Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) Instruction Manual

1. Introdución e finalview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W. Please read all instructions carefully before use and retain this manual for future reference.

The Stelpro ASHC2002W is an economical wall-mounted convector heater designed to provide dependable, quiet convection heating for spaces up to 200 square feet. It features a slim design, a built-in electronic thermostat, and a durable finish, making it suitable for various indoor environments.

Image 1.1: Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)

2. Información de seguridade

WARNING: This heater is hardwired only and is NOT a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

• Lea todas as instrucións antes de instalar ou usar este aquecedor.
• Asegúrese de desconectar a alimentación eléctrica no disxuntor principal antes da instalación ou o mantemento.
• Do not install the heater closer than 3 feet (0.9 m) from the front of the heater and away from the side and rear of any combustible materials (e.g., curtains, draperies, furniture).
• Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored.
• Este aquecedor está deseñado só para uso interior.
• Keep the top air discharge grille clear of obstructions to ensure proper airflow.

3. Contido do paquete

Verifique que todos os compoñentes estean presentes e estean intactos ao abrir o envase:

• Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
• Concealed Mounting Bracket
• Back Entry Plate with Cable Clamps
• Ferraxes de instalación (parafusos, ancoraxes)
• Manual de instrucións

4. Especificacións

Imaxe 4.1: Dimensións do produto

5. Instalación

IMPORTANT: This heater requires a 240V (or 208V) hardwired connection. It is not a plug-in unit. All wiring must be done by a qualified electrician.

Image 5.1: Hardwired Connection Requirement

5.1 Montaxe do calefactor

1. Choose a suitable wall location, ensuring at least 3 feet (0.9 m) clearance from any combustible materials in front, and adequate clearance from sides and rear.
2. Use the provided mounting bracket and hardware. The heater is designed for surface-mount installation.
3. Mark the drilling points on the wall using the concealed bracket as a template.
4. Drill pilot holes and insert the appropriate wall anchors (if needed for drywall).
5. Fixe o soporte de montaxe á parede cos parafusos proporcionados.
6. Ensure the bracket is level and securely fastened to support the heater's weight.

Image 5.2: Concealed Mounting Bracket

5.2 Cableado eléctrico

1. Asegúrese de que a alimentación estea DESCONECTADA no disxuntor principal.
2. Route the 240V (or 208V) electrical supply wires to the heater's back entry plate.
3. Connect the supply wires to the heater's terminals using the cable clamps, following the wiring diagram in the full owner's manual.
4. Secure all connections and ensure no bare wires are exposed.
5. Carefully attach the heater to the mounted bracket, ensuring it locks into place.
6. Restablecer a corrente no disxuntor principal.

6. Instrucións de funcionamento

Your Stelpro convector heater features a built-in electronic thermostat for precise temperature control.

Image 6.1: Built-in Electronic Thermostat

6.1 Axustar a temperatura

• Use the up/down arrows on the thermostat's LCD screen to adjust the desired room temperature.
• O quentador manterá automaticamente a temperatura establecida.

6.2 Modos de funcionamento

• Modo automático: This mode can be programmed to automatically lower the temperature at night, contributing to energy savings. Refer to the full owner's manual for programming details.
• Modo de seguridade: This feature allows you to lock the maximum setpoint temperature for safety, preventing accidental or unauthorized adjustments to higher temperatures.

7. Mantemento

Un mantemento regular garante un rendemento óptimo e unha maior duración do teu quentador.

• Limpeza: Ensure the heater is turned off and cool before cleaning. Use a soft, damp pano para limpar o exterior. Non empregue produtos de limpeza abrasivos nin disolventes.
• Air Grilles: Periodically check the air intake (bottom) and discharge (front) grilles for dust or debris accumulation. Gently vacuum or brush away any blockages to maintain efficient airflow.
• Inspección anual: It is recommended to have a qualified electrician inspect the heater and its wiring connections annually.

8 Solución de problemas

If your heater is not operating correctly, consult the following common issues before contacting support:

• O quentador non se acende: Check the main circuit breaker to ensure power is supplied. Verify that the heater is securely mounted to the wall, as it contains a safety switch that prevents operation if not properly installed.
• Calor insuficiente: Ensure the thermostat is set to a temperature higher than the current room temperature. Check for any obstructions around the air grilles. Verify the heater's wattage matches the room size (up to 200 sq ft for 2000W/240V).
• Ruídos pouco comúns: While designed for quiet operation, minor expansion/contraction noises may occur during heating/cooling cycles. If loud or persistent noises occur, disconnect power and contact support.
• Problemas coa pantalla do termostato: If the LCD display is blank or erratic, try resetting the circuit breaker for a few minutes.

For persistent issues or complex problems, please refer to the warranty and support section.

9. Garantía e soporte

Your Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) is backed by the following warranties:

• Garantía limitada de 5 anos on the overall unit.
• Garantía de por vida no elemento calefactor.
• 3 ano de garantía on electronic components.

For technical support, warranty claims, or further assistance, please contact Stelpro customer service. Refer to the contact information provided in your owner's manual or visit the official Stelpro websitio.