Xigmatek LUX S Arctic Mid-Tower PC Case EN48298 Instruction Manual

1. Produto rematadoview

The Xigmatek LUX S Arctic (Model EN48298) is a mid-tower PC case designed for computer enthusiasts and gamers. It features a distinctive triangular mesh front panel for optimal airflow and comes equipped with four 120mm X24A A-RGB fans to provide efficient cooling and customizable lighting. The case supports Micro ATX motherboards and is constructed with durable materials, including tempered glass for a clear view de compoñentes internos.

Figura 1.1: Fronte view of the Xigmatek LUX S Arctic PC case, showcasing the triangular mesh design and the pre-installed A-RGB fans.

2. Contido do paquete

Before proceeding with installation, please ensure all components listed below are present in your package. If any items are missing or damaged, contact your retailer or Xigmatek support.

• Xigmatek LUX S Arctic Mid-Tower PC Case
• 4 x 120mm X24A A-RGB Fans (pre-installed)
• Accessory box (screws, cable ties, standoffs, user manual)

3. Configuración e instalación

Follow these steps to install your computer components into the Xigmatek LUX S Arctic PC case. Ensure your system is powered off and unplugged before beginning any installation.

3.1. Preparación do caso

1. Coloque a caixa sobre unha superficie plana e estable.
2. Carefully remove the tempered glass side panel by unscrewing the thumb screws at the rear of the case and gently pulling the panel away.
3. Remove the opposite side panel (metal) in a similar manner to access the cable management area.

Figura 3.1: Interior view of the PC case, illustrating the spacious layout for component installation.

3.2. Instalación da placa base

1. Instala a protección de E/S que veu coa placa base na abertura designada na parte traseira da caixa.
2. Align your Micro ATX motherboard with the pre-installed standoffs. Ensure all screw holes on the motherboard match the standoffs.
3. Secure the motherboard using the provided screws from the accessory box. Do not overtighten.

3.3. Instalación da fonte de alimentación (PSU)

1. Locate the PSU mounting area at the rear bottom of the case.
2. Slide your PSU into the bay from the rear, ensuring the fan faces the bottom (if the case has a filtered intake) or upwards.
3. Fixe a fonte de alimentación con parafusos desde a parte traseira exterior da caixa.

3.4. Instalación da unidade de almacenamento

The case supports various storage configurations. Refer to the accessory box for specific mounting hardware.

• SSD de 2.5 polgadas: Mount SSDs to the designated brackets behind the motherboard tray.
• Discos duros de 3.5 polgadas: Install HDDs into the drive cage located beneath the PSU shroud.

Figura 3.2: Interior traseiro view, highlighting cable management cutouts and storage drive mounting locations.

3.5. Expansion Card Installation (GPU, etc.)

1. Retire as tapas das ranuras PCIe necesarias da parte traseira da caixa.
2. Insert your expansion card (e.g., graphics card) into the corresponding PCIe slot on your motherboard until it clicks into place.
3. Fixe a tarxeta cun parafuso á carcasa.

3.6. Xestión de cables e conexións

Connect all necessary cables from the PSU to your motherboard and components. Utilize the cable routing cutouts and tie-down points behind the motherboard tray for a clean build and improved airflow.

• Connect front panel headers (Power SW, Reset SW, HDD LED, Power LED) to the motherboard.
• Connect USB 2.0 and USB 3.0 headers to the motherboard.
• Connect audio header to the motherboard.
• Connect the pre-installed A-RGB fans to your motherboard's A-RGB header or a compatible controller. Ensure power is supplied to the fan hub/controller if applicable.

4. Instrucións de funcionamento

Unha vez instalados todos os compoñentes e conectados os cables, podes acender o sistema.

1. Replace both side panels and secure them with their respective screws.
2. Connect your monitor, keyboard, mouse, and power cable to the rear of your PC.
3. Flip the power switch on your PSU to the 'ON' position.
4. Press the power button on the front panel of the case.
5. The pre-installed A-RGB fans will illuminate. You can control their lighting effects via your motherboard's software (if connected to an A-RGB header) or a dedicated controller (if included with the fans or purchased separately).

5. Mantemento

Un mantemento regular axuda a garantir un rendemento óptimo e unha maior duración dos compoñentes do teu PC.

• Filtros de po: The Xigmatek LUX S Arctic case likely includes removable dust filters (e.g., top, bottom, front). Clean these filters every 1-3 months, depending on your environment, by gently brushing or washing them with water and allowing them to dry completely before reinstallation.
• Limpeza de interiores: Periodically (every 6-12 months), open the case and use compressed air to remove dust buildup from fans, heatsinks, and other components. Hold fan blades gently to prevent them from spinning too fast during cleaning.
• Limpeza exterior: Limpe as superficies exteriores cun suave, damp cloth. Avoid harsh chemicals that may damage the finish or tempered glass.

6 Solución de problemas

If you encounter issues with your PC build, refer to these common troubleshooting steps.

• O sistema non se acende:
  • Asegúrese de que o interruptor da fonte de alimentación estea na posición "ON".
  • Check all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected.
  • Verify front panel power switch header is correctly connected to the motherboard.
• Fans Not Spinning/RGB Not Lighting Up:
  • Check fan power connections to the motherboard or fan hub.
  • Ensure A-RGB cables are correctly connected to the motherboard's A-RGB header or controller.
  • Verify that any fan hub or controller is receiving power.
• Sen saída de visualización:
  • Ensure your monitor cable is connected to the graphics card (not the motherboard's integrated graphics ports, unless you are using integrated graphics).
  • Volva colocar a tarxeta gráfica na súa ranura PCIe.
  • Comproba as conexións de alimentación da tarxeta gráfica.

For more complex issues, consult your motherboard manual or component manufacturer's support resources.

7. Especificacións

8. Garantía e soporte

For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your product or visit the official Xigmatek websitio.

Visit Xigmatek Official Websitio