1. Produto rematadoview
This manual provides instructions for the Okin Oval Shape 2 Button Hand Control Handset, designed as a replacement part for power recliners, lift chairs, and electric sofas. It features a 5-pin plug for connection to the recliner motor and two buttons for operation.
Figure 1: Okin Oval 2 Button Recliner Hand Control with its attached cable and 5-pin plug.
2. Información de seguridade
PRECAUCIÓN:
- This is a replacement part for a power recliner. Always follow the manufacturer's instructions for safe installation and operation of your recliner.
- Keep the control away from water and other liquids to prevent electrical hazards.
- Do not attempt to repair or modify the electrical components of the hand control.
- In case of a malfunction, disconnect power to the recliner and contact a qualified technician or customer support immediately.
3. Configuración e instalación
Before installation, ensure the power to your recliner is disconnected from the wall outlet.
- Identificar o porto de conexión: Locate the existing hand control's connection port on your recliner's motor or control box. This is typically a 5-pin circular port.
- Connect the Hand Control: Align the 5-pin plug of the new Okin hand control with the corresponding port on your recliner. Gently push the plug in until it is firmly seated. The plug is designed with a 90-degree angle for easy connection in tight spaces.
- Secure the Control (if applicable): If your recliner has a designated slot for the oval-shaped control, insert it securely. The control may come with a separate bezel for a flush fit.
- Restaurar enerxía: Once the control is securely connected, plug your recliner back into the wall outlet.
Figure 2: The 5-pin plug of the hand control, designed for secure connection.
Figure 3: Visual guide for connecting the 5-pin curved plug to the recliner motor.
Figure 4: The hand control shown with its removable oval bezel, which helps secure it in place.
4. Instrucións de funcionamento
The Okin Oval 2 Button Hand Control is designed for simple and intuitive operation of your power recliner.
Figure 5: The two-button interface of the hand control, with visible indicator lights.
- Indicador de potencia: A luz LED verde indicates that the control is receiving power.
- Indicador de operación: An orange LED light illuminates when a button is pressed, indicating that an operation command is being sent to the motor.
- Funcións do botón:
- Preme o botón superior to extend the recliner footrest and recline the backrest.
- Preme o botón inferior to retract the recliner footrest and return the backrest to the upright position.
5. Mantemento
To ensure the longevity and proper functioning of your Okin hand control, follow these simple maintenance guidelines:
- Limpeza: Wipe the surface of the hand control with a clean, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the control. Do not use abrasive cleaners or solvents.
- Inspección de cables: Periodically check the cable for any signs of wear, fraying, or damage. If damage is observed, discontinue use and seek a replacement.
- Comprobación de conexión: Ensure the 5-pin plug remains firmly connected to the recliner motor. A loose connection can lead to intermittent operation.
- Condicións ambientais: Avoid exposing the control to extreme temperatures, direct sunlight for prolonged periods, or high humidity.
6 Solución de problemas
If you experience issues with your Okin hand control, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| Control does not respond / Recliner does not move. | No power to the recliner; Loose connection; Incompatible motor. | Ensure recliner is plugged into a working outlet. Check that the 5-pin plug is fully inserted. Verify your recliner motor is compatible with a 5-pin Okin-style control (compatible with OKIN single motor, Dewert, Limoss, and Ashley). |
| Green LED is off. | Sen poder para o control. | Check recliner power cord connection to the wall and to the motor. Ensure the 5-pin plug is securely connected. |
| Orange LED flashes but recliner does not move. | Motor issue; Overload protection activated. | Disconnect power for 5-10 minutes to reset the motor's thermal protection. If the issue persists, the motor may require professional inspection. |
Se os pasos de resolución de problemas non resolven o problema, póñase en contacto co servizo de atención ao cliente.
7. Especificacións
| Característica | Detalle |
|---|---|
| Nome do modelo | Ovalado |
| Número de modelo do artigo | JLDK.20.02.07 |
| Forma | Ovalado |
| Botóns | 2 botóns |
| Tipo de enchufe | 5-Pin (90-degree angle) |
| Lonxitude do cable | 78.7 polgadas (200 cm) |
| Material | ABS (durable) |
| Luces indicadoras | Green (Power On), Orange (Operation) |
| Compatibilidade | OKIN single motor, Dewert, Limoss, Ashley |
| Peso do elemento | 5 onzas |
| Dimensións do paquete | 8.74 x 7.01 x 2.17 polgadas |
8. Atención ao cliente
For any questions, concerns, or assistance with your Okin Recliner Hand Control, please contact our dedicated support team. We are committed to ensuring a seamless setup process and satisfactory experience.
Refer to your product packaging or the retailer's websitio para obter información de contacto específica.
