Ensure connections are tight and secure.
- Conexión de saída: Conecta o amplifier's single output F-connector to your signal drop line, which leads to your television or distribution system.
- Cuberta de choiva: Place the provided rain cover over the amplifier to protect it from weather elements. Ensure it is properly seated to prevent water ingress.
- Power Supply (PSUP01): Connect the 12V DC power supply (PSUP01, not included) to the signal drop line. The amplifier receives power through this line. Ensure the power supply is connected indoors and away from moisture.
- Encendido: Once all connections are secure and protected, plug in the PSUP01 power supply.
6. Instrucións de funcionamento
The NVS AMP50 amplifier is designed for continuous operation once installed.
- Axuste de ganancia: O amplifier features separate rotary controls for B III and UHF gain adjustment. Use a small screwdriver to carefully adjust the gain for each band to achieve optimal signal strength without over-amplification. Start with the lowest gain setting and gradually increase until desired signal quality is achieved on your television.
- Monitorización de sinal: Monitor your television's signal strength and quality indicators while adjusting the gain. Over-amplification can lead to signal distortion.
- Indicador de potencia: The PSUP01 power supply typically has an LED indicator to confirm it is receiving power and supplying it to the ampmáis vivo.
7. Mantemento
The NVS AMP50 ampO lificador require un mantemento mínimo.
- Inspección periódica: Inspeccionar periodicamente o amplifier and its connections for any signs of wear, corrosion, or damage, especially after severe weather conditions.
- Cuberta de choiva: Ensure the rain cover remains securely in place and is not damaged. Replace if necessary.
- Limpeza: If necessary, gently clean the exterior of the amplifier cun brando, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the power supply is disconnected before cleaning.
- Integridade da conexión: Check F-connections for tightness to prevent signal loss or ingress of moisture.
8 Solución de problemas
Se tes problemas co teu amplificador, consulte a seguinte guía de resolución de problemas:
| Problema | Causa posible | Solución |
|---|---|---|
| Sen sinal ou mala calidade do sinal |
|
|
| Signal distortion or pixelation |
|
|
| Water ingress in ampmáis vivo |
|
|
If the problem persists after following these steps, please contact customer support.
9. Especificacións
| Característica | Detalle |
|---|---|
| Fabricante | NVS |
| Número de modelo | AMP50 |
| ASIN | B0972HCQRK |
| Input Bands | B III, UHF |
| B III Gain Adjustment | Máx. 18 dB |
| UHF Gain Adjustment | Máx. 30 dB |
| Canles de saída | 1 |
| Conectores | Tipo F |
| Power Supply (Input Voltage) | 12V DC (via PSUP01, not included) |
| Tipo de instalación | Surface Mount (Pole Mount) |
| Dimensións (envío) | 18 x 12 x 5 cm |
| Peso (envío) | 164 gramos |
10. Garantía e soporte
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official NVS websitio. Garda o comprobante de compra para reclamacións de garantía.
For further assistance, please contact NVS customer support through their official channels.
