Manual de instrucións da bomba de graxa pneumática WilTec XPOtool 15L

1. Introdución

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your WilTec XPOtool 15L Pneumatic Grease Pump. This professional-grade air-powered grease pump is designed for precise lubrication of vehicles and machinery components such as hinges, joints, wheel hubs, and bearings. Its robust construction ensures reliability and longevity in workshop and industrial environments.

2. Instrucións de seguridade

WARNING: Read all safety warnings and instructions before operating this product. Failure to follow these instructions may result in serious injury.

• Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when operating the grease pump.
• Ensure the air compressor is disconnected and the pressure is relieved before performing any maintenance or assembly.
• Do not exceed the maximum operating pressure specified for the pump (6-8 bar).
• Use only lubricants compatible with the pump and the components being greased.
• Manter a zona de traballo limpa e ben iluminada. As zonas desordenadas ou escuras invitan a accidentes.
• Manteña os nenos e os espectadores afastados mentres opera a bomba.
• Never point the grease gun nozzle at yourself or others. High-pressure grease injection can cause severe injury.
• Inspect the hose and connections for damage before each use. Replace any worn or damaged parts immediately.
• Ensure the pump is stable on a level surface during operation.

3. Produto rematadoview

The WilTec XPOtool 15L Pneumatic Grease Pump is designed for efficient and precise lubrication. Key components include the grease reservoir, pneumatic pump mechanism, pressure regulator, grease hose, and grease gun.

Figura 3.1: En xeral view of the WilTec XPOtool 15L Pneumatic Grease Pump. This image shows the complete unit with the grease reservoir, pump assembly, hose, and grease gun.

3.1 Características principais

• Professional Pneumatic Operation: Designed for garage and industrial use, powered by compressed air.
• Precise Lubrication: Facilitates accurate application of lubricant to various mechanical parts.
• Alto rendemento: Achieves a flow rate of 0.85 liters per minute with an input air pressure of 6–8 bar and a pressure ratio of 50:1.
• Gran capacidade: Features a 15-16 liter lubricant storage tank, suitable for extensive use.
• Deseño móbil: Equipped with two wheels and a handle for easy transport and maneuverability.
• Dimensións compactas: Measures 91 x 40 x 39 cm, allowing for convenient storage and movement.

Figura 3.2: Dimensions of the grease pump, illustrating its compact and mobile design with a handle and wheels.

Figura 3.3: Primeiro plano view of the high-pressure grease hose and the ergonomic grease gun, designed for comfortable and efficient application.

Figura 3.4: Detail of the pressure gauge and regulator, allowing for precise control of the air input pressure for optimal grease delivery.

4. Configuración

1. Desembalaxe: Carefully remove all components from the packaging. Verify that all parts are present according to the packing list (not provided, assume standard components). Note: The wheels and castors are located inside the pressure tank for shipping.
2. Montaxe de rodas: Attach the wheels and castors to the base of the unit. Ensure they are securely fastened for stability and mobility.
3. Instalación do mango: Securely attach the handle to the main body of the pump.
4. Grease Filling:
   • Open the lid of the 15L grease reservoir.
   • Fill the reservoir with the appropriate type of grease. Ensure the grease is clean and free of contaminants.
   • Place the follower plate (if separate) on top of the grease to prevent air pockets and ensure consistent feeding.
   • Securely close the reservoir lid.
5. Hose and Gun Connection: Connect the high-pressure grease hose to the pump outlet and the grease gun to the other end of the hose. Ensure all connections are tight to prevent leaks.
6. Conexión de subministración de aire: Connect your air compressor hose to the air inlet fitting on the pump's pressure regulator. Ensure the air supply is clean and dry.

5. Instrucións de funcionamento

1. Preparar o subministro de aire: Ensure your air compressor is set to deliver between 6-8 bar (87-116 PSI) of pressure.
2. Axuste do regulador: Use the pressure regulator on the pump to fine-tune the air pressure entering the pump mechanism. Refer to Figure 3.4.
3. Prime the Pump (Initial Use):
   • With the grease gun nozzle pointed safely away from people and objects, slowly open the air supply to the pump.
   • Operate the grease gun trigger until grease begins to flow smoothly, indicating the pump is primed and air has been purged from the system.
4. Lubricación:
   • Attach the grease gun nozzle securely to the grease fitting (zerk) on the component to be lubricated.
   • Press the grease gun trigger to dispense grease. Apply grease until resistance is felt or until the specified amount for the component is reached. Avoid over-greasing.
   • Release the trigger to stop the flow of grease.
5. Despois do uso:
   • Close the air supply valve to the pump.
   • Relieve any remaining pressure in the system by briefly pressing the grease gun trigger (point safely away).
   • Disconnect the air hose from the pump.
   • Clean the grease gun and hose to prevent contamination and store the unit in a clean, dry place.

6. Mantemento

• Limpeza regular: Keep the exterior of the pump, hose, and grease gun clean. Wipe off any spilled grease immediately.
• Inspección de mangueiras e accesorios: Periodically inspect the high-pressure hose for cracks, kinks, or damage. Check all fittings for tightness and signs of leakage. Replace damaged components promptly.
• Air Filter/Lubricator: If your air supply system includes an air filter or lubricator, ensure it is regularly maintained according to its manufacturer's instructions. Clean and drain the air filter bowl as needed.
• Grease Quality: Always use high-quality, clean grease. Contaminated grease can damage the pump mechanism and the components being lubricated.
• Almacenamento: Store the grease pump in a dry, clean environment, protected from extreme temperatures and direct sunlight.

7 Solución de problemas

8. Especificacións

9. Garantía e soporte

For warranty information and technical support, please refer to the documentation included with your purchase or contact WilTec customer service directly. Keep your proof of purchase for warranty claims.

WilTec Wildanger Technik GmbH
Seller Information (Amazon.com.be)