Manual do usuario do medidor de pintura Elcometer 311 FNF Modelo T

1. Introdución

The Elcometer 311 FNF Model T is an advanced automotive refinish paint meter designed for fast and accurate measurement of paint thickness on both steel and aluminum substrates. This robust device provides reliable readings in both mils and microns, making it an essential tool for automotive professionals and enthusiasts. Its ergonomic design, durable construction, and wireless connectivity enhance user experience and data management.

Elcometer 311 FNF Model T paint meter, front view, displaying a reading of 70 µm.

This image shows the Elcometer 311 FNF Model T paint meter from the front. The device has an orange and black casing with a digital display showing a measurement of 70 micrometers. Below the screen are several control buttons.

Características principais:

Fast Reading Rate: Achieves 60+ readings per minute, significantly reducing inspection times.
Dual Unit Measurement: Easily switch between mils and microns with a push of a button.
Deseño robusto: Dust and waterproof equivalent to IP64, suitable for various environmental conditions.
Durable Display: Scratch, solvent, and water-resistant color display for enhanced protection.
Comodidade ergonómica: Designed for maximum comfort during extended use.
Automatic Display Rotation: Ensures readability on horizontal and vertical surfaces.
Sensor de luz ambiental: Adjusts display brightness for optimal visibility in any lighting.
Conectividade Bluetooth: Wirelessly connect to inspection apps or ElcoMaster for seamless reporting.

2. Configuración

2.1 Desembalaxe

Carefully remove the Elcometer 311 FNF Model T from its packaging. Inspect the device for any signs of damage. Retain the packaging for future storage or transport.

2.2 Instalación da batería

The Elcometer 311 requires 2 AA batteries, which are included. To install:

Localiza a tapa do compartimento da batería na parte traseira do dispositivo.
Deslice ou solte a tapa para abrila.
Insira as 2 pilas AA, asegurándose de manter a polaridade correcta (+/-) como se indica no interior do compartimento.
Coloque a tapa do compartimento da batería de forma segura.

2.3 Encendido inicial

Press and hold the power button (usually located centrally below the screen) until the display illuminates. The device will perform a brief self-test before entering measurement mode.

2.4 Conexión Bluetooth

The Elcometer 311 features Bluetooth connectivity for data transfer to compatible inspection apps or ElcoMaster software. To connect:

Asegúrate de que o Bluetooth estea activado no teu teléfono intelixente ou tableta.
Open the ElcoMaster app or your preferred inspection application.
Follow the app's instructions to search for and pair with the Elcometer 311. The meter's Bluetooth indicator will typically illuminate when connected.

Diagram illustrating the Elcometer 311 paint meter wirelessly connected via Bluetooth to a smartphone displaying measurement data.

This diagram shows the Elcometer 311 paint meter on the left, with a measurement of 120 micrometers. To its right, a smartphone is displayed, also showing a measurement of 120.0 micrometers, demonstrating the meter's Bluetooth connectivity and data transfer capability to a mobile device.

3. Instrucións de funcionamento

3.1 Tomar unha medida

To obtain an accurate paint thickness reading:

Ensure the meter is powered on.
Place the probe of the Elcometer 311 firmly and flatly onto the painted surface you wish to measure.
Hold the meter steady. The reading will appear almost instantly on the display.
Lift the meter from the surface to prepare for the next reading. The fast reading rate allows for quick successive measurements.

Hand holding Elcometer 311 paint meter against a silver car panel, displaying a reading of 5.5.

Hand holding Elcometer 311 paint meter against a dark surface, displaying a reading of 4.5 mils.

Left: A hand is shown holding the Elcometer 311 paint meter against the silver painted surface of a car, near the headlight. The meter's display shows a reading of 5.5, indicating a paint thickness measurement. Right: This image features a hand holding the Elcometer 311 paint meter against a dark, possibly black, painted surface. The meter's screen clearly shows a reading of 4.5 mils, indicating the paint thickness.

3.2 Changing Measurement Units (Mils/Microns)

The Elcometer 311 allows you to switch between mils and microns. Refer to your device's specific button layout for the 'Units' or 'Mode' button. Typically, a short press of this button will toggle between the two measurement units.

3.3 Comprensión das lecturas

The display will show the measured paint thickness. The unit (mils or µm/microns) will be indicated next to the numerical value. The automatic rotating display ensures the reading is always upright, regardless of the meter's orientation. The ambient light sensor adjusts screen brightness for optimal visibility.

The device is designed to operate reliably in both wet and dry conditions due to its IP64 dust and waterproof rating.

4. Mantemento

4.1 Limpeza

The Elcometer 311 features a scratch, solvent, and water-resistant display. To clean the device:

Limpe o exterior cun suave, damp pano.
For stubborn marks, use a mild, non-abrasive cleaning solution.
Avoid using harsh chemicals or abrasive materials that could damage the casing ou pantalla.
Ensure the probe tip is clean and free of debris for accurate measurements.

4.2 Substitución da batería

When the battery indicator on the display shows low power, replace the AA batteries as described in Section 2.2. Always use fresh, high-quality batteries.

4.3 Almacenamento

Store the Elcometer 311 in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, it is recommended to remove the batteries to prevent leakage.

5 Solución de problemas

This section addresses common issues you might encounter with your Elcometer 311.

Problema	Causa posible	Solución
O medidor non se acende.	Baterías gastadas ou instaladas incorrectamente.	Substitúa as pilas, asegurándose de que a polaridade sexa correcta.
Lecturas inexactas.	Dirty probe tip; incorrect calibration; surface irregularities.	Clean probe tip; perform calibration (refer to full manual for calibration steps); ensure surface is clean and flat.
Problemas de conexión Bluetooth.	Bluetooth not enabled on device/phone; meter out of range; app issues.	Ensure Bluetooth is on for both devices; move meter closer to phone/tablet; restart app or meter.
A pantalla está escura ou ilexible.	Batería baixa; condicións de iluminación extremas.	Replace batteries; allow ambient light sensor to adjust, or move to a more suitable lighting environment.

6. Especificacións

Detailed specifications for the Elcometer 311 FNF Model T:

Especificación	Detalle
Fabricante	Elcómetro
Marca	Elcómetro
Peso do elemento	5.5 onzas (156 gramos)
Dimensións do produto	5.55 x 2.87 x 1.46 polgadas (14.1 x 7.3 x 3.7 cm)
Número de modelo do artigo	311
Número de peza do fabricante	A311CFNFTI
Baterías	2 pilas AA necesarias (incluídas)
Características especiais	Waterproof (IP64 equivalent)
Data de primeira dispoñibilidade	7 de setembro de 2015

7. Garantía e soporte

7.1 Información da garantía

Specific warranty terms for the Elcometer 311 FNF Model T are typically provided with the product at the time of purchase or can be found on the official Elcometer website. Please refer to your product documentation or visit the manufacturer's website for detailed warranty coverage and registration information.

7.2 Atención ao cliente

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Elcometer customer support directly. You can find contact information and additional resources on the official Elcometer websitio:

www.elcometer.com

You may also visit the Elcometer store on Amazon for product information and related accessories: Elcometer Amazon Store

	Medidor de espesor de revestimento Elcometer 456 \| Medición dixital do espesor da película Discover the Elcometer 456, a versatile digital coating thickness gauge offering high accuracy, reliability, and efficiency for measuring dry film thickness on various substrates. Features include a large color display, multiple probes, data logging, and connectivity with ElcoMaster software.
	Medidor de espesor de revestimento Elcometer 456: características, especificacións e sondas Rematada integralview do medidor dixital de espesor de revestimentos Elcometer 456, incluíndo os seus modelos separados e integrados, características, especificacións técnicas, compatibilidade de sondas, accesorios e opcións de calibración.
	Guía do usuario do medidor de pintura e po Elcometer 415 Guía do usuario do medidor de pintura e po Elcometer 415, que detalla as súas características, funcionamento, calibración, especificacións técnicas e accesorios para medir o grosor do revestimento en superficies lisas.
	Instrucións de funcionamento dos modelos básicos de Elcometer 456 Instrucións de funcionamento detalladas para o medidor de espesor de revestimentos Elcometer 456 Basic Models, que abarcan características, configuración, calibración, medición, datos técnicos e información de servizo de Elcometer Instruments Ltd.
	Instrucións de funcionamento do medidor de espesor de revestimento Elcometer 456 Aprende a usar o medidor de espesor de revestimentos Elcometer 456 con esta guía. Abarca as características, a calibración, as estatísticas, a transferencia de datos e os detalles da sonda para unha inspección precisa dos revestimentos.
	Guía do usuario de peites e rodas de película húmida Elcometer Guía do usuario para os peites e rodas de película húmida Elcometer 112, 115, 154, 3230, 3236 e 3238. Aprenda a medir con precisión o grosor da película húmida con procedementos detallados e especificacións técnicas.

Elcometer 311 FNF Model T