Introdución
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Reloop RP-7000 MK2 Professional Upper Torque Turntable System. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.
Instrucións de seguridade
- Ensure the turntable is placed on a stable, level surface away from direct sunlight, heat sources, and excessive moisture.
- Non expoña a unidade á choiva nin á humidade para evitar incendios ou descargas eléctricas.
- Always disconnect the power cord from the outlet before cleaning or performing any maintenance.
- Non intente realizar o mantemento da unidade vostede mesmo. Encomende calquera mantemento a persoal de servizo cualificado.
- Manter fóra do alcance dos nenos.
Contido do paquete
Your Reloop RP-7000 MK2 Professional Upper Torque Turntable System package should include the following items:
- 2 x Reloop RP-7000 MK2 Professional Upper Torque Turntable System
- 2 x Reloop Dust Cover for RP-7000/8000
- Knox Gear Vinyl Record Care System (includes brush, velvet cleaner, stylus brush, and cleaning solution)
- Cables de alimentación
- Cables RCA
- Contrapesos
- Slipmats
- Manual de usuario
Image: The complete bundle including two Reloop RP-7000 MK2 turntables, two dust covers, and the Knox Gear vinyl record care solution.
Configuración
1. Desembalaxe e colocación
Carefully remove all components from the packaging. Place the turntable on a flat, stable surface. Ensure there is adequate space around the unit for ventilation and cable connections.
Imaxe: Un ángulo view of the Reloop RP-7000 MK2 turntable, highlighting its main components.
2. Attaching the Dust Cover
Gently place the dust cover onto the turntable. The dust cover helps protect the platter and tonearm from dust and debris when the turntable is not in use.
Image: The Reloop RP-7000 MK2 turntable with its protective dust cover in place.
3. Conexión dos cables de son
Connect the RCA cables from the turntable's output to the appropriate input on your mixer or amplifier. Ensure the ground wire is also connected to prevent hum.
Image: Rear panel of the Reloop RP-7000 MK2, displaying the RCA audio outputs, ground terminal, and power connection.
4. Conexión de alimentación
Connect the power cable to the turntable and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting.
Instrucións de funcionamento
1. Acendido e apagado
To power on the turntable, flip the power switch located on the front left side to the ON position. To power off, flip the switch back to OFF.
Imaxe: Cenital view of the Reloop RP-7000 MK2 turntable, illustrating the arrangement of its controls and components.
2. Reproducir un disco
- Coloca un disco no prato.
- Select the appropriate speed (33, 45, or 78 RPM) using the speed buttons.
- Preme o INICIAR/PARAR button to begin platter rotation.
- Carefully lower the tonearm onto the record using the cue lever.
Image: The Reloop RP-7000 MK2 turntable with a record playing, demonstrating the tonearm's position.
3. Pitch Control and Reverse Function
Use the pitch fader to adjust the playback speed. The REVERSO button allows for reverse playback of the record.
Mantemento
1. Cleaning the Turntable
Regularly wipe the turntable's surface with a soft, dry cloth. For the dust cover, use a slightly damp cloth and avoid abrasive cleaners. The included Knox Gear Vinyl Record Care System can be used for cleaning records and the stylus.
Image: The Knox Gear Vinyl Record Care System, showing the velvet record brush, stylus brush, and cleaning solution bottle.
2. Coidado do punteiro
Gently clean the stylus using the provided stylus brush. Always brush from back to front. A dirty stylus can degrade sound quality and damage records.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Sen poder | Cable de alimentación non conectado; Toma de corrente avariada | Comprobe a conexión do cable de alimentación; probe cunha toma de corrente diferente |
| Sen son | RCA cables not connected; Amplifier/mixer input incorrect; Stylus damaged | Check RCA connections; Select correct input on amplifier/mixer; Inspect and replace stylus if necessary |
| Ruído de zumbido | Cable de terra non conectado; Interferencia | Ensure ground wire is securely connected; Move turntable away from other electronic devices |
| Velocidade de reprodución incorrecta | Wrong speed selected; Pitch fader not centered | Select correct RPM; Adjust pitch fader to center position |
Especificacións
- Marca: Reloop
- Modelo: RP-7000 MK2
- Tecnoloxía de conectividade: Con cable
- Características especiais: Balanced S-shaped Tone Arm, Dual Start/Stop Buttons, Precise Motor Control, Reverse Function, Freely Movable Aluminum LED Target Light
- Material: Plástico
- Peso do artigo: 4.5 Kilograms (per turntable)
- Cor: Deep black or classic silver metallic
- Dispositivos compatibles: Altofalante, auriculares
Garantía e Soporte
Reloop products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the official Reloop websitio web ou póñase en contacto co seu distribuidor local. Garde o comprobante de compra para reclamacións de garantía.
Para obter máis asistencia, visite o Reloop Store on Amazon.
