Marmitek Stream T2 Pro Additional HDMI Transmitter User Manual

Produto rematadoview

The Marmitek Stream T2 Pro is an additional HDMI transmitter designed to extend the capabilities of your Marmitek Stream S2 Pro system. It enables wireless transmission of HD1080p/60 Hz video and audio signals over a range of up to 20 meters. This device supports various wireless display technologies including AirPlay, Miracast, and DLNA, allowing for flexible content sharing from compatible devices.

Image: Marmitek Stream T2 Pro HDMI Transmitter. This image shows the compact, rectangular transmitter unit with an HDMI connector on one end, a small antenna that can be folded up, and a circular button with an LED indicator on the top surface. The sides feature ventilation holes, and a micro-USB port is visible on one side.

Instrucións de configuración

Follow these steps to set up your Marmitek Stream T2 Pro transmitter:

Conexión de alimentación: Connect the Marmitek Stream T2 Pro to a power source using the provided USB cable. The device can be powered via a USB port on your display or a USB power adapter (not included).
Conexión HDMI: Plug the HDMI connector of the Stream T2 Pro into an available HDMI input port on your source device (e.g., laptop, game console, media player).
Emparejamento co receptor: Ensure your Marmitek Stream S2 Pro receiver is powered on and connected to your display. The T2 Pro transmitter should automatically attempt to pair with the S2 Pro receiver. If pairing does not occur automatically, refer to the S2 Pro receiver's manual for manual pairing instructions, which typically involve pressing a pairing button on both units.
Selección da fonte: Select the correct HDMI input on your source device to output the signal to the Stream T2 Pro.
Selección de pantalla: On your display (TV, projector), select the HDMI input connected to the Stream S2 Pro receiver.

Note: For optimal performance, ensure the transmitter and receiver are within the specified 20-meter range and have a clear line of sight, or minimal obstructions.

Operación do Dispositivo

Once the Marmitek Stream T2 Pro is successfully paired with its receiver, operation is straightforward:

Conexión automática: The transmitter will automatically send the HDMI signal from your source device to the paired receiver.
Wireless Display Modes:
- Miracast: For Windows and Android devices, enable Miracast (Wireless Display/Screen Mirroring) and select the Marmitek Stream S2 Pro receiver from the list of available devices.
- AirPlay: For Apple devices (iPhone, iPad, Mac), use the AirPlay feature to mirror your screen or stream content to the Marmitek Stream S2 Pro receiver.
- DLNA: Compatible with various devices and media servers for streaming multimedia content.
Indicador LED: The LED indicator on the transmitter provides status information (e.g., solid light for connected, blinking for searching/pairing). Refer to the S2 Pro receiver manual for specific LED patterns.

Mantemento

To ensure the longevity and optimal performance of your Marmitek Stream T2 Pro, follow these simple maintenance guidelines:

Limpeza: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners, aerosols, or abrasive materials.
Almacenamento: Cando non o use durante períodos prolongados, garde o dispositivo nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
Ventilación: Asegúrate de que os orificios de ventilación do dispositivo non estean bloqueados para evitar o sobrequecemento.
Manexo: Manexa o dispositivo con coidado. Evita deixalo caer ou someterlo a impactos fortes.

Resolución de problemas

If you encounter issues with your Marmitek Stream T2 Pro, consult the following common troubleshooting steps:

Problema	Causa posible	Solución
Sen sinal na pantalla.	Incorrect HDMI input selected on source or display. Transmisor sen alimentación. Not paired with receiver. Out of range or obstructions.	Verify HDMI input selection on both source and display. Ensure the transmitter is properly powered via USB. Perform pairing procedure as per S2 Pro manual. Reduce distance between transmitter and receiver, remove obstructions.
Sinal intermitente ou de mala calidade.	Interferencias doutros dispositivos sen fíos. Weak signal due to distance or obstructions. Source device resolution incompatibility.	Move the device away from other wireless devices (e.g., Wi-Fi routers, cordless phones). Asegúrate de ter unha liña de visión clara e reduce a distancia. Check if source device resolution is supported (up to 1080p/60Hz).
Cannot connect via AirPlay/Miracast.	Device not on the same network (for AirPlay/DLNA). Feature not enabled on source device.	Ensure both the source device and the Stream S2 Pro receiver are connected to the same Wi-Fi network. Enable screen mirroring/wireless display feature on your source device.

Especificacións técnicas

Característica	Detalle
Marca	Marmitek
Número de modelo	8392
Tipo de produto	Additional HDMI Transmitter
resolución máxima	HD1080p/60 Hz
distancia wireless	Ata 20 metros
Tecnoloxía de conectividade	USB, HDMI
Tipo de conector	HDMI
Comunicación sen fíos	Miracast, AirPlay, DLNA
Características especiais	Portátil
Dispositivos compatibles	Laptops, various source devices with HDMI output
Peso do elemento	200 gramos
Potencia de saída	5 vatios
Servizos de Internet compatibles	Browser, Netflix (Note: Functionality depends on paired receiver and source device capabilities.)

Garantía e Soporte

Specific warranty information for the Marmitek Stream T2 Pro is not available in the provided product details. Please refer to the official Marmitek websitio web ou na documentación da súa compra para obter termos e condicións detallados da garantía.

For technical support, product registration, or further inquiries, please visit the official Marmitek support page or contact their customer service directly. Contact information can typically be found on the manufacturer's websitio web ou na embalaxe orixinal do produto.

Marmitek 8392