Lorex 4K 16-Channel NVR User Manual

1. Introdución

The Lorex 4K 16-Channel NVR (Network Video Recorder) is a sophisticated surveillance solution designed to capture and manage high-resolution video footage. This NVR supports up to 4K (8MP) resolution recording, ensuring detailed and clear video evidence. It features smart motion detection, voice control capabilities, and fusion technology for enhanced security monitoring.

Equipped with a built-in Hard Disk Drive (HDD) and supporting up to two 10TB drives, the NVR provides ample storage for 24/7 recording. Its plug-and-play Power-over-Ethernet (PoE) installation simplifies camera connections, making setup efficient. The system also supports audio recording on every channel and includes an auto-recovery feature to ensure continuous surveillance even after power interruptions.

Figura 1.1: Fronte view of the Lorex 4K 16-Channel NVR, showcasing its sleek design and front panel controls.

2. Configuración e instalación

This section guides you through the initial setup and physical installation of your Lorex NVR system. Ensure all components are present before beginning.

2.1 Desembalaxe e comprobación de compoñentes

Carefully unpack the NVR and all accessories. Verify that the following items are included:

• Lorex 4K 16-Channel NVR unit
• Adaptador de alimentación
• Mouse USB
• Cable Ethernet
• cable HDMI
• Guía de inicio rápido (se corresponde)

2.2 Conectando o NVR

Follow these steps to connect your NVR:

1. Conectar a unha pantalla: Use the provided HDMI cable to connect the NVR's HDMI output port to an HDMI input on your monitor or TV. This is essential for initial setup and direct viewing.
2. Conectar o rato USB: Plug the USB mouse into any available USB port on the NVR (front or rear).
3. Conexión de rede: Connect one end of the Ethernet cable to the NVR's LAN port and the other end to your router or network switch. This provides network access for remote viewing and updates.
4. Connect Cameras (PoE): For Lorex PoE cameras, connect them directly to the NVR's PoE ports using Ethernet cables. The NVR will provide both power and video signal through these ports, simplifying wiring. The NVR features 16 PoE ports.
5. Encendido: Conecta o adaptador de corrente á entrada de alimentación do NVR e logo conéctao a unha toma de corrente. O NVR acenderase automaticamente.

Figure 2.1: Rear panel of the NVR, illustrating the various input/output ports including HDMI, VGA, Ethernet (LAN and PoE), USB, and audio connections.

Figure 2.2: Diagram illustrating the simplicity of Power over Ethernet (PoE) connectivity, where a single Ethernet cable provides both power and data to the camera from the NVR.

3. Funcionamento

This section covers the basic operation of your Lorex NVR, including live viewing, recording, and playback.

3.1 Asistente de configuración inicial

Upon first power-on, the NVR will guide you through an initial setup wizard. This wizard typically includes:

• Selección da lingua
• Password creation for the admin account
• Configuración de data e hora
• Network configuration (DHCP is usually default)
• Hard drive initialization (if prompted)

3.2 En directo View

After completing the setup wizard, the NVR will display the live view de todas as cámaras conectadas. Podes cambiar entre unha soa cámara view, multi-camera grids, and sequence views using the on-screen controls or the USB mouse.

• Resolución 4K: O NVR admite en directo viewing in up to 4K (8MP) resolution at 30 frames per second (fps) for compatible cameras.
• Zoom dixital: Use the digital zoom feature to magnify specific areas of interest in the live view.
• Monitorización de audio: The NVR supports audio on every channel, allowing you to hear audio from cameras with built-in microphones or connected external microphones.

3.3 Gravación e reprodución

The NVR is configured for 24/7 continuous recording by default. It also supports event-based recording triggered by motion detection.

• Detección intelixente de movemento: Leverage advanced motion detection features to reduce false alerts and trigger recordings only when a person or vehicle is detected.
• Busca por área: Utilize the Area Search function to quickly locate events by pinpointing activity in specific zones during playback.
• Reprodución: Acceso gravado footage through the playback menu. You can search by date, time, and event type.
• Almacenamento: The NVR comes with a built-in 4TB HDD and supports up to two 10TB hard drives for extensive storage capacity. Storage mirroring can be configured for continuous data backup.

3.4 Remote Access (Lorex Cloud App)

The Lorex Cloud app allows you to view vivir footage, play back recordings, and receive motion push notifications on your smartphone or tablet. Download the app from your device's app store and follow the in-app instructions to add your NVR.

4. Mantemento

Proper maintenance ensures the longevity and optimal performance of your Lorex NVR system.

4.1 Coidados xerais

• Manteña o NVR nunha zona ben ventilada para evitar o sobrequecemento.
• Avoid exposing the NVR to direct sunlight, moisture, or extreme temperatures.
• Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols.

4.2 Xestión do disco duro

The NVR's hard drive will automatically overwrite the oldest footage once it reaches full capacity. No manual intervention is typically required for continuous recording.

• Capacidade: The NVR supports up to two 10TB hard drives. If you wish to expand storage, consult the Lorex support website for compatible drives and installation instructions.
• Copia de seguridade de datos: For critical footage, regularly back up important video clips to an external USB drive or network storage.

4.3 Actualizacións de firmware

Consulta periodicamente o soporte de Lorex website for firmware updates. Firmware updates can improve system performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update carefully.

4.4 Recuperación por fallo de alimentación

The NVR features auto-recovery after power failures. In the event of a power outage, the system is designed to automatically reboot and resume recording once power is restored, ensuring minimal disruption to your surveillance.

5 Solución de problemas

This section provides solutions to common issues you might encounter with your Lorex NVR.

5.1 Sen saída de vídeo na pantalla

• Comproba os cables: Ensure the HDMI or VGA cable is securely connected to both the NVR and the display. Try a different cable or display if possible.
• Entrada de pantalla: Verify that your monitor or TV is set to the correct input source (e.g., HDMI 1, VGA).
• Potencia do NVR: Confirm the NVR is powered on and its power indicator light is active.
• Compatibilidade de resolución: If the display supports lower resolutions, try connecting the NVR to a different display or consult the NVR's manual for instructions on changing output resolution (if accessible).

5.2 As cámaras non mostran

• Alimentación por Ethernet (PoE): Ensure cameras are properly connected to the NVR's PoE ports. Check if the PoE port indicator lights on the NVR are active for the connected cameras.
• Integridade do cable: Inspect Ethernet cables for any damage. Try swapping cables or ports.
• Compatibilidade: This NVR is designed for use with Lorex IP cameras. Compatibility with third-party cameras is not guaranteed.
• Camera Power Cycle: Disconnect and reconnect the camera's Ethernet cable to power cycle it.

5.3 Remoto Viewing Issues (Lorex Cloud App)

• Conexión de rede: Ensure the NVR is connected to the internet via its LAN port and your router. Verify your mobile device has a stable internet connection.
• NVR Online Status: Check the NVR's network settings to confirm it has obtained an IP address and is showing as "online" or "connected" to the Lorex Cloud service.
• Substream for Remote Viewing: For optimal performance over mobile networks or slower internet connections, the Lorex Cloud app often defaults to a lower-resolution substream. This is normal behavior to ensure smooth streaming. Full 4K resolution is typically best viewed directly from the NVR's HDMI output.
• Configuración do enrutador: Ensure your router is not blocking necessary ports for the NVR's cloud connection. Consult your router's manual or ISP for port forwarding information if needed, though Lorex Cloud usually uses P2P for simpler setup.
• Wi-Fi Extenders/Mesh Networks: Some network configurations, particularly those using Wi-Fi extenders or mesh networks that suppress broadcast packets, may interfere with the NVR's ability to communicate with cameras or the cloud service. Ensure the NVR and cameras are on the same logical network segment.

5.4 Hard Drive Not Recording

• Estado do disco duro: Check the NVR's system settings to verify the hard drive status. It should be "Normal" or "Initialized". If not, you may need to format or initialize the HDD.
• Horario de gravación: Ensure the recording schedule is properly configured for continuous or motion-triggered recording.
• HDD Fault: If the hard drive is faulty, it may need replacement. Contact Lorex support for assistance.

6. Especificacións

Detailed technical specifications for the Lorex 4K 16-Channel NVR (Model N882A64B).

7. Garantía e soporte

For warranty information, technical support, or further assistance with your Lorex NVR, please refer to the official Lorex websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde á man o recibo da compra e o número de serie do produto para un servizo máis rápido.

You can also find additional resources, FAQs, and software downloads on the Lorex support portal.

Recursos en liña:

• Lorex Oficial Websitio: www.lorex.com
• Lorex Cloud App: Available on iOS App Store and Google Play Store.