1. Introdución
This manual provides essential information for the proper installation, operation, and maintenance of your Shanrya Pressure Regulator Valve Part. This component is designed to connect air compressors and air pressure switches, facilitating the connection of the entire air pressure system. It is compatible with M5, G1/4, and G1/8 connection types.
2. Información de seguridade
- Always ensure the air system is depressurized before attempting installation, removal, or maintenance.
- Wear appropriate personal protective equipment (PPE), including eye protection, during installation and operation.
- Do not overtighten connections, as this may damage the threads or the component itself. Refer to recommended torque specifications if available for your specific air system.
- Verify that all connections are secure and leak-free before operating the air system.
- Ensure the component's specifications match the requirements of your air system.
3. Contido do paquete
O paquete inclúe os seguintes elementos:
- 1 x Pressure Regulator Valve Fit Part
4. Produto rematadoview e Compoñentes
The Shanrya Pressure Regulator Valve Part is constructed from a durable aluminum alloy, offering a lightweight yet strong solution for air system connections. It features multiple ports for versatile integration into various pneumatic setups. The central orange knob allows for pressure adjustment.
Figura 1: De arriba abaixo view of the Pressure Regulator Valve Part, showing the central orange adjustment knob and multiple connection ports.
Figura 2: En ángulo view of the Pressure Regulator Valve Part, illustrating the arrangement of threaded ports and the pressure regulator.
Figure 3: Detailed diagram indicating the thread diameters and types (M5, G1/4, G1/8) for each connection point on the valve part.
Figure 4: Overall dimensions of the Pressure Regulator Valve Part, measuring 102mm (4.02in) in width and 181mm (7.13in) in length.
5. Configuración e instalación
Before installation, ensure that the appropriate size and thread type (M5, G1/4, or G1/8) are matched to your existing air compressor and pressure switch components. Incorrect sizing can lead to leaks or damage.
- Sistema de despresurización: Turn off the air compressor and release all pressure from the system before beginning any work.
- Identificar os puntos de conexión: Locate the connection points on your air compressor and pressure switch where this part will be installed.
- Preparación do fío: Apply appropriate thread sealant (e.g., PTFE tape) to the male threads of your air system components before connecting them to the valve part.
- Conectar compoñentes: Carefully thread the air compressor and pressure switch components into the corresponding ports on the Shanrya Pressure Regulator Valve Part. Hand-tighten first to avoid cross-threading.
- Conexións seguras: Using a suitable wrench, gently tighten the connections. Avoid excessive force to prevent damage to the aluminum alloy threads.
- Comprobación de fugas: Once all connections are secure, slowly repressurize the air system and check for any air leaks using a soapy water solution. Bubbles indicate a leak. If leaks are detected, depressurize the system and re-tighten the affected connection.
6. Instrucións de funcionamento
The integrated pressure regulator allows for adjustment of the output air pressure. To operate:
- Axuste de presión: Rotate the orange knob on the regulator to increase or decrease the desired output pressure. Turning clockwise typically increases pressure, while counter-clockwise decreases it.
- Monitor de presión: If your system includes a pressure gauge connected to this manifold, monitor the gauge while adjusting to achieve the precise pressure setting required for your tools or application.
7. Mantemento
Regular maintenance ensures optimal performance and longevity of the pressure regulator valve part.
- Inspeccionar por fugas: Periodically check all connections for air leaks, especially after heavy use. Address any leaks promptly.
- Exterior limpo: Keep the exterior of the component clean from dust and debris. Use a soft, dry cloth. Avoid harsh chemicals that may damage the aluminum finish.
- Comprobar se hai danos: Inspect the component for any signs of physical damage, cracks, or excessive wear. Replace the part if any significant damage is observed.
8 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Fugas de aire nas conexións | Loose connection, insufficient thread sealant, damaged threads. | Depressurize system, re-tighten connections, reapply thread sealant, or replace if threads are damaged. |
| Inconsistent pressure output | Regulator malfunction, debris in regulator. | Ensure regulator knob is properly adjusted. If problem persists, the regulator may need replacement. |
| Part does not fit | Incorrect thread size or model. | Verify the thread specifications (M5, G1/4, G1/8) against your system's requirements. Ensure the correct part was ordered. |
9. Especificacións
| Característica | Especificación |
|---|---|
| Tipo de elemento | Pressure Regulator Valve Fit Part |
| Material | Aliaxe de aluminio |
| Connection Hole Screw Hole Models | M5, G1/4, G1/8 |
| Finalidade | Connecting bracket for air compressor and air pressure switch, used to connect air pressure system |
| Peso do elemento | 10.2 onzas |
| Dimensións do paquete | 9.13 x 5.91 x 3.31 polgadas |
| Número de peza do fabricante | Shanryawhkcdua63i5073 |
10. Información da garantía
Specific warranty details for this product are not provided in the available information. Please refer to the retailer or manufacturer's official websitio web para coñecer os termos e condicións de garantía aplicables.
11. Soporte e contacto
For technical assistance, product inquiries, or support, please contact the manufacturer or your point of purchase. Contact information is typically available on the product packaging or the official brand websitio.