1. Introdución
Thank you for choosing the Imetec Eco Ceramic Fan Heater, Model 4033. This appliance is designed to provide efficient and comfortable heating for your indoor spaces. Featuring advanced ceramic technology, it offers rapid heating with reduced energy consumption. Please read this manual carefully before use to ensure safe and optimal operation.
Figure 1: Imetec Eco Ceramic Fan Heater, Model 4033.
2. Información de seguridade
Siga sempre as precaucións de seguridade básicas ao usar electrodomésticos para reducir o risco de incendio, descarga eléctrica e lesións ás persoas.
- Non cubra a calefacción para evitar o sobrecalentamiento.
- Manteña os materiais inflamables lonxe do quentador.
- Do not use in bathrooms or wet areas.
- Asegurar o voltage specified on the rating label corresponds to your mains supply voltage.
- Desenchufe o aparello cando non estea en uso ou antes de limpalo.
3. Características do produto
- Tecnoloxía cerámica: Ofrece un quecemento rápido e eficiente.
- Aforro de enerxía: Reduced energy consumption by up to 40%.
- Versatile Temperature Settings: Offers 3 temperature levels (cool, warm, very warm) for year-round use.
- Anti-Dust Filter: Helps maintain air quality.
- Ambient Thermostat: Allows you to select and maintain your desired room temperature.
Consumo de enerxía reducido
3 niveis de temperatura
Filtro antipolvo
Termostato ambiente
4. Configuración
- Desembalaxe: Carefully remove the fan heater from its packaging. Retain the packaging for future storage or transport.
- Colocación: Place the heater on a firm, level surface, ensuring it is at least 1 meter (3 feet) away from walls, furniture, and curtains. Do not place it directly under a power socket.
- Conexión de alimentación: Ensure the heater is switched off (turn the control knob to '0' or 'OFF'). Plug the power cord into a suitable 240V AC electrical outlet.
Figure 2: Ensure proper placement and connection.
5. Instrucións de funcionamento
The Imetec Eco Ceramic Fan Heater features a control knob for power and temperature settings, and a thermostat knob for ambient temperature control.
Figure 3: Control knob for power and temperature settings.
- Power On/Temperature Selection:
- Turn the main control knob clockwise to select the desired operating mode:
- Fan Only (Cool Air): For air circulation without heat.
- Low Heat (Warm Air): For gentle heating, typically 1200W.
- High Heat (Very Warm Air): For rapid and powerful heating, typically 2000W.
- Axuste do termostato:
- Once a heat setting is selected, turn the thermostat knob (usually the inner knob) clockwise to increase the desired room temperature.
- The heater will operate until the set temperature is reached, then cycle on and off to maintain it.
- Turn the thermostat knob counter-clockwise to decrease the desired temperature.
- Apagado: Turn the main control knob counter-clockwise to the '0' or 'OFF' position. Unplug the appliance from the power outlet when not in use for extended periods.
Figure 4: The fan heater provides comfortable warmth in various indoor environments.
6. Mantemento
Regular maintenance ensures the longevity and efficient operation of your fan heater.
- Limpeza do exterior:
- Desconecte sempre o quentador e déixeo arrefriar completamente antes de limpalo.
- Limpe as superficies exteriores cun suave, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Asegúrate de que non entre auga no interior do aparello.
- Cleaning the Anti-Dust Filter:
- The anti-dust filter is located at the rear of the unit.
- Gently remove the filter cover and the filter itself.
- Clean the filter with a soft brush or vacuum cleaner to remove accumulated dust.
- Rinse the filter under running water if necessary, ensuring it is completely dry before reinserting.
- Reattach the filter and cover securely.
- Almacenamento: If storing the heater for an extended period, clean it thoroughly and store it in its original packaging in a dry, cool place.
Figure 5: Location of the anti-dust filter at the back of the unit.
7 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O quentador non se acende. | Not plugged in; power switch off; no power at outlet; safety cut-out activated. | Check power cord connection; ensure main control knob is on a heat setting; check household fuse/circuit breaker; unplug, wait 10 minutes, then plug in again. |
| Sen calefacción, só funciona o ventilador. | Main control knob set to fan-only mode; thermostat set too low. | Turn main control knob to a heat setting (Low Heat or High Heat); increase thermostat setting. |
| Heater produces unusual noise. | Dust accumulation on fan blades; loose internal component. | Clean the anti-dust filter and fan area (ensure unit is unplugged); if noise persists, contact customer support. |
| O quentador cheira a queimado. | Dust on heating elements; new unit initial burn-off. | Unplug immediately. Clean dust from elements (when cool). If new, a slight smell is normal for first few uses. If smell persists or is strong, discontinue use and contact support. |
8. Especificacións
| Marca | Imetec |
| Modelo | 4033 |
| Cor | Branco |
| Voltage | 240 voltios |
| Número de velocidades | 3 |
| Características especiais | Electric, Ceramic Technology, Thermostat |
| Peso do elemento | 1.57 quilogramos |
| Dimensións (L x W x H) | 34.79 x 24.8 x 18.9 cm |
| Factor de forma | Pedestal |
| Uso interior/exterior | Interior |
9. Garantía e soporte
This Imetec Eco Ceramic Fan Heater, Model 4033, comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty duration and coverage details.
For technical support, troubleshooting assistance beyond what is provided in this manual, or warranty claims, please contact Imetec Customer Service. Contact information can typically be found on the official Imetec websitio web ou na embalaxe do produto.
Recursos en liña: For additional information and support, visit the official Imetec websitio: www.imetec.com
