Manual do usuario do casete microSHIFT Acolyte serie H de 8 velocidades

1. Introdución

This manual provides essential information for the proper installation, operation, maintenance, and troubleshooting of your microSHIFT Acolyte H-Series 8-Speed Cassette. Designed for challenging terrains, this cassette offers a wide range of gears for various cycling conditions. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.

2. Produto rematadoview

The microSHIFT Acolyte H-Series 8-Speed Cassette is engineered for durability and precise shifting. It is compatible with standard HG freehub bodies and a normal 8-speed chain, making it a versatile upgrade or replacement component for your bicycle's drivetrain.

Características clave

• Carbon steel cogs are continuously forged for strength and shifting accuracy.
• Cogs are ED coated for added durability and corrosion resistance.
• Compatible with standard HG freehub bodies.
• Drivetrain Speeds: 8.
• Wide Range: 12-46 teeth.

Compoñentes

The cassette consists of multiple carbon steel cogs of varying sizes, assembled onto a carrier or individually, secured by a lockring. The specific cog combination is 12-15-18-21-24-30-37-46 teeth.

Figura 2.1: Completo view of the microSHIFT Acolyte H-Series 8-Speed Cassette. Note the lockring with '40 NM' torque specification.

3. Configuración e instalación

Proper installation is crucial for the performance and safety of your cassette. If you are unsure about any steps, consult a professional bicycle mechanic.

Ferramentas necesarias:

• Cassette Lockring Tool (compatible with HG standard)
• Chain Whip (for removing old cassette)
• Torque Wrench (recommended for lockring)
• Graxa

Pasos de instalación:

1. Remove Rear Wheel: Carefully remove the rear wheel from your bicycle frame.
2. Remove Old Cassette (if applicable): If replacing an old cassette, use the chain whip to hold the cassette steady and the lockring tool to unscrew the lockring counter-clockwise. Remove the old cassette cogs and spacers.
3. Clean Freehub Body: Thoroughly clean the freehub body on your rear wheel hub. Ensure there is no dirt, grease, or debris that could interfere with the new cassette's seating.
4. Aplicar graxa: Apply a thin layer of grease to the threads of the freehub body and the inside of the cassette lockring.
5. Install New Cassette: Carefully slide the microSHIFT Acolyte cassette onto the freehub body. Ensure the wide spline on the cassette aligns with the wide spline on the freehub body. All cogs and spacers (if any are separate) must be correctly oriented and seated.
6. Install Lockring: Thread the cassette lockring onto the freehub body by hand, turning clockwise. Once finger-tight, use the cassette lockring tool and a torque wrench to tighten the lockring to the specified torque of 40 Nm.
7. Reinstall Rear Wheel: Reinstall the rear wheel onto your bicycle frame, ensuring it is properly seated and secured.
8. Adjust Derailleur: After installation, it is highly recommended to check and adjust your rear derailleur for optimal shifting performance across all 8 speeds.

Imaxe 3.1: Primeiro plano view of the cassette cogs, showing the tooth profiles and spacing for 8-speed compatibility.

Figura 3.2: detallada view of the cassette's internal structure and assembly, highlighting the robust construction.

4. Instrucións de funcionamento

Once installed and the derailleur is adjusted, your microSHIFT Acolyte cassette is ready for use. The 12-46t range provides a wide selection of gears for various riding conditions, from steep climbs to flat sprints.

Shifting Tips:

• Anticipate Shifts: Shift gears before you encounter a steep climb or a sudden change in terrain.
• Ease Off Power: Briefly reduce pedaling pressure while shifting to allow the chain to move smoothly between cogs. This prevents excessive wear and improves shift quality.
• Avoid Cross-Chaining: Try to avoid using the largest cog with the largest chainring, or the smallest cog with the smallest chainring, as this can cause premature wear and inefficient power transfer.

5. Mantemento

Regular maintenance will extend the life of your cassette and ensure consistent performance.

Limpeza:

• After each ride, especially in wet or dirty conditions, clean your cassette.
• Use a degreaser specifically designed for bicycle drivetrains and a stiff brush to remove grime from between the cogs.
• Rinse thoroughly with water and dry completely to prevent rust.

Inspección:

• Periodically inspect the cogs for signs of wear, such as hooked teeth or thinning. Worn cogs can lead to poor shifting and chain skipping.
• Check the lockring for tightness.
• Inspect your chain for wear. A worn chain will accelerate cassette wear.

Lubricación:

• While the cassette itself does not require lubrication, ensure your bicycle chain is regularly cleaned and lubricated with appropriate chain lube. A well-lubricated chain will reduce wear on the cassette.

6 Solución de problemas

Aquí tes algúns problemas comúns e as súas posibles solucións:

7. Especificacións técnicas

8. Garantía e soporte

This microSHIFT Acolyte H-Series Cassette comes with a Garantía limitada. For detailed warranty information, terms, and conditions, please refer to the official microSHIFT website or contact your authorized microSHIFT dealer.

For technical support or further assistance, please reach out to microSHIFT customer service or your local bicycle shop.

Fabricante: microSHIFT

UPC: 657993356241