Manual do usuario da cámara IP POE Risco Vupoint

1. Introdución

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Risco Vupoint POE IP Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

Produto rematadoview

The Risco Vupoint POE IP Camera is a high-resolution surveillance camera designed for robust security applications. It features Power over Ethernet (PoE) for simplified installation, a 4 Megapixel sensor for clear imaging, and advanced night vision capabilities.

Figure 1: Risco Vupoint POE IP Camera. This image shows a white cylindrical camera with a black lens housing and a circular mounting base. The 'RISCO' logo is visible on the side of the camera body.

Contido do paquete

Verifica que todos os compoñentes estean presentes no paquete:

• 1 x Risco Vupoint POE IP Camera (Model: RVCM52P2200A)
• Ferraxes de montaxe (parafusos, ancoraxes)
• Guía de inicio rápido

2. Información de seguridade

Observe as seguintes precaucións de seguridade para evitar danos ao produto ou lesións a vostede mesmo:

• Ensure the power source meets the camera's requirements (PoE).
• Do not expose the camera to extreme temperatures or humidity beyond its IP67 rating.
• Avoid direct exposure of the lens to strong light sources.
• Non intente desmontar nin modificar a cámara. Encargue calquera mantemento a persoal cualificado.
• Install the camera securely to prevent it from falling.

3. Configuración e instalación

Instalación física

The Risco Vupoint POE IP Camera is designed for wall or ceiling mounting. Ensure the mounting surface is strong enough to support the camera's weight (approximately 1.06 kg / 2.34 lbs).

1. Choose a suitable location that provides the desired field of view and is within range of your network cable.
2. Use the provided mounting template (if applicable) to mark drill holes on the wall or ceiling.
3. Fai buratos e coloca ancoraxes de parede se é necesario.
4. Secure the camera's mounting base to the surface using the provided screws.
5. Adjust the camera's angle for optimal coverage.

Conexión de rede (PoE)

This camera supports Power over Ethernet (PoE), simplifying wiring by delivering both power and data over a single Ethernet cable.

1. Conecta un extremo dun cable Ethernet ao porto RJ45 da cámara.
2. Connect the other end of the Ethernet cable to a PoE-enabled switch or PoE injector.
3. Ensure your network is configured to provide IP addresses via DHCP or assign a static IP address to the camera if required by your system.

Configuración inicial

The camera is designed for Plug and Play installation with Risco systems. For integration with Risco Cloud™, Agility™ v3.59+, LightSYS™ v2.52+, or ProSYS™ Plus systems, follow the specific integration steps provided by Risco for your security panel.

• Risco NVR/License Requirement: Connection is mandatory via a Risco NVR, or a specific license may be required for full functionality and cloud connectivity.
• Compatibilidade ONVIF: The camera supports ONVIF protocol for integration with compatible third-party NVRs or video management systems. Refer to your NVR's manual for ONVIF device discovery and addition.
• Ranura para tarxetas SD: Insert a compatible microSD card (not included) into the camera's SD card slot for local storage of video recordings.

4. Funcionamento da cámara

En directo View e Gravación

Access the live video feed and manage recordings through your connected Risco security system's interface (e.g., Risco Cloud, NVR) or a compatible ONVIF client.

• Resolución: The camera provides a 4 Megapixel effective video resolution. Recording resolution may be set to 1080p depending on system configuration.
• Visión nocturna: The camera features advanced night vision with a range of up to 50 meters, automatically activating in low-light conditions.
• Detección de movemento: Configure motion detection zones and sensitivity settings via your connected system for event-triggered recording and alerts.

Conectividade na nube

For remote access and cloud-based features, ensure your camera is properly linked to your Risco Cloud account via a compatible Risco NVR or security panel.

5. Mantemento

Limpeza

To maintain optimal image quality, periodically clean the camera lens and housing.

• Use un pano suave e seco para limpar o corpo da cámara.
• For the lens, use a lens cleaning cloth and a specialized lens cleaning solution. Do not use abrasive cleaners.

Actualizacións de firmware

Periodically check for firmware updates through your Risco system or Risco's official websitio. As actualizacións do firmware poden mellorar o rendemento, engadir novas funcións e mellorar a seguridade.

6 Solución de problemas

If you encounter issues with your Risco Vupoint POE IP Camera, refer to the following common problems and solutions:

7. Especificacións

8. Garantía e soporte

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Risco websitio. Garda o comprobante de compra para reclamacións de garantía.

Risco Official Websitio: www.riscogroup.com