GHome Smart Light Switch SW5 User Manual

1. Introdución

This manual provides comprehensive instructions for the installation, setup, and operation of your GHome Smart Light Switch SW5. This single-pole Wi-Fi smart switch allows you to control your lighting remotely via an app or voice commands through compatible smart home assistants.

Figure 1: GHome Smart Light Switch SW5 Product Overview

2. Información importante de seguridade

• Risco eléctrico: Installation requires working with high voltage. Always disconnect power at the circuit breaker before installation or servicing. If you are unsure about electrical wiring, consult a qualified electrician.
• Fío neutro necesario: This smart switch requires a neutral wire for proper operation. If your house was built or remodeled before the mid-1980s, it may not have a neutral wire. Verify your wiring before installation.
• Compatibilidade Wi-Fi: This device operates only on a 2.4GHz Wi-Fi network. It is not compatible with 5GHz Wi-Fi networks.
• Tipo de interruptor: This is a single-pole switch. It is not designed for use as a 3-way or dimmer switch.
• Compatibilidade de carga: Not compatible with smart bulbs.
• Certificacións: The GHome Smart Light Switch is UL and FCC certified, ensuring quality and safety standards.

Figure 2: Compatibility and Wiring Type Overview

3. Que hai na caixa

• GHome Smart Light Switch (2 units)
• Installation Kit (wire nuts, screws)
• Manual de usuario

4. Especificacións

Figure 3: Detailed Dimensions of the Smart Switch

5. Configuración

5.1 Instalación Eléctrica

1. Desconectar a enerxía: Before starting, turn off the power to the light switch at your circuit breaker to prevent electrical shock.
2. Eliminar o interruptor antigo: Carefully remove the existing wall plate and unscrew the old switch from the wall box.
3. Identificar os cables: Identify the following wires in your wall box:
   • Cable con tensión (viva): Normalmente negro.
   • Cable de carga: Conéctase á luminaria.
   • Fío neutro: Usually white. (Required for this switch)
   • Fío de terra: Normalmente verde ou cobre espido.
4. Conectar un novo interruptor: Connect the wires from the wall box to the corresponding wires on the GHome Smart Light Switch using the provided wire nuts.
   • Conecta o Neutral wire from the wall box to the white wire on the smart switch.
   • Conecta o En directo wire from the wall box to the black wire on the smart switch.
   • Conecta o Carga wire from the wall box to the red wire on the smart switch.
   • Conecta o Terra wire from the wall box to the green wire on the smart switch.
5. Secure Switch: Gently push the wired smart switch into the wall box and secure it with screws. Attach the new faceplate.
6. Restaurar enerxía: Turn the power back on at the circuit breaker. The indicator light on the switch should begin blinking, indicating it's ready for app pairing.

5.2 Instalación e emparellamento da aplicación

The GHome Smart Light Switch can be controlled via the GHome app. Ensure your mobile device is connected to a 2.4GHz Wi-Fi network before proceeding.

5.2.1 Download the GHome App

1. Busca "GHome" in your mobile device's app store (App Store for iOS or Google Play Store for Android).
2. Download and install the GHome app.
3. Abre a aplicación e rexístrate ou inicia sesión na túa conta.

Figure 4: GHome App Interface

5.2.2 Pairing in EZ Mode (Recommended)

1. Ensure the smart switch is powered on and the indicator light is rapidly blinking. If not, press and hold the reset button on the switch for 5 seconds until it blinks rapidly.
2. In the GHome app, tap the "+" icon on the top right corner to add a device.
3. Select "Switch (Wi-Fi)" from the device list under the Electrician category.
4. Confirm your 2.4GHz Wi-Fi network and enter its password.
5. Select "EZ Mode" (usually the default) and confirm the indicator is rapidly blinking.
6. The app will begin searching for the device. Once found, it will be added to your account.
7. You can rename the switch for easier identification.

5.2.3 Pairing in AP Mode (Alternative)

If EZ Mode fails, you can try AP Mode:

1. Ensure the smart switch is powered on and the indicator light is slowly blinking. If not, press and hold the reset button for 5 seconds until it blinks rapidly, then press and hold again for 5 seconds until it blinks slowly.
2. In the GHome app, tap the "+" icon, select "Switch (Wi-Fi)", and then choose "AP Mode" from the top right corner.
3. Confirm your 2.4GHz Wi-Fi network and enter its password.
4. Go to your phone's Wi-Fi settings (WLAN) and connect to the hotspot named "SmartLife-xxxx".
5. Return to the GHome app and wait for the device to connect.
6. You can rename the switch for easier identification.

5.2.4 Connecting with Google Home

1. Ensure your GHome Smart Light Switch is already paired with the GHome app.
2. Open the Google Home app on your phone.
3. Tap "Get Started" and sign in with your Google account.
4. Go to "Settings" and tap "Add device".
5. Use the search function to find "GHome" and select the GHome app.
6. Click "Agree and link" to link your GHome account with Google Home.
7. Select your GHome Smart Light Switch from the list of devices to add it to Google Home.

5.2.5 Connecting with Amazon Alexa

1. Ensure your GHome Smart Light Switch is already paired with the GHome app.
2. Open the Amazon Alexa app on your phone and sign in.
3. Tap "More" > "Skills & Games" > "Search" button.
4. Type "GHome" and select the GHome skill.
5. Tap "ENABLE TO USE" and then "Agree and link" to link your GHome account with Alexa.
6. Alexa will discover your device. You can then control it using voice commands.

6. Operating Your Smart Switch

6.1 Control por voz

Once connected to Alexa or Google Assistant, you can control your lights with simple voice commands:

• "Alexa, turn on [Light Name]"
• "Hey Google, turn off [Light Name]"

Figure 5: Voice Control in Action

6.2 Control remoto por aplicación

Control your lights from anywhere using the GHome app:

• View the real-time status of your lights.
• Turn lights on or off remotely.

Figure 6: Remote Control via GHome App

6.3 Schedule and Timer Functions

Automate your lighting to fit your daily routine:

• Set daily schedules for lights to turn on/off at specific times.
• Utilize sunrise/sunset automation (e.g., porch lights on 30 minutes after sunset, off 25 minutes before sunrise).

Figure 7: Scheduling and Timer Features

6.4 Control de grupo

Manage multiple smart switches simultaneously by creating groups within the GHome app.

Figure 8: Group Control Functionality

7. Mantemento

7.1 Actualizacións de firmware

GHome regularly releases firmware updates to optimize stability and user experience. It is recommended to upgrade the firmware to the latest version (e.g., V1.1.3 or newer) by following the prompts in the GHome app.

7.2 Limpeza

To clean the smart switch, ensure power is disconnected at the circuit breaker. Use a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.

8 Solución de problemas

• O interruptor non responde:
  • Comprobe se o disxuntor está activado.
  • Ensure the switch is properly wired (especially the neutral wire).
  • Verify your Wi-Fi network is 2.4GHz and stable.
  • Try resetting the switch by holding the reset button for 5 seconds.
• Non se pode conectar á wifi:
  • Confirm your router is broadcasting a 2.4GHz signal.
  • Asegúrate de que o teléfono estea conectado á rede de 2.4 GHz durante o emparellamento.
  • Achega o interruptor ao teu enrutador Wi-Fi.
  • Try both EZ Mode and AP Mode pairing methods.
  • Comproba dúas veces o contrasinal da túa wifi.
• O control por voz non funciona:
  • Ensure the GHome skill/service is enabled and linked in your Alexa or Google Home app.
  • Verify the device name in the GHome app matches the name used in voice commands.
  • Check the internet connection of your smart assistant device.

9. Garantía e soporte

9.1 Garantía

GHome Smart Light Switches typically come with a 12-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

9.2 Atención ao cliente

For further assistance or technical support, please refer to the GHome Smart official website or contact their customer service directly. Contact information can usually be found on the product packaging or the GHome Smart websitio.