Manual de instrucións do candado do volante con combinación de 5 díxitos Tevlaphee TSYB01

Produto rematadoview

The Tevlaphee TSYB01 is a heavy-duty, keyless 5-digit combination steering wheel lock designed to provide enhanced anti-theft security for your vehicle. Constructed from high-performance zinc alloy and steel, it offers resistance against cutting and sawing. Its universal fit accommodates a wide range of steering wheels, making it suitable for cars, vans, trucks, and SUVs.

Image: The Tevlaphee TSYB01 Steering Wheel Lock and its accompanying tools.

Características clave

• Anti-Theft Deterrent: Designed to prevent unauthorized vehicle operation by securing the steering wheel.
• High Security 5-Digit Combination: Offers 100,000 possible combinations, making it nearly impossible to crack.
• Comodidade sen chave: Eliminates the need for keys, allowing for quick locking and unlocking with a personalized code.
• Construción duradeira: Made from high-performance zinc alloy and steel for superior strength and resistance to tampering.
• Ajuste universal: Adjustable to fit steering wheels with an inner diameter between 6.1 and 14.9 inches.
• Revestimento protector: Features a plastic coating to prevent scratches and enhance weather resistance.

Image: The lock's primary functions include anti-theft, potential self-defense, and a window-breaking capability for emergencies.

Contido do paquete

• 1 x Tevlaphee TSYB01 Steering Wheel Lock Unit
• 1 x Screwdriver (for combination reset)
• 1 x Code Resetter Tool (for combination reset)

Instrucións de configuración

1. Setting Your Personal Combination

The original factory code is 0-0-0-0-0. To set your desired 5-digit combination:

1. Ensure the lock is in the unlocked position (using the default 0-0-0-0-0 code).
2. Locate the small screw on the side of the combination mechanism, labeled "SET". Use the provided screwdriver to remove this screw and the protective cover plate.
3. Insert the smaller code resetter tool into the exposed "SET" button/hole and push it down. While holding it down, slide the button to the "SET" position (usually by moving it towards the end of the lock).
4. While the reset button is in the "SET" position, rotate each of the 5 dials to your desired new combination. Ensure the numbers are aligned with the reference mark.
5. Once your new code is set, push the reset button back to its original position.
6. Reattach the protective cover plate and secure it with the screw.
7. Importante: Scramble the dials immediately after setting your code to lock it. Remember your new password. It is recommended to write it down or take a picture for safekeeping, as forgetting it will prevent unlocking.

Image: Visual guide illustrating the process of setting a new 5-digit combination.

2. Installing the Steering Wheel Lock

1. Ensure your personal 5-digit combination is correctly entered to unlock the device.
2. Extend the lock by pulling the two ends apart until it fits over your steering wheel. The design allows the hooks to fix themselves on opposite spokes of the steering wheel.
3. Adjust the length to ensure a tight and secure fit on your steering wheel.
4. Once securely in place, scramble the combination dials to lock the device.

Image: The Tevlaphee lock securely positioned across a car's steering wheel.

Instrucións de funcionamento

Bloqueo do dispositivo

1. Install the lock onto your steering wheel as described in the "Installation" section.
2. Once the lock is firmly in place, rotate the combination dials to scramble the numbers. This will secure the lock and prevent unauthorized removal.

Desbloqueando o dispositivo

1. Align the combination dials to your personal 5-digit code.
2. The lock will release, allowing you to remove it from the steering wheel.

Mantemento

To ensure optimal performance and longevity of your Tevlaphee steering wheel lock, keep the combination dials clean and free from debris. Periodically check for any signs of wear or damage. Avoid using harsh chemicals for cleaning; a damp o pano é suficiente.

Resolución de problemas

Difficulty in Setting Combination

• Ensure the reset button is fully pushed down and slid to the "SET" position before attempting to change the numbers.
• Verify that the original code (0-0-0-0-0) was correctly entered before attempting to reset.

Lock Not Engaging/Disengaging

• Double-check that the combination dials are perfectly aligned with your set code when unlocking.
• Ensure the lock is fully extended and the hooks are properly seated on the steering wheel spokes during installation.

Especificacións

Garantía e Soporte

For warranty information, technical support, or any inquiries regarding your Tevlaphee TSYB01 Steering Wheel Lock, please refer to the contact information provided in your product packaging or visit the official Tevlaphee websitio.