Insta360 Power Selfie Stick User Manual

Produto rematadoview

The Insta360 Power Selfie Stick is an accessory designed to extend the reach of your camera while providing additional power and remote control capabilities. It is compatible with various Insta360 camera models, enhancing shooting flexibility for third-person perspectives and extended usage.

Fronte view of the Insta360 Power Selfie Stick, showcasino seu elegante deseño negro e os botóns de control.

Contido do paquete

• 1x Insta360 Power Selfie Stick
• 1 cable de tipo C a tipo C

Compatibilidade

This Power Selfie Stick is compatible with the following Insta360 camera models:

• Insta360 X4
• Insta360 GO 3S
• Insta360 Ace Pro
• Insta360 Ace
• Insta360 GO 3
• Insta360 X3
• Insta360 ONE RS 1-Inch 360 Edition
• Insta360 ONE RS (4K/Twin)
• Insta360 ONE X2
• Insta360 ONE R

Note: When using with Insta360 Ace Pro & Ace, a separate Quick Release Mount is required.

Invisible Selfie Stick Effect Compatibility

The "Invisible Selfie Stick" effect, where the stick is automatically removed from 360-degree footage, is only supported by cameras with a dual-lens design.

Configuración

1. Engade a túa cámara: Securely mount your compatible Insta360 camera to the 1/4" screw at the top of the selfie stick. Ensure the camera is firmly attached to prevent accidental detachment.
2. Connecting for Power and Control: Use the provided Type-C to Type-C cable to connect your camera to the USB-C Port (1) on the selfie stick. This connection enables both power transfer and remote control functionality.
3. Extending the Stick: Gently pull the extension rod to extend the selfie stick to your desired length.

The Insta360 Power Selfie Stick with an Insta360 camera attached, demonstrating the cable connection for power and control.

A couple using the Insta360 Power Selfie Stick to capture footage while walking outdoors, demonstrating its extended reach.

Instrucións de funcionamento

Controis e indicadores

Diagram illustrating the various components and controls of the Insta360 Power Selfie Stick, including USB-C ports, knob, extension rod, LED indicators, battery button, power button, and shutter button.

Un primeiro plano view of the control panel on the Insta360 Power Selfie Stick, showing the LED indicators, power, battery, and shutter buttons.

• Indicadores LED: Display battery status and operational mode.
• Botón de batería: Press to check the battery level of the selfie stick.
• Botón de encendido: Press and hold to power on/off the selfie stick.
• Botón do obturador: Press to trigger photo capture or video recording on the connected camera.

Charging the Selfie Stick

Connect the selfie stick to a power source using a USB-C cable via USB-C Port (2). The LED indicators will show charging progress. A full charge typically takes approximately 2.5 hours.

Control remoto da cámara

The integrated buttons allow for convenient remote control of your camera's functions, including starting/stopping recording and changing modes, without directly touching the camera. The built-in 4500mAh battery can significantly extend your camera's operational time, providing up to 5 hours of additional power.

Mantemento e coidados

• Exposición á auga: The selfie stick should never come into contact with liquid of any kind. Do not use it in the rain or submerge it in water.
• Limpeza: Wipe the stick with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials that could damage the surface.
• Almacenamento: Store the selfie stick in a dry, cool place away from direct sunlight and extreme temperatures.
• Xestión de cables: Ensure the Type-C cable is properly routed and not subjected to excessive bending or strain, which could damage the cable or ports.

Resolución de problemas

• Selfie Stick Not Powering On:
  • Ensure the battery is charged. Connect to a power source and check LED indicators.
  • Press and hold the Power Button for a few seconds to ensure it's not just a short press.
• Camera Not Responding to Controls:
  • Verify the Type-C to Type-C cable is securely connected between the selfie stick and the camera.
  • Ensure the camera model is listed as compatible with the remote control features.
  • Check camera settings to ensure external control or accessory connection is enabled if applicable.
• No 1/4" Screw on Bottom:
  • The Insta360 Power Selfie Stick does not feature a 1/4" screw mount on its base. This design choice means it cannot be directly mounted to standard tripods or other accessories requiring this type of screw.
• Rattling Noise:
  • Some users have reported minor rattling noises. If the noise significantly impacts video quality, ensure all parts are securely tightened. If the issue persists, contact Insta360 support.
• USB-C Cable Visibility:
  • The included USB-C cable may be visible in some shots, especially with non-360 cameras or specific shooting angles. Adjust cable routing or shooting angles to minimize visibility. For 360 cameras, the "Invisible Selfie Stick" effect helps to remove the stick and cable from the final stitched footage.

Especificacións

Garantía e Soporte

For warranty information, technical support, or service inquiries, please visit the official Insta360 websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o recibo da compra como proba de compra para calquera reclamación de garantía.

Official Insta360 Websitio: www.insta360.com

Insta360 Store on Amazon: Insta360 Amazon Store