Introdución
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Okin Refined-R Power Recliner Motor Actuator. This motor is designed as a direct replacement for Okin JLDQ.14.270.114A and can also replace JLDQ.14.270.114F series motors, with minor differences that do not affect functionality.
The actuator motor set includes one motor and one connector. The connector features a 2-pin plug with a clip, specifically designed for connection to the master motor or power supply.
Figura 1: Máisview of the Okin Refined-R JLDQ-14 Power Recliner Motor Actuator.
Configuración e instalación
Before beginning installation, ensure your recliner's power is disconnected. It is crucial to verify that the replacement motor's brand and model match your existing unit to ensure compatibility with your recliner's frame, which has specific requirements for actuator dimensions, stroke, and plugs.
Verificación de compatibilidade:
- Confirm your existing motor is an Okin JLDQ.14.270.114A or JLDQ.14.270.114F series.
- Ensure the physical dimensions and plug type (2-pin with clip) are consistent with your recliner's requirements.
Imaxe 2: Primeiro plano view of the motor's identification label, showing model and specifications.
Pasos de instalación:
- Desconectar a enerxía: Unplug the recliner from the wall outlet to prevent accidental operation during installation.
- Retirar o motor antigo: Carefully detach the old motor from the recliner frame. Note how it is mounted and connected.
- Conectar o novo motor: Attach the new Okin motor to the recliner frame using the existing mounting points. Ensure it is securely fastened.
- Conexión de enchufe: Connect the 2-pin plug from the new motor to the corresponding receptacle on your recliner's power supply or control box. Ensure the clip engages properly for a secure connection.
Figure 3: Detail of the 2-pin plug for connecting to the power supply.
The installation process is designed to be straightforward. Once installed, the motor operates quietly.
Instrucións de funcionamento
The Okin Refined-R motor actuator is an integral component of your power recliner, enabling smooth and controlled movement. Operation is typically controlled via the recliner's hand control or integrated buttons.
Operación estándar:
- Once installed and connected to power, use your recliner's standard controls (buttons or remote) to extend or retract the footrest and recline the backrest.
- The motor is designed for intermittent use. Its operational frequency is specified as Activado 1 minuto / Apagado 8 minutos. This duty cycle ensures the longevity and proper functioning of the motor by allowing it to cool down between operations. Avoid continuous operation beyond the recommended duty cycle.
Mantemento
To ensure the long-term performance and reliability of your Okin Refined-R motor actuator, periodic maintenance is recommended.
Consellos xerais de mantemento:
- Manter limpo: Regularly inspect the motor and surrounding areas for dust, debris, or obstructions. Gently wipe clean with a dry cloth.
- Comproba as conexións: Periodically inspect all electrical connections, especially the 2-pin plug, to ensure they are secure and free from damage.
- Lubricación: The motor is generally maintenance-free regarding internal lubrication. Do not attempt to lubricate internal components unless specifically instructed by Okin support.
- Evitar a sobrecarga: Do not exceed the recliner's weight capacity, as this can strain the motor and reduce its lifespan.
Resolución de problemas
If your recliner is not functioning correctly after motor replacement, follow these troubleshooting steps:
Problemas comúns e solucións:
- No Movement/Power:
- First, troubleshoot the recliner's switch and power supply. Ensure the recliner is properly plugged into a working electrical outlet.
- Comprobe o cable de alimentación por se hai danos visibles.
- Verify that the 2-pin plug from the motor is securely connected to the power supply.
- O motor non responde:
- Ensure the motor model matches your recliner's requirements. While this motor can replace JLDQ.14.270.114F, slight differences might exist.
- Inspect the motor's wiring for any pinches, cuts, or loose connections.
- Ruídos pouco comúns:
- Check for any obstructions around the motor or linkage mechanisms that might be causing friction or binding.
- Ensure the motor is securely mounted and not vibrating against the frame.
If these steps do not resolve the issue, it is recommended to contact Okin customer support for further assistance.
Especificacións
Detailed technical specifications for the Okin Refined-R JLDQ.14.270.114A motor actuator:
| Característica | Especificación |
|---|---|
| Modelo | JLDQ.14.270.114A (also replaces JLDQ.14.270.114F series) |
| Aparición | Negro (PA), Branco prateado (aluminio) |
| Ictus | 114 mm |
| Dimensións mínimas (contracción) | 270 mm |
| Maximum Dimension (Extend) | 384 mm |
| Carga (forza de empuxe) | 1000 N |
| Frecuencia de operación | Activado 1 min / Desactivado 8 min |
| Conexión | 2-pin plug with clip for master motor/power supply |
| Peso do elemento | 2.77 libras |
| Dimensións do paquete | 14.37 x 6.3 x 4.65 polgadas |
Figura 4: Resumo visual das especificacións clave do produto.
Garantía e Soporte
For information regarding warranty coverage or technical support, please refer to the official Okin website or contact their customer service directly. It is recommended to have your product model number (JLDQ.14.270.114A or JLDQ.14.270.114F) and purchase details available when contacting support.
Podes atopar máis información e datos de contacto visitando a Tenda Okin en Amazon.
