FLEXISPOT 4 Leg Standing Desk Instruction Manual

1. Información de seguridade

Please read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury or product damage. Keep this manual for future reference.

• This desk requires assembly. Ensure all components are correctly installed before use.
• The maximum weight capacity for this desk is 220 pounds (100 kg). Do not exceed this limit.
• When adjusting the desk height, ensure there are no obstructions above or below the desk that could interfere with its movement.
• Manteña os nenos e as mascotas lonxe da mesa durante o funcionamento.
• Do not attempt to manually force the desk up or down. Use only the electric control panel.
• Ensure the power cord is properly connected and routed to prevent tripping hazards or damage.
• For optimal stability, ensure the desk is placed on a level surface.

Important Note: When using the LED control panel to adjust height, the three height keys must be pressed and held continuously until the desired height is reached.

2. Contido do paquete

Verifique que estean presentes todos os compoñentes antes de comezar a montaxe. Se falta algunha peza ou está danada, póñase en contacto co servizo de atención ao cliente.

• Desktop (71"x32" Black Top)
• Desk Frame (Black Frame)
• 4 Patas
• Panel de control
• Adaptador de alimentación e cable
• Ferraxes de montaxe (parafusos, bulóns, etc.)
• Manual de instrucións

3. Instrucións de montaxe

Assembly typically requires two people. Please follow these steps carefully. A power drill may be helpful for some steps, but is not strictly required.

1. Desempaquetar compoñentes: Retire con coidado todas as pezas da embalaxe e colóqueas sobre unha superficie limpa e suave para evitar rabuñaduras.
2. Fixar as patas á estrutura: Securely attach the four legs to the desk frame using the provided hardware. Ensure all connections are tight.
3. Install Desktop: Place the desktop upside down on a soft surface. Carefully align the assembled frame with the pre-drilled holes on the underside of the desktop. Secure the frame to the desktop using the appropriate screws.
4. Mount Control Panel: Attach the LED control panel to the underside of the desktop, typically on the front edge, using the provided screws.
5. Cables de conexión: Connect the motor cables from the legs to the control box. Connect the control panel cable to the control box. Finally, connect the power adapter to the control box and plug it into a power outlet. Ensure all cables are neatly managed to avoid interference with desk movement.
6. Configuración inicial: Once assembled, carefully flip the desk upright. Perform an initial height calibration by pressing and holding the 'Down' button until the desk reaches its lowest point, then release. The desk is now ready for operation.

Figure 3.1: Fully assembled FLEXISPOT 4 Leg Standing Desk.

Figure 3.2: Detailed dimensions of the desk, including height range and desktop size.

4. Instrucións de funcionamento

The FLEXISPOT 4 Leg Standing Desk features an intuitive LED control panel for easy height adjustments and memory settings.

4.1. Panel de control rematadoview

Figure 4.1: Digital Keypad with memory functions and up/down controls.

• Frechas arriba/abaixo (▲ / ▼): Press and hold to adjust the desk height upwards or downwards. The current height is displayed on the LED screen.
• Memory Buttons (1, 2, 3): These buttons allow you to save and recall preferred height settings.
• Memory Set Button (M): Used to program a height into a memory slot.

4.2. Axuste de altura

To adjust the desk height, press and hold the ▲ (Up) or ▼ (Down) arrow button until the desk reaches your desired position. The desk will move smoothly between 28.7 inches and 47.2 inches.

4.3. Saving Memory Presets

You can save up to three preferred height settings for quick recall:

1. Axusta o escritorio á altura desexada usando as frechas arriba/abaixo.
2. Prema o botón "M". A pantalla LED mostrará "S-".
3. Within 3 seconds, press one of the memory buttons (1, 2, or 3). The LED display will show 'S-1', 'S-2', or 'S-3' to confirm the setting has been saved.

4.4. Recalling Memory Presets

To move the desk to a saved height, press and aguantar the corresponding memory button (1, 2, or 3) until the desk reaches the programmed height.

4.5. Anti-Collision System

The desk is equipped with an anti-collision system to prevent damage. If the desk encounters an obstruction during movement, it will stop and reverse slightly. Remove the obstruction before resuming operation.

Figure 4.2: Anti-collision system in action, preventing damage from obstructions.

5. Mantemento

Regular maintenance ensures the longevity and smooth operation of your standing desk.

• Limpeza: Limpa o escritorio e o marco cun pano suave eamp pano. Evite produtos químicos agresivos ou produtos de limpeza abrasivos.
• Xestión de cables Periodically check and organize cables to prevent tangles and ensure they do not interfere with the desk's movement.
• Comprobación de fixación: Occasionally check all screws and bolts to ensure they remain tight. Retighten if necessary.
• Coidados do motor: The electric motors are maintenance-free. Do not attempt to lubricate or disassemble them.

6 Solución de problemas

Se tes problemas co teu escritorio, consulta os seguintes problemas e solucións comúns:

• O escritorio non se move:
  • Comprobe se o cable de alimentación está ben conectado tanto ao escritorio como á toma de corrente.
  • Asegúrese de que todos os cables do motor estean conectados correctamente á caixa de control.
  • Perform a reset: Press and hold the 'Down' button until the desk reaches its lowest point and slightly retracts, then release.
• Uneven Movement or Wobbling:
  • Ensure the desk is on a level surface. Adjust the leveling feet if necessary.
  • Check that all assembly screws and bolts are tightened securely.
  • Verify that the weight on the desk does not exceed the maximum capacity of 220 lbs and is evenly distributed.
• Códigos de erro na pantalla:
  • If an error code appears, try performing a reset as described above.
  • If the error persists, disconnect power for 10 minutes, then reconnect and try again.
  • Consulte co fabricante website or contact customer support with the specific error code.
• A memoria predefinida non funciona:
  • Ensure you are pressing and sostendo the memory button until the desk reaches the saved height.
  • Re-program the memory presets if they are not recalling correctly.

Se estes pasos non resolven o problema, póñase en contacto co servizo de atención ao cliente de FLEXISPOT para obter máis axuda.

7. Especificacións

8. Garantía e soporte

FLEXISPOT ofrece unha cobertura de garantía integral para a súa tranquilidade:

• 5 ano de garantía: Covers the desk frame and motor components.
• 2 ano de garantía: Covers the control panel and other electronic parts.

For warranty claims, technical support, or any questions regarding your FLEXISPOT product, please visit the official FLEXISPOT website or contact their customer service department. Please have your model number (QS2B-1880-AU) and proof of purchase available when contacting support.