1. Introdución
The ECLER WARM2 is a professional two-channel analogue rotary DJ mixer, meticulously designed and manufactured by ECLER in Barcelona. It is engineered to deliver a warm and crystal-clear analogue sound, a characteristic hallmark of ECLER mixers. This manual provides essential information for the proper setup, operation, and maintenance of your WARM2 mixer, ensuring optimal performance and longevity.
2. Instrucións de seguridade
Please read and follow these safety instructions carefully to prevent damage to the unit and ensure user safety:
- Fonte de alimentación: Only connect the mixer to a power source with the specified voltage. Asegúrese de que o cable de alimentación non estea danado nin axustado.
- Ventilación: Non bloquee ningunha abertura de ventilación. Asegúrese de que haxa un fluxo de aire axeitado arredor da unidade para evitar o sobrequecemento.
- Humidade: Keep the unit away from water, rain, and excessive humidity. Do not operate with wet hands.
- Limpeza: Disconnect the power before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosols.
- Servizo: Non intente realizar o mantemento da unidade vostede mesmo. Encomende calquera mantemento a persoal de servizo cualificado.
- Colocación: Place the mixer on a stable, level surface. Avoid placing it near heat sources or in direct sunlight.
3. Que hai na caixa
Upon unpacking your ECLER Warm2 mixer, please ensure all the following items are present:
- ECLER Warm2 2-Channel Rotary DJ Mixer
- IEC Main Connector (Power Cable)
- 8 tapas de protección RCA
- Guía de primeiros pasos
Se falta algún elemento ou está danado, póñase en contacto co seu distribuidor inmediatamente.
4. Produto rematadoview
The ECLER Warm2 mixer features a robust design with intuitive controls for a seamless DJ experience. Familiarize yourself with the various components:
Un ángulo view of the ECLER Warm2 rotary DJ mixer, showcasing its compact design, wooden side panels, and the layout of its controls on the top and front panels.
4.1. Controis do panel superior
Un de arriba abaixo view of the ECLER Warm2 mixer's control surface, highlighting the two main channels with their input selectors, gain, EQ (BASS, MID, HIGH), and rotary volume controls. The central section features the Isolator controls (BASS, MID, HIGH) and master output level. The microphone/line input controls are also visible.
- Input Selectors (Channels 1 & 2): Switches between PHONO, LINE, and MICRO inputs for each channel.
- GAIN (Channels 1 & 2): Axusta o nivel de entrada para cada canal.
- EQ (BASS, MID, HIGH - Channels 1 & 2): Three-band equalizer for frequency manipulation on each channel.
- Rotary Volume (Channels 1 & 2): Main volume control for each channel.
- ISOLATOR (BASS, MID, HIGH): A 4th order frequency isolator for creative sound shaping across the master output.
- MESTRE: Controls the overall output volume of the mixer.
- REC/LINE Input (Channel 3): Additional input for recording or an extra line source.
4.2. Controis do panel frontal
The front panel of the ECLER Warm2 mixer, showing the headphone output jacks (6.3mm and 3.5mm), headphone volume control, and the PFL/MIX selector for headphone monitoring.
- Headphone Outputs (6.3mm & 3.5mm): Conecta os teus auriculares aquí.
- VOLUME (Headphones): Axusta o nivel de saída dos auriculares.
- SOURCE (PFL/MIX): Selects between pre-fader listen (PFL) for individual channels or the mixed master output for headphone monitoring.
4.3. Conexións do panel traseiro
The rear panel of the ECLER Warm2 mixer, displaying all input and output connections. This includes the IEC main power input, Booth Output (XLR and RCA), House Output (XLR and RCA), Return/Send for effects, and various inputs for PHONO, LINE, and MICRO sources across the two channels.
- ENTRADA REDE: IEC power connector for the main power cable.
- HOUSE OUTPUTS (XLR & RCA): Main stereo outputs for connecting to your primary sound system.
- BOOTH OUTPUTS (XLR & RCA): Stereo outputs for connecting to booth monitors.
- FX SEND/RETURN: Stereo RCA connections for integrating external effects processors.
- INPUTS (Channels 1 & 2):
- FONO (RCA): Inputs for turntables.
- LINE (RCA): Inputs for CDJs, media players, or other line-level sources.
- MICRO (XLR/TRS Combo): Inputs for microphones.
5. Configuración
Follow these steps to correctly set up your ECLER Warm2 mixer:
5.1. Conexión de alimentación
- Asegúrese de que o interruptor de alimentación da batedora estea na posición de apagado.
- Connect the supplied IEC main connector cable to the MAINS INPUT on the rear panel of the mixer.
- Conecte o outro extremo do cable de alimentación a unha toma de corrente alterna axeitada.
5.2. Conexións de audio
- Fontes de entrada: Connect your turntables to the PHONO inputs and your CDJs or other line-level devices to the LINE inputs using RCA cables. Ensure you match the left and right channels.
- Micrófonos: Connect microphones to the MICRO inputs using XLR or TRS cables.
- Saída principal: Connect your main sound system (e.g., power amplifier, active speakers) to the HOUSE OUTPUTS (XLR or RCA).
- Booth Monitors: Connect your booth monitors to the BOOTH OUTPUTS (XLR or RCA).
- External Effects: If using external effects, connect the SEND output of the mixer to the input of your effects unit, and the output of your effects unit to the RETURN input of the mixer.
6. Instrucións de funcionamento
This section details the basic operation of your ECLER Warm2 mixer.
6.1. Acendido/apagado
- Ensure all volume controls (channel and master) are set to their minimum position before powering on.
- Xire o interruptor de alimentación do panel traseiro á posición ON.
- To power off, reverse the process: lower all volumes, then flip the power switch to OFF.
6.2. Funcionamento da canle
- Seleccione entrada: Use the Input Selector switch for each channel to choose between PHONO, LINE, or MICRO.
- Adjust GAIN: Play your audio source and slowly increase the GAIN knob until the signal level is healthy but not clipping (indicated by the level meters).
- Use EQ: Adjust the BASS, MID, and HIGH knobs to shape the frequency response of your audio.
- Control de volume: Use the large Rotary Volume knob for each channel to control its output level into the mix.
6.3. Master and Isolator Controls
- Volume PRINCIPAL: Once your channels are mixed, slowly raise the MASTER volume knob to control the overall output level to your main sound system.
- AISLADOR: The 4th order ISOLATOR allows for dramatic frequency cuts or boosts across BASS, MID, and HIGH frequencies of the master output, providing powerful creative mixing capabilities.
6.4. Monitorización de auriculares
- Connect your headphones to either the 6.3mm or 3.5mm jack on the front panel.
- Use the SOURCE switch to select between PFL (Pre-Fader Listen) to monitor individual channels before they enter the main mix, or MIX to listen to the master output.
- Adjust the HEADPHONE VOLUME knob to a comfortable listening level.
7. Mantemento
Proper maintenance will extend the life of your ECLER Warm2 mixer:
- Limpeza: Regularly wipe the unit with a soft, dry, lint-free cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the unit. Avoid abrasive cleaners.
- Ventilación: Ensure the ventilation slots are clear of dust and debris. Use compressed air to gently clear them if necessary.
- Almacenamento: Cando non a empregue durante períodos prolongados, garde a batedora nun lugar fresco e seco, idealmente na súa embalaxe orixinal ou nunha funda protectora.
- Knobs and Faders: Avoid excessive force when operating knobs and switches.
8 Solución de problemas
If you encounter issues with your ECLER Warm2 mixer, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| Sen saída de son | Power off; cables disconnected; volume down; incorrect input selected. | Check power, all audio connections, master and channel volumes, and input selectors. |
| Son distorsionado | Input GAIN too high; master volume too high; faulty cable. | Reduce GAIN and master volume. Test with different cables. |
| Zumbido ou zumbido | Bucle de terra; cables avariados; interferencias doutros dispositivos electrónicos. | Ensure proper grounding. Use shielded cables. Try isolating the mixer from other electronics. |
| Os auriculares non funcionan | Headphone volume down; SOURCE switch incorrect; faulty headphones. | Increase headphone volume. Check SOURCE switch. Test with another pair of headphones. |
If the problem persists after trying these solutions, please contact ECLER customer support or a qualified service technician.
9. Especificacións
Key technical specifications for the ECLER Warm2 2-Channel Rotary DJ Mixer:
- Número de modelo: WARM-2
- Número de canles: 2
- Tecnoloxía de conectividade: Analóxico
- Fonte de enerxía: Eléctrico con cable
- Cor: Negro
- Peso do artigo: 7.9 libras
- Entradas: 2x PHONO (RCA), 2x LINE (RCA), 1x MICRO (XLR/TRS Combo), 1x REC/LINE (RCA)
- Saídas: 1x HOUSE (XLR & RCA), 1x BOOTH (XLR & RCA), 1x FX SEND (RCA), 1x FX RETURN (RCA), 2x Headphone (6.3mm & 3.5mm)
- EQ: 3-band per channel
- Illante: 4th order, 3-band (BASS, MID, HIGH)
10. Garantía e soporte
ECLER products are manufactured to the highest standards and come with a limited warranty against defects in materials and workmanship. Please refer to the 'First Steps Guide' included in your package for specific warranty terms and conditions applicable to your region.
For technical support, service, or warranty claims, please contact your authorized ECLER dealer or visit the official ECLER website for contact information and support resources. When contacting support, please have your product model number (WARM-2) and purchase information ready.
ECLER Official Websitio: www.ecler.com
