1. Introdución
This manual provides essential information for the proper setup, operation, and maintenance of your Focal Aria K2 936 floorstanding loudspeaker. Please read these instructions carefully before using your speaker to ensure optimal performance and longevity.
The Focal Aria K2 936 is a high-fidelity 3-way bass-reflex floorstanding loudspeaker, featuring Focal's renowned K2 Power cone technology and an Ash Grey premium finish. It is designed for critical music listening in a dedicated home environment.
Image: Focal Aria K2 936 floorstanding speaker with its protective grille installed, viewed dende un ángulo.
2. Instrucións de seguridade
To prevent damage and ensure safe operation, observe the following precautions:
- Colocación: Position speakers on a stable, level surface. Avoid placing them near heat sources, direct sunlight, or in areas with high humidity. Ensure adequate ventilation around the speaker.
- Potencia: Connect speakers only to amplifiers within the recommended power range (50 - 300W). Overpowering can cause damage.
- Cables: Use high-quality speaker cables and ensure correct polarity (+ to + and - to -) for all connections.
- Limpeza: Disconnect from power before cleaning. Use a soft, dry cloth. Avoid liquid cleaners or abrasive materials.
- Ventilación: Do not block the bass-reflex ports or any ventilation openings.
- Servizo: Do not attempt to service the speaker yourself. Refer all servicing to qualified personnel.
3. Contido do paquete
Carefully unpack your Focal Aria K2 936 speaker and verify that all components are present:
- Focal Aria K2 936 Floorstanding Loudspeaker (1 unit)
- Rejilla protectora
- Placa base
- Adjustable Spikes (with spanner)
- Manual de usuario (este documento)
Se falta ou está danado algún elemento, póñase en contacto co seu distribuidor inmediatamente.
4. Configuración
4.1 Desembalaxe e instalación da base
- Retire con coidado o altofalante da súa embalaxe.
- Attach the provided base plate to the bottom of the speaker using the supplied screws. Ensure it is securely fastened.
- Screw the adjustable spikes into the base plate. These spikes help decouple the speaker from the floor, improving sound clarity. Use the spanner to adjust their height for stability and level positioning.
4.2 Colocación de altofalantes
Optimal speaker placement is crucial for sound quality. Consider the following:
- Imaxe estéreo: For a stereo setup, place the speakers equidistant from your primary listening position, forming an equilateral triangle.
- Distancia desde Walls: Avoid placing speakers too close to walls, as this can exaggerate bass frequencies. Experiment with distances to find the best balance.
- Toe-in: Incline lixeiramente os altofalantes cara a dentro, en dirección á posición de escoita (converxencia) para optimizar os sonstage.
Image: Diagram illustrating the height (45.25"), depth (14.62"), and width (11.56") of the Focal Aria K2 936 speaker.
4.3 Conexión a un Ampmáis vivo
The Aria K2 936 features high-quality binding posts for ampconexión de lifier.
- Asegura o teu ampO adaptador estea apagado antes de facer calquera conexión.
- Connect the positive (+) terminal (red) of the speaker to the positive (+) terminal of the corresponding ampcanle lifier.
- Connect the negative (-) terminal (black) of the speaker to the negative (-) terminal of the corresponding ampcanle lifier.
- Asegúrate de que todas as conexións estean ben axustadas e seguras para evitar perdas de sinal ou curtocircuítos.
Imaxe: Traseira view of the Focal Aria K2 936 speaker, highlighting the input terminals for ampconexión de lifier.
5. Instrucións de funcionamento
5.1 Encendido inicial
Once all connections are made, you can power on your amplifier. Start with the volume at its lowest setting and gradually increase it to a comfortable listening level.
5.2 Período de rodaxe
Your Focal Aria K2 936 speakers require a break-in period to reach their full sonic potential. This typically involves 20-30 hours of playback at moderate volume. During this time, the drivers will loosen up, and the sound quality will improve, particularly in the bass and midrange.
5.3 AmpCoincidencia de vidadores
The Aria K2 936 has an impedance of 8 ohms and a recommended input power range of 50 - 300W. Ensure your amplifier's output power falls within this range to prevent damage to either the amplifier or the speakers and to achieve optimal sound reproduction.
6. Mantemento
Regular maintenance will keep your speakers looking and sounding their best:
- Limpeza de armarios: Use a soft, dry, lint-free cloth to wipe down the cabinet. For stubborn marks on the Ash Grey finish or leather-effect front panel, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid harsh chemicals.
- Atención ao condutor: The K2 cones are durable but should not be touched directly. If dust accumulates, use a soft brush or compressed air from a distance.
- Limpeza da reixa: The magnetic cloth frame grille can be gently vacuumed or brushed to remove dust.
7 Solución de problemas
If you encounter issues with your speakers, consult this section before contacting support:
- Sen son:
- Comprobe todas as conexións de cable entre o amplifier and speakers. Ensure they are secure and correctly polarized.
- Verifica o ampO adaptador está acendido e a fonte de entrada correcta está seleccionada.
- Test with another audio source or ampvitalizador se é posible.
- Son distorsionado:
- Reduce the volume. Overdriving the speakers or amplifier can cause distortion.
- Check speaker cable integrity for any fraying or damage.
- Asegurar o amplifier's output power matches the speaker's recommended range.
- Imbalanced Sound (one speaker louder/quieter):
- Check individual speaker connections for looseness or incorrect polarity.
- Verifica ampconfiguración do equilibrio do lifter.
- Swap speaker cables at the amplifier to determine if the issue follows the speaker or the ampcanle lifier.
- Humming or Buzzing:
- Asegúrese de que todos os compoñentes estean debidamente conectados á terra.
- Move speaker cables away from power cables or other electrical interference sources.
- Test different power outlets.
8. Especificacións
Detailed technical specifications for the Focal Aria K2 936 floorstanding loudspeaker:
| Característica | Especificación |
|---|---|
| Tipo de montaxe | Piso de pé |
| Tipo de altofalante | Altavoz bass-reflex de 3 vías |
| Controladores de altofalantes | 3 x 6.5" (16.5cm) K2 woofer, 6.5" (16.5cm) K2 midrange, 1" (25mm) Al/Mg TNF inverted dome tweeter |
| Resposta en frecuencia | 39 Hz - 28 kHz |
| Rango de potencia de entrada | 50 - 300 W |
| Impedancia | 8 ohmios |
| Sensibilidade (2.83 V/1 m) | 92 dB |
| Frecuencia cruzada | 260Hz / 3,100Hz |
| Material | MDF, Aramid Fibers, Aluminium/Magnesium, K2 |
| Cor | Cinza Gris |
| Dimensións do produto (H x W x D) | 124 x 47.5 x 31 cm (48.82" x 18.7" x 12.2") |
| Peso do elemento | 64 libras (29 kg) |
| Características especiais | K2 Power cone, Ash Grey Premium Finish, Leather Effect Front Panel |
Image: Detailed product data sheet for the Focal Aria K2 936, outlining key features and technical specifications.
9. Garantía e soporte
Focal products are designed and manufactured to the highest standards. Your Focal Aria K2 936 speaker comes with a limited warranty against defects in materials and workmanship.
For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Focal website. For technical support, troubleshooting assistance, or service inquiries, please contact your authorized Focal dealer or Focal customer service directly.
Información de contacto:
- Refer to your purchase documentation for dealer contact.
- Visit the official Focal website for global support contacts.
