Dermum S2 Model Keyless Entry Fingerprint Digital Smart Lock Instruction Manual

1. Introdución

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your Dermum S2 Model Keyless Entry Fingerprint Digital Smart Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

2. Información de seguridade

• Non intentes desmontar nin reparar a fechadura ti mesmo. Isto podería anular a garantía e causar danos.
• Use only specified AA batteries. Do not mix old and new batteries or different types of batteries.
• Ensure the door is properly aligned and the lock operates smoothly before relying on it for security.
• Garda as chaves físicas nun lugar seguro lonxe da fechadura.
• Protect your passcodes and fingerprints from unauthorized access.
• This lock is weather resistant, not waterproof. Avoid direct exposure to heavy rain or submersion.

3. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• Dermum S2 Model Smart Lock (Exterior and Interior Assemblies)
• Mounting Hardware (Screws, Spindle)
• Strike Plate and Reinforcement
• Chaves (2)
• Chaves físicas (2)
• Modelo de instalación
• Manual de usuario

4. Especificacións

5. Guía de instalación

This smart lock is designed for easy installation with a screwdriver. Follow these steps carefully.

5.1. Comprobación de compatibilidade

Asegúrate de que a túa porta cumpra as seguintes especificacións:

• Diámetro do burato: 2 1/8 polgadas (54 mm)
• Retroceso do burato: 2 3/8 inches or 2 3/4 inches (60mm or 70mm)
• Espesor da porta: 1 3/8 inches to 2 1/4 inches (35-55mm)

Image: Door compatibility diagram for Dermum S2 Model Smart Lock. This diagram illustrates the required bore hole diameter, backset, and door thickness for proper installation.

Importante: If your existing deadbolt overlaps with the long handle of the new lock, you may need to move the deadbolt to the bottom hole and install the smart lock on top. Refer to the compatibility image for visual guidance.

5.2. Instalación paso a paso

1. Prepara a porta: Remove your existing lock. Use the provided template to mark and drill any necessary holes if your door is not pre-drilled to standard specifications.
2. Instalar o pestillo: Insira o pestillo no bordo da porta. Asegúrese de que o pestillo estea orientado na dirección correcta (bordo biselado cara ao marco da porta). Asegúreo con parafusos.
3. Instalar o conxunto exterior: Feed the cable and spindle through the bore hole. Align the exterior assembly with the latch and secure it to the door.
4. Instalar a placa de montaxe interior: Attach the interior mounting plate to the exterior assembly using screws, ensuring the cable passes through the plate.
5. Conecte o cable: Conecte o cable do conxunto exterior ao conxunto interior.
6. Instalación do conxunto interior: Mount the interior assembly onto the mounting plate, ensuring the spindle engages with the handle. Secure with screws.
7. Instalar baterías: Abra a tapa das pilas no interior e insira 4 pilas AA (non incluídas), respectando a polaridade.
8. Proba de funcionamento: Test the handle and latch mechanism manually to ensure smooth operation.

6. Configuración inicial e emparellamento de aplicacións

To unlock the full potential of your Dermum Smart Lock, download the companion app and complete the initial setup.

1. Descarga a aplicación: Busca "Dermum Smart" or "TTLock" in your smartphone's app store (iOS or Android).
2. Crear unha conta: Sigue as instrucións da aplicación para crear unha nova conta de usuario.
3. Add Your Lock:
   • Activa o Bluetooth no teu smartphone.
   • In the app, tap "Add Lock" or the "+" icon.
   • Touch the keypad of your smart lock to wake it up.
   • Select your lock from the list of nearby devices in the app.
   • Follow the prompts to name your lock and complete the pairing process.
4. Rexistrar impresións dixitais:
   • In the app, navigate to "Fingerprints" or "Users".
   • Tap "Add Fingerprint" and follow the on-screen instructions to register your fingerprint by placing your finger on the sensor multiple times.
5. Set Up Passcodes:
   • In the app, go to "Passcodes".
   • You can generate various types of passcodes: permanent, timed, one-time, or recurring.
   • Follow the prompts to create and manage your desired passcodes.
6. Register Key Fobs:
   • In the app, go to "Cards" or "Fobs".
   • Tap "Add Card" and then present the key fob to the keypad when prompted.

Image: The Dermum S2 Model Smart Lock shown alongside its companion smartphone application, illustrating the digital interface for managing lock functions.

7. Instrucións de funcionamento

7.1. Abrir a porta

• Desbloqueo de impresión dixital: Coloca o dedo rexistrado no sensor de impresión dixital. O bloqueo desbloquearase se se recoñece a impresión dixital.
• Desbloqueo por contrasinal: Touch the keypad to activate it. Enter your 6-8 digit passcode followed by the '#' key. The lock will unlock if the passcode is correct.
• Key Fob Unlock: Present a registered key fob to the keypad. The lock will unlock automatically.
• Desbloqueo da aplicación: Open the app on your smartphone, ensure Bluetooth is enabled, and tap the unlock icon for your specific lock.
• Desbloqueo da chave física: Insert the physical key into the keyhole located at the bottom of the exterior handle and turn to unlock.

Images: Demonstrations of fingerprint, passcode, and key fob unlocking methods for the Dermum S2 Smart Lock.

7.2. Pechar a porta con chave

• Bloqueo automático: The lock will automatically lock after a set period (configurable in the app) once the door is closed.
• Bloqueo dun só toque: Prema e manteña premida a tecla "#" no teclado numérico durante 2 segundos para pechar a porta manualmente.
• Bloqueo de aplicacións: Open the app on your smartphone and tap the lock icon.

Image: Visual representation of the auto-lock mechanism engaging on the Dermum S2 Smart Lock.

8. Funcións avanzadas

8.1. Acceso remoto e monitorización

With the smart app, you can receive real-time unlocking notifications, view access logs, and check the lock status from anywhere. A web portal is also available for desktop management.

Images: App notifications for unlocking, remote unlock feature, and desktop web portal for access log management.

8.2. Security and Anti-Theft Features

• Modo de privacidade: Activate privacy mode from the interior assembly to prevent unlocking from the exterior keypad or app.
• Contrasinal anti-peeping: Introduce díxitos aleatorios antes ou despois do teu código de acceso real para evitar que outras persoas o adiviñen.
• Anti-Theft Alarms: The lock features alarms for forced entry attempts or multiple incorrect passcode entries. Alerts are sent to the smart app.

Images: Visuals demonstrating the privacy mode and anti-theft alarm features of the smart lock.

8.3. Voice Control (Gateway Required)

The Dermum S2 Model Smart Lock supports voice control with Amazon Alexa and Google Assistant. A Dermum Gateway is required and sold separately for this functionality.

• Once the gateway is set up and linked to your smart home assistant, you can use voice commands such as:
• "Alexa, lock the front door."
• "Hey Google, unlock the front door."
• "Alexa, check the status of the front door lock."

Image: A user interacting with a smart speaker to control the Dermum S2 Smart Lock via voice commands.

9. Mantemento

• Substitución da batería: The lock will provide low battery warnings through the app and audible alerts. Replace all 4 AA batteries promptly. Use high-quality alkaline batteries for optimal performance.
• Limpeza: Wipe the keypad and handle with a soft, damp pano. Evite produtos de limpeza abrasivos ou solventes que poidan danar o acabado ou os compoñentes electrónicos.
• Lubricación: Periodically check the latch mechanism for smooth operation. If needed, apply a small amount of graphite lubricant to the latch bolt.

10 Solución de problemas

11. Garantía e atención ao cliente

Dermum products are designed for reliability and performance. For warranty information, technical assistance, or customer support, please refer to the contact information provided on the product packaging or the official Dermum websitio.

Conserve o comprobante de compra para reclamacións de garantía.

12. Produto rematadoview Vídeos