Introdución
This manual provides detailed instructions for the installation, operation, and maintenance of your Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier. This system is designed to deliver high-fidelity audio for various indoor environments, including home theaters, bathrooms, living rooms, kitchens, and offices. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Contido do paquete
Verifique que todos os elementos que se indican a continuación estean incluídos no seu paquete:
- 1x Wall Mount Bluetooth Ampmáis vivo
- 1x Adaptador AC
- 2x Parafusos
- 2x 6.5-inch In-Ceiling Speakers
- 2x Speaker Wires
- 2x User Manuals (one for amplifier, one for speakers)
Configuración
This section guides you through the physical installation and wiring of your Herdio ceiling speaker system.
1. AmpInstalación de lifier
O interior da parede amplifier is designed for flush mounting in a standard wall plate size. Ensure you have appropriate wiring access before proceeding.
- Prepara o muro: Use the provided template (if applicable) to mark and cut an opening in the wall for the ampmáis vivo.
- Conectar o cable de alimentación: Connect the 12V DC power cable to the designated two-pin connector on the back of the ampmódulo lifier.
- Conectar o cable de audio: Connect the audio cable to the three-pin connector on the back of the ampmódulo lifier.
- Seguro Ampmáis vivo: Insira o amplifier module into the wall opening and secure it using the provided screws.
- Fixar a placa frontal: Place the decorative faceplate over the installed amplifier and secure it.
2. Instalación de altofalantes
The ceiling speakers are designed for flush mounting. Ensure you have appropriate ceiling space and wiring access.
- Mark Cutout: Use the provided cutout template to mark the desired location for each speaker in the ceiling.
- Abertura de corte: Carefully cut the circular opening in the ceiling according to the marked template. The cutout diameter is approximately 8.07 inches (20.5 cm).
- Eliminar reixa: Gently remove the magnetic grille from the front of each speaker.
- Conecte os cables dos altofalantes: Connect the speaker wires to the spring-loaded terminals on the back of each speaker. Ensure correct polarity: red wire to positive (+) terminal, black wire to negative (-) terminal.
- Inserir altofalante: Insert the speaker into the ceiling opening. The mounting clamps will automatically engage.
- Apretar Clamps: Use a screwdriver to tighten the screws on the front baffle of the speaker. This will rotate the mounting clamps and secure the speaker firmly in place.
- Replace Grille: Reattach the magnetic grille to the speaker.
3. Diagrama de cableado
Connect the speaker wires from the ceiling speakers to the amplifier terminals. Ensure correct polarity for both speakers (red to +, black to -).
4. Conexión de alimentación
Connect the AC adapter to a standard 120V power outlet and then plug the DC end into the amplifier's power input. The power LED on the amplifier will illuminate.
Video: This video demonstrates the unboxing, wiring, Bluetooth pairing, and installation process for the Herdio 6.5-inch Bluetooth Ceiling Speakers Set.
Instrucións de funcionamento
Learn how to use your Herdio ceiling speaker system.
1. Acendido/apagado e control de volume
Turn the knob on the amplifier clockwise to power on the unit and increase the volume. Turn it counter-clockwise to decrease volume and power off. You will hear an audible drop sound when powering on.
2. Emparellamento Bluetooth
After powering on, the blue Bluetooth indicator light will flash, indicating it is in pairing mode. On your smart device (phone, tablet, etc.), search for available Bluetooth devices and select 'Herdio'. Once connected, the blue light will remain solid.
3. Selección de entrada
Use the input selection switch on the amplifier to choose between Bluetooth (BT), Auxiliary (AUX), or Microphone (MIC) input modes.
4. USB Functionality
The USB port functions as a flash memory reader for media playback and also provides a charging port for your devices (5V/1A).
5. Entrada de micrófono
Connect a microphone to the 1/4-inch MIC IN jack for paging or voice applications.
Mantemento
To ensure the longevity and optimal performance of your Herdio ceiling speakers and amplifer, siga estas pautas de mantemento:
- Limpeza: Use un pano suave e seco para limpar amplifier faceplate and speaker grilles. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- Eliminación de po: Periodically use a soft brush or a low-power vacuum with a brush attachment to gently remove dust from the speaker grilles.
- Condicións ambientais: Ensure the speakers and amplifier are installed in environments free from excessive moisture, extreme temperatures, and direct sunlight. The product is not waterproof.
- Inspección de cableado: Periodically check all wiring connections to ensure they are secure and free from corrosion or damage.
Resolución de problemas
If you encounter issues with your Herdio ceiling speaker system, refer to the following common problems and solutions:
- Sen enerxía:
- Ensure the AC adapter is securely plugged into a working power outlet and the amplifier's DC input.
- Check if the power knob on the amplifier is turned clockwise to the 'ON' position.
- Verifica que a toma de corrente funciona conectando outro dispositivo.
- Sen son dos altofalantes:
- Confirm that the speaker wires are correctly connected to both the speakers and the amplifier, observing proper polarity (+ to +, - to -).
- Ensure the volume knob on the ampo lifier está enriba.
- Check the input selection switch on the amplifier to ensure the correct source (BT, AUX, MIC) is selected.
- If using Bluetooth, ensure your device is paired and playing audio.
- If using AUX or MIC, ensure the external device is connected and functioning correctly.
- Problemas de conexión Bluetooth:
- Asegurar o amplifier is in Bluetooth pairing mode (blue light flashing).
- Make sure your Bluetooth device is within the 30+ feet wireless range.
- Forget the 'Herdio' device from your smart device's Bluetooth settings and attempt to re-pair.
- Reinicie ambos os amplificador e o teu dispositivo Bluetooth.
- Son distorsionado:
- Reduce o volume en ambos os dous amplifier and your audio source device.
- Check speaker wire connections for any loose strands or short circuits.
- Ensure the audio source is not overdriven or producing distorted signals.
Especificacións
| Marca | Herdio |
| Nome do modelo | HCS 818 |
| Tipo de altofalante | Woofer, tweeter |
| Tamaño do altofalante | 6.5 polgadas |
| Potencia de saída máxima do altofalante | 320 vatios |
| Impedancia | 8 ohmios |
| Resposta en frecuencia | 20 KHz (Note: This is likely the upper limit, typical range is broader) |
| Tecnoloxía de conectividade | Auxiliar, Bluetooth, USB |
| Tecnoloxía de comunicación sen fíos | Bluetooth |
| Alcance Bluetooth | 30 pés |
| Vol. De entradatage | 120 voltios |
| Fonte de enerxía | Eléctrico con cable |
| Tipo de montaxe | Flush Mount, Ceiling Mount |
| Dimensións do produto (Ampmáis vivo) | 9.25"D x 9.25"W x 4.13"H (Note: This dimension seems to be for the speaker, not the ampmáis vivo. Amplifier is typically smaller, as shown in images.) |
| Material | Acrilonitrilo Butadieno Estireno (ABS) |
| É Impermeable | FALSO (Non resistente á auga) |
| Peso do elemento | 9.08 libras (peso total do paquete) |
Información da garantía
The Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Ampo lifier vén con a Garantía limitada. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included in your package or contact Herdio customer support directly.
Apoio
For further assistance, technical support, or inquiries regarding your Herdio product, please visit the official Herdio website or contact their customer service department. Contact information can typically be found on the product packaging or on the Herdio websitio.
