Introdución
This manual provides detailed instructions for the safe and effective operation of your Godox Ving V860III TTL Li-Ion Flash for Sony cameras. Please read this manual thoroughly before use to ensure proper function and to prevent damage to the product or injury to yourself.
Que está incluído
Carefully unpack the box and ensure all items listed below are present and in good condition. If any items are missing or damaged, contact your retailer immediately.
Image: All components included in the Godox V860III flash kit, neatly arranged.
- V860III Flash Unit
- Batería de ións de litio VB26
- Cargador de batería
- Cable USB
- Mini soporte
- Funda protectora
- Manual de instrucións (este documento)
Produto rematadoview
The Godox V860III flash unit incorporates several features designed to enhance your photography experience.
Modeling Light for Pre-visualization
Image: The modeling light on the V860III flash head, used for previewcreando efectos de luz.
Hai unha luz de modelado integrada no cabezal do flash para axudar na preparaciónviewing the light effect before shooting. This feature includes 10-level dimmable brightness, allowing for precise adjustment and better visualization of lighting techniques.
Quick Switch for Mode Control
Image: The quick switch button on the V860III for fast toggling between Manual (M) and TTL modes.
The V860III features a quick switch button, enabling rapid transitions between Manual (M) and TTL (Through-The-Lens) flash modes for efficient workflow.
Zoomable Flash Head
Image: The LCD display of the V860III showing zoom settings, with a hand adjusting the control dial.
The flash head offers a zoom range from 20mm to 200mm, adjustable automatically or manually. This allows for precise control over the light spread, whether for broad coverage or focused illumination.
Configuración
1. Instalación da batería
- Asegúrese de que a unidade de flash estea apagada.
- Localice o compartimento da batería no lateral da unidade de flash.
- Abra a tapa do compartimento da batería.
- Insert the VB26 Li-Ion battery, aligning the contacts correctly.
- Peche a tapa do compartimento da batería ata que encaixe firmemente no seu lugar.
2. Cargando a batería
- Conecte o cargador de batería a unha toma de corrente.
- Insert the VB26 battery into the charger.
- The charging indicator on the charger will show the charging status. Charge until the indicator shows a full charge.
- Desconecte o cargador unha vez que se complete a carga.
3. Mounting the Flash on a Camera
- Asegúrate de que tanto a cámara como o flash estean apagados.
- Desliza a base de montaxe do flash na zapata de flash da cámara.
- Rotate the locking ring or lever on the flash unit clockwise until it is securely fastened to the hot shoe. Do not overtighten.
Instrucións de funcionamento
1. Acendido/apagado
- Para acender, deslice o interruptor de alimentación á posición "ON".
- Para apagar, deslice o interruptor de alimentación á posición "OFF".
2. TTL Automatic Flash Mode
- Press the 'TTL/M' quick switch button to select TTL mode. The LCD display will show 'TTL'.
- In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure.
- You can adjust Flash Exposure Compensation (FEC) using the control dial to fine-tune exposure.
3. Manual Flash Mode
- Press the 'TTL/M' quick switch button to select Manual mode. The LCD display will show 'M'.
- In Manual mode, you set the flash output power manually. Use the control dial to adjust the power from 1/1 (full power) to 1/256 (minimum power).
4. Wireless Flash Operation
The V860III supports both optical and 2.4G wireless transmission for off-camera flash control.
- Modo sen fíos 2.4G: Press the 'SYNC' button to enter wireless mode. Use the control dial and function buttons to set the flash as a Master or Slave unit, select channels, and groups. Refer to the detailed wireless section in the full manual for advanced settings.
- Optical Pulse Mode: This mode uses light pulses for communication. Ensure a clear line of sight between the master and slave units.
5. Adjusting Flash Settings
- Zoom: Press the 'ZOOM' button and use the control dial to manually adjust the flash head's zoom position.
- Luz de modelado: Press the dedicated modeling light button to turn it on/off and use the control dial to adjust its brightness.
- Sincronización de alta velocidade (HSS): Activate HSS through the camera's flash menu or the flash unit's settings if supported by your camera model.
Mantemento
- Limpeza: Use un pano suave e seco para limpar a unidade de flash. Para a sucidade persistente, un pano lixeiramente secoamp cloth can be used, followed by a dry cloth. Do not use strong detergents or solvents.
- Almacenamento: Cando non o use durante períodos prolongados, retire a batería e garde o flash nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
- Coidado da batería: Recarga a batería regularmente, mesmo se non a estás a usar, para manter a súa vida útil. Evita descargar a batería por completo.
Resolución de problemas
If you encounter issues with your flash unit, refer to the table below for common problems and solutions.
| Problema | Causa posible | Solución |
|---|---|---|
| O flash non se dispara. | Batería baixa; configuración incorrecta da cámara/flash; flash non está montado correctamente. | Charge or replace battery; check flash mode (TTL/M) and camera settings; ensure flash is firmly attached to hot shoe. |
| A saída do flash é demasiado brillante/escura. | Compensación da exposición do flash (FEC) ou axuste manual da potencia incorrecto. | Adjust FEC in TTL mode or manual power level in M mode. Check camera ISO and aperture settings. |
| O disparador sen fíos non funciona. | Configuración incorrecta da canle/grupo; distancia demasiado longa; interferencias. | Verify master and slave units are on the same channel and group; reduce distance; check for obstructions. |
| O cabezal do flash non fai zoom. | Flash in manual zoom mode; mechanical obstruction. | Ensure flash is in auto zoom mode or manually adjust zoom; check for any physical obstructions. |
Se o problema persiste despois de probar estas solucións, póñase en contacto co servizo de atención ao cliente.
Especificacións
- Marca: GODOX
- Número de modelo: V860IIIS
- Montaxes compatibles: Sony Alpha
- Tecnoloxía de comunicación sen fíos: Optical Pulse, Radio Frequency (2.4G)
- Fonte de enerxía: Li-Ion Battery (VB26)
- Rango de zoom: 20-200 mm (Automático/Manual)
- Luz de modelado: Regulable en 10 niveis
- ASIN: B09PRPXNLD
Garantía e Soporte
Para obter información sobre a garantía e asistencia técnica, consulte a tarxeta de garantía incluída co produto ou visite o sitio web oficial de Godox. websitio. Garde o recibo da compra como xustificante de compra para reclamacións de garantía.
