1. Introdución
This manual provides essential instructions for the safe and effective operation of your Elinchrom ONE Off-Camera Flash. Please read this manual thoroughly before using the device to ensure proper setup, usage, and maintenance. Retain this manual for future reference.
The Elinchrom ONE is a portable off-camera flash unit featuring an integrated Li-Ion battery, designed for versatile lighting applications. Its compact size and robust construction make it suitable for various photographic environments.
2. Contido do paquete
Verify that all items listed below are present in your Elinchrom ONE package:
- 1 x Elinchrom ONE Flash Head
- 1 x Cúpula de difusión
- 1 x Wall Charger and Cable
- 1 x Elinchrom ONE Case
- 1 x 5.9' USB Type-C Cable
3. Configuración
3.1 Carga inicial
Before first use, fully charge the integrated Li-Ion battery. The Elinchrom ONE features a built-in 41.04 Wh Li-Ion battery.
- Connect the provided USB Type-C cable to the flash unit's charging port.
- Connect the other end of the USB Type-C cable to the supplied 65W USB-C wall charger.
- Enchufe o cargador de parede nunha toma de corrente.
Tempos de carga:
- Fast Charge (unit ON): Approximately 60 minutes to 80%, 100 minutes to 100%.
- Slow Charge (unit OFF): Approximately 80 minutes to 80%, 135 minutes to 100%.
The unit supports Active Charging, allowing operation while connected to a power source, regardless of the battery's charge level.
3.2 Montaxe da unidade de flash
The Elinchrom ONE features a standard 5/8" receiver with dual-axis mounting for attachment to light stands or other grip equipment.
- Loosen the mounting knob on the flash unit's stand mount.
- Slide the flash unit onto the 5/8" spigot of a light stand.
- Tighten the mounting knob securely to prevent movement.
3.3 Colocación de modificadores de luz
The Elinchrom ONE is compatible with Elinchrom OCF and Profoto OCF light shapers. An included adapter allows compatibility with standard Elinchrom modifiers.
- To attach an OCF modifier, align the modifier with the flash head and twist until it locks into place.
- For standard Elinchrom modifiers, first attach the provided adapter to the flash head, then mount the modifier onto the adapter.
- The tilt head also includes an umbrella fitting (7 to 8 mm) for attaching umbrellas.
4. Instrucións de funcionamento
4.1 Encendido/apagado
To power on the Elinchrom ONE, press and hold the power button located on the control panel until the screen illuminates. To power off, press and hold the power button again until the screen shuts down.
4.2 modos de flash
The Elinchrom ONE supports the following flash modes:
- Modo manual: Permite un control preciso da potencia de saída do flash.
- Modo TTL (a través da lente): Automatically adjusts flash output for correct exposure. Requires a Skyport Transmitter Pro.
- HSS (High-Speed Sync) Mode: Enables flash synchronization at shutter speeds faster than the camera's native sync speed. Requires a Skyport Transmitter Pro.
Adjust flash power within a 5 F-stop range, from 7 to 131 Ws, using the rotary dial or touchscreen interface.
4.3 Modelado Lamp
The integrated modeling lamp is a 20W Bicolor LED with a CRI of 95, providing 3000 Lumens (equivalent to a 120W halogen lamp).
- Temperatura de cor: Adjustable presets from 2700 K to 6500 K.
- Tempo de execución: Up to 10 hours at minimum power, or 90 minutes at maximum power (modeling lamp só).
Access and adjust modeling lamp settings via the touchscreen interface.
4.4 Disparación
The Elinchrom ONE features a built-in Skyport radio receiver and Bluetooth connectivity.
- Skyport: Supports 20 channels and 4 groups. Radio range is up to 60m indoors and 200m outdoors.
- Bluetooth: Version 4.2 built-in, compatible with Elinchrom Studio Software for Windows, Mac, and iOS devices.
4.5 Xestión da batería
The integrated Li-Ion battery provides approximately 750 full-power flashes (LED lamp OFF) or 550 full-power flashes (LED lamp ON 100%) on a single charge. Refer to Section 3.1 for charging instructions.
5. Mantemento
- Limpeza: Use a soft, dry cloth to clean the exterior of the flash unit. Avoid abrasive cleaners or solvents.
- Substitución do tubo de flash: The flash tube is user-replaceable (SKU: EL24091). Refer to the detailed instructions provided with the replacement flash tube for proper installation.
- Almacenamento: Store the unit in its protective case in a cool, dry place when not in use.
6 Solución de problemas
If you encounter issues with your Elinchrom ONE, consider the following general troubleshooting steps:
- A unidade non se acende: Ensure the battery is sufficiently charged. Connect the unit to the charger and attempt to power on.
- O flash non se dispara: Verify that the flash unit is properly synchronized with your camera's trigger (e.g., Skyport Transmitter Pro). Check flash mode settings (Manual, TTL, HSS).
- Saída inconsistente: Check battery level. Ensure no obstructions are blocking the flash sensor or light output.
- Sobrequecemento: The unit features smart proactive cooling. If an overheating warning appears, allow the unit to cool down before continued use.
For persistent issues, consult the Elinchrom support websitio ou póñase en contacto co servizo de atención ao cliente.
7. Especificacións técnicas
| Característica | Especificación |
|---|---|
| Enerxía | 131 Ws |
| Rango de potencia | 5 F-Stops / 7 to 131 Ws |
| Flash Duration t0.1 (Normal Mode) | 1/1530s - 1/155s |
| Flash Duration t0.1 (Action Mode) | 1/7000s - 1/625s |
| Recycling Time (Min/Max) | 0.06 s/0.9 s |
| Modos de flash | Manual / TTL / HSS (requires Skyport Transmitter Pro) |
| Flash Color Temperature (Max Power) | 5900 K (Acción) / 5600 K (HSS) |
| Estabilidade de potencia | ± 0.5 % |
| Refrixerado por ventilador | Yes, with Smart Proactive Cooling |
| User Replaceable Flash Tube | Yes (SKU: EL24091) |
| Stand Stand | Standard 5/8" Receiver with Dual Axis Mounting |
| Modifier Mount | Elinchrom OCF, Profoto OCF, Elinchrom (via included adapter) |
| Umbrella Fitting | 7 to 8 mm on Tilt Head |
| Tipo de batería | Built-in 41.04 Wh Li-Ion |
| Modelado Lamp Tipo | 20W Bicolor LED CRI 95, 3000 Lumens |
| Modelado Lamp Temperatura da cor | Presets de 2700 K a 6500 K |
| Receptor de radio | Built-in Skyport (20 Channels, 4 Groups) |
| Gama de radio | Interior: ata 60 m / Exterior: ata 200 m |
| Bluetooth | Version 4.2 Built-in |
| Dimensións do produto | 8.86 x 3.94 x 6.5 polgadas |
| Peso do elemento | 6.25 libras |
| Número de modelo do artigo | 20932.1 |
| Montaxes compatibles | Canon, Nikon, Sony |
| Velocidade de sincronización do flash | 1/8000 seg |
8. Garantía e soporte
The Elinchrom ONE Off-Camera Flash (Model EL20932.1) typically comes with a 2-year Elinchrom USA manufacturing warranty. Please refer to your purchase documentation or the official Elinchrom websitio web para coñecer os termos e condicións específicos da garantía.
For technical support, service, or further inquiries, please visit the official Elinchrom websitio web ou póñase en contacto cos seus centros de servizo autorizados.